|
01-29-2009, 06:00 AM | #1 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Dyno and Videos
Went to Dyno my car today, wasn't expecting much. But was hoping for something. I have the 1.3L 2NZ-FE rated at 63kW (85hp), mine is a Manual. The stock 1.5L 1NZ-FE rated at 80kW (107hp) as everyone knows. Looking at the Dyno chart thread, i realised at the wheel hp is less so the 107hp is actually about 90hp as have been tested by a few members. Taking off roughly 15-17hp would make my stock approximatly 68hp. My results were 75hp, a gain of about 5-7hp if calculations are correct. Anyway here's the Dyno sheet and some videos for your viewing. Enjoy.
Sorry about the incar ones couldn't hold the camera and shift gears. Haha. Wish i could have got the Torque reading too, but the guy probably had no idea how to find the ignition lead he was looking for or something of that sort that he was talking about. Dyno Sheet Start Up In Car Driving - Some in 2nd and 3rd Gear 3rd Gear mostly cruising Abit of 2nd Gear near the end Dyno run - 4th Gear
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar Last edited by ruimond; 01-29-2009 at 06:19 AM. |
01-29-2009, 08:55 AM | #2 |
daily driver
|
hard to think that they couldnt spit you out a dyno sheet with tq on it....since a dyno measures torque and HP is a function of tq and rpms
would be nice to see a dyno of hp and tq vs rpm too.....vs km/h doesnt say much about the powerband... and a general idea of hp at the wheels is 13% less than crank hp for manuals and 25% less for autos....so 85*0.87 =~ 74whp might also be cool to see an SAE corrected hp number too but coudos for hitting the dyno! what mods do you have?
__________________
|
01-29-2009, 09:54 AM | #3 | |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Quote:
My mods list is below my signature. Thanks
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
|
01-29-2009, 11:04 AM | #4 | |
daily driver
|
Quote:
i dyno'd my old car at a couple different places and they were always able to pick and choose what they show on the graph....free of charge, too
__________________
|
|
01-29-2009, 07:35 PM | #5 | |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Quote:
But as you said you can get torque from the dyno itself, so im not sure whats going on. Maybe he didn't do a proper Dyno. This is my first time dyno'ing so im not sure of the procedures. My butt dyno tells me it feels faster then when it was stock though.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
|
01-29-2009, 07:46 PM | #6 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Do you have the chart that plots HP against RPM?
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
01-29-2009, 07:49 PM | #7 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
My dyno guy had difficulty getting a good signal off of the wires leading to the coil pack. I have an appointment to get mine dyno'd this Saturday.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
01-30-2009, 05:20 AM | #8 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
The chart above is all i have at the moment, so its not a very good dyno chart. Oh well at least i got a chance to video it on the dyno and let people see what it sounds like. Haha.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
01-30-2009, 06:54 AM | #9 |
Parallel Parking Pro
|
If I paid for this kind of dyno run service I would be asking for my money back. The guy seems to be rather incompetent in setting up the dyno to properly run your car.
__________________
Leong's NCP91 Toyota Yaris E Hankook V12 Evo 195/55/15 on Buddy Club P1 replicas 15x7 ET +38 Stebel horns, Philips Silvervision turn indicator bulbs TTE Lowering Springs, Camber bolts TRD Blue brake pads Fujitsubo Super Wagolis axleback exhaust DC Sports header |
01-30-2009, 08:07 AM | #10 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Yeh that's true cleong, abit of an effort required to do that though. I might just get another dyno run reading which is properly done. I do feel slightly cheated though, but i only realised later when i got home so i couldn't do much.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
01-30-2009, 09:01 AM | #11 |
daily driver
|
just see if he'll do another pull or 2 for free....
__________________
|
01-30-2009, 07:24 PM | #12 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
I found a place near my house, and they use the Dyno Dynamics Dyno. Rather then the Dyno Jet. They seemed to know alot more about it, the printout will have HP/Torque and Air/Fuel Ratios etc. I will post it when i get the printout of this proper reading
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
01-30-2009, 07:27 PM | #13 | |
Start another Oil Thread!
|
next time, have the technician clamp the sensor around ALL of the wires for coilpack #1.. you'll get an RPM reading and your torque numbers
__________________
Quote:
|
|
01-30-2009, 07:29 PM | #14 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Good man. You're willing to pay for two dyno days. I'll be doing my second tomorrow.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
01-30-2009, 07:37 PM | #15 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Haha, i'd rather have the proper information then not much info at all. Then at least everyone and myself can see a proper dyno printout.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
01-31-2009, 02:17 AM | #16 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Ok i got a new Dyno Sheet and a new Video.
The people at Pro Auto were really nice and helpful. They use a different Dyno machine from my 1st Dyno. This time they knew what they were doing and connected the sensors to my engine bay, exhaust exit and so forth. The lady at the front desk was asking me if they made superchargers or turbo kits for the Yaris. Haha was queit funny, i told her their avaliable in the US,etc . Here's the results: (Was pretty hot and humid today like 35-38degrees or something). I did get lower HP results though, it seems abit on the low end. Even after all the mods i have done such as the intake, cat-back exhaust and underdrive pulley. I don't really have a Dyno Chart of a stock 1.3L 2NZ-FE that someone else has, so i can't compare it. Hrmm oh well, at least it sounds pretty good. Haha.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar Last edited by ruimond; 01-31-2009 at 04:24 AM. |
01-31-2009, 08:47 PM | #17 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
If anyone has a dyno of a stock 2nz-fe can you post it or PM me it. Thanks.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
01-31-2009, 08:50 PM | #18 | |
Start another Oil Thread!
|
looks like they still didn't get your RPM on there, which means they didn't connect up the tach sensor :(
but at least you got a torque number!
__________________
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WR Secret Weapon Intake Dyno Tested.. | WRLEO | Performance Modifications | 70 | 05-17-2007 03:00 PM |