320mm front rotors and rear disc conversion installed - Toyota Yaris Forums

vten · 06-25-2009, 10:52 PM

A friend which a toyota tech help me out with these

sorry for the blurry phone pics , will update soon.

I really need the big front caliper from Garm ....

the fit and finish is awesome

thanks Garm

Brian · 06-25-2009, 11:03 PM

Looks good. Reminds me I need to paint my rear calipers.

vten · 06-25-2009, 11:06 PM

while waiting for Garm to finish up the wilwood project ... I bought this

flame suit on !!!

cali yaris · 06-25-2009, 11:27 PM

THAT LOOKS AWESOME.

as long as the Brembo's are made for the correct width rotor (~22mm for Yaris, I think), you are ok. If not, you're setting up a dangerous combination.

vten · 06-25-2009, 11:47 PM

it's not the real brembo caliper , Garm ....its the brembo caliper cover from thailand

, but the material is fiberglass instead of a thin plastic that easily melts..

cali yaris · 06-25-2009, 11:53 PM

oh.

I got the Wilwood calipers I'm going to use for the brake kit today, they look really nice.

vten · 06-25-2009, 11:57 PM

ooohhh shoot me a pics please ....dwitan@yahoo.com, it should work on my oversize rotor right ?

cali yaris · 06-26-2009, 12:01 AM

Yes the 4-pot caliper I got is the correct size for the 22mm rotor we use on regular AND large size rotors.

however, I still have to work out the bracket for it. I'll post some pics up on a new thread tomorrow. I was so excited I forgot to take pictures, LOL.

I also got some nice new 6-pot calipers for my tC

vten · 06-26-2009, 12:11 AM

ooohhh 6 pot ...I bet it cost a lot eh ?

contraband831 · 06-26-2009, 11:59 AM

very nice, I likes

Kaotic Lazagna · 06-26-2009, 10:21 PM

Your car must stop on a dime now. Did it come with ABS?

AlainMikli · 06-27-2009, 04:36 AM

do you change your brake pad too

?

Malaya1221 · 06-27-2009, 09:11 AM

will the rear disc conversion fit 15' wheel and r they the one from garm?

vten · 06-27-2009, 09:25 AM

I got everything from Garm, it's a great product and a stellar seller

.

still using the stock pads, since I'll be getting the wilwood caliper later on...

and I believe you can use 15" wheels, but im not sure.

seems like project yaris is not gonna be over just yet

Kaotic Lazagna · 06-27-2009, 07:43 PM

Nope, the rear disc conversion utilizes bigger rotors, right? If I remember correctly then, they must be used with 16 or 17's (most likely 17's).

Brian · 06-27-2009, 08:22 PM

The rear disc conversion has 285mm rotors

vten · 06-28-2009, 11:22 PM

took a picture off my camera phone today after work

eTiMaGo · 06-29-2009, 07:00 AM

looking good, makes those wheels look less empty

Now just get some red paint for the front calipers!

06-25-2009, 11:03 PM	#2
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	Looks good. Reminds me I need to paint my rear calipers. __________________ http://www.cardomain.com/ride/3875996

06-25-2009, 11:27 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	THAT LOOKS AWESOME. as long as the Brembo's are made for the correct width rotor (~22mm for Yaris, I think), you are ok. If not, you're setting up a dangerous combination. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-25-2009, 11:53 PM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	oh. I got the Wilwood calipers I'm going to use for the brake kit today, they look really nice. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-26-2009, 12:01 AM	#8
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Yes the 4-pot caliper I got is the correct size for the 22mm rotor we use on regular AND large size rotors. however, I still have to work out the bracket for it. I'll post some pics up on a new thread tomorrow. I was so excited I forgot to take pictures, LOL. I also got some nice new 6-pot calipers for my tC __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-26-2009, 11:59 AM	#10
contraband831 El Huevo Drives: 2007 Liftback Join Date: Aug 2006 Location: CEN*CAL Posts: 959	very nice, I likes __________________

06-25-2009, 11:47 PM	#5
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	it's not the real brembo caliper , Garm ....its the brembo caliper cover from thailand , but the material is fiberglass instead of a thin plastic that easily melts..

06-25-2009, 11:57 PM	#7
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	ooohhh shoot me a pics please ....dwitan@yahoo.com, it should work on my oversize rotor right ?

06-26-2009, 12:11 AM	#9
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	ooohhh 6 pot ...I bet it cost a lot eh ?

06-26-2009, 10:21 PM	#11
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Your car must stop on a dime now. Did it come with ABS?

06-27-2009, 04:36 AM	#12
AlainMikli Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009 Location: SF, CA Posts: 465	do you change your brake pad too? __________________ REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger…

06-27-2009, 09:11 AM	#13
Malaya1221 super duper M*******TOR Drives: 2007 jahPANIS egg(Sarao Phil) Join Date: Oct 2008 Location: Torrance, Ca Posts: 1,011	will the rear disc conversion fit 15' wheel and r they the one from garm?

06-27-2009, 09:25 AM	#14
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	I got everything from Garm, it's a great product and a stellar seller . still using the stock pads, since I'll be getting the wilwood caliper later on... and I believe you can use 15" wheels, but im not sure. seems like project yaris is not gonna be over just yet

06-27-2009, 07:43 PM	#15
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Nope, the rear disc conversion utilizes bigger rotors, right? If I remember correctly then, they must be used with 16 or 17's (most likely 17's).

06-27-2009, 08:22 PM	#16
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	The rear disc conversion has 285mm rotors __________________ http://www.cardomain.com/ride/3875996

06-29-2009, 07:00 AM	#18
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	looking good, makes those wheels look less empty Now just get some red paint for the front calipers! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (sorta) - RunStop Rear disc brake conversion	eTiMaGo	DIY / Maintenance / Service	17	07-02-2019 08:24 AM
Get your post counts here! read 1st post for rules	Astroman	Off-topic / Other Cars / Everything else Discussions	3414	11-04-2012 09:03 AM
First thoughts: Carbotech XP8 pads and slotted rotors	jkuchta	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	37	12-19-2008 10:21 AM