Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 11-16-2016, 09:21 AM   #217
JessMess
 
Drives: 08 Yaris hatch back
Join Date: Nov 2016
Location: Waldorf Maryland
Posts: 12
More pics of my home made muffler delete
JessMess is offline   Reply With Quote
Old 11-25-2016, 03:41 PM   #218
JessMess
 
Drives: 08 Yaris hatch back
Join Date: Nov 2016
Location: Waldorf Maryland
Posts: 12
Made my own muffler delete.. I wanted to keep as much stock material as possible. This is what i came up with..


Last edited by JessMess; 02-04-2017 at 02:17 PM.
JessMess is offline   Reply With Quote
Old 11-25-2016, 03:42 PM   #219
JessMess
 
Drives: 08 Yaris hatch back
Join Date: Nov 2016
Location: Waldorf Maryland
Posts: 12

Here it is with exhaust tip
JessMess is offline   Reply With Quote
Old 01-16-2017, 07:40 PM   #220
paulelhardcore
 
Drives: yaris sedan
Join Date: Feb 2010
Location: knoxville
Posts: 26
Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.
paulelhardcore is offline   Reply With Quote
Old 02-08-2017, 07:54 PM   #221
jackkb1998
I've made a post!
 
Drives: 2015 Toyota Yaris 5 Speed 1.5L
Join Date: Feb 2017
Location: Ohio
Posts: 1
Help with exhaust on a 2015 Toyota Yaris Hatchback

Hi,

I have just done a muffler delete and don't plan on keeping it like this. Are there any pieces I can buy that will be a nice fit or is this something I have to build myself? I can weld pieces from the old muffler to a new exhaust, but am unsure if anyone has had any experience with this.
jackkb1998 is offline   Reply With Quote
Old 02-09-2017, 10:19 AM   #222
thebarber
daily driver
 
thebarber's Avatar
 
Drives: the #wrecho
Join Date: Jun 2006
Location: Grand Rapids, MI
Posts: 5,877
Quote:
Originally Posted by paulelhardcore View Post
Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.
cat and resonator are 2" thru. just have someone fabricate your exhuast at 2" mandrel or 2.25" crush bent from the back end of the resonator to the back of the car.

thats what i did way back when (2.25" crush bent res-axle section with megan axleback muffler) and it was great. really picked up the middle and top end power
__________________
thebarber is offline   Reply With Quote
Old 06-23-2017, 01:11 AM   #223
ep123is
 
ep123is's Avatar
 
Drives: 2007 Yaris
Join Date: May 2017
Location: Mission TX
Posts: 4
My GReddy Exhaust Tip

GReddy Revolution RS universal tip installed pretty much just the tip
Here's a demo
Link: https://youtu.be/hoIkA9m2QMY
Attached Images
File Type: jpg Awesome2.jpg (141.7 KB, 316 views)
File Type: jpg awsometwo.jpg (198.0 KB, 315 views)
ep123is is offline   Reply With Quote
Old 06-23-2017, 10:17 AM   #224
ern-diz
 
ern-diz's Avatar
 
Drives: 2007 Liftback
Join Date: Sep 2007
Location: CA all day
Posts: 3,794
Looks really good, but isn't the muffler there too? Looks like more than just the tip.
__________________
On Instagram

On Wheelwell
ern-diz is offline   Reply With Quote
Old 06-23-2017, 10:56 AM   #225
kimona
Super Moderator
 
kimona's Avatar
 
Drives: 2014 White VITZ
Join Date: May 2007
Location: Huntington Bch, CA
Posts: 4,938
Quote:
Originally Posted by ern-diz View Post
Looks really good, but isn't the muffler there too? Looks like more than just the tip.
Yup, looks like the complete super shiny muffler installed there... and the GReddy licence plate frame, too!
Attached Images
File Type: jpg Greddy.jpg (15.4 KB, 314 views)
kimona is offline   Reply With Quote
Old 06-25-2017, 08:49 AM   #226
ep123is
 
ep123is's Avatar
 
Drives: 2007 Yaris
Join Date: May 2017
Location: Mission TX
Posts: 4
Thank you sorry for the late reply I dont have notifications and im pretty much new here thats why and yeah well when I bought the car it came a exhuast but sounded like crap lol and it was too long so i bought the GReddy took it to someone so they can weld it, it sounded so much better and it sounds aggressive from the inside, so i guess maybe its more than just the tip lol
ep123is is offline   Reply With Quote
Old 11-21-2018, 06:27 AM   #227
06YarisRS
 
Drives: 06 2ZR Turbo Yaris RS
Join Date: Aug 2017
Location: Fredericton, New Brunswick, Canada
Posts: 2,384
Here is my Megan axleback installed. The car has to go to an exhaust shop to get everything lined up - muffler needs to be rolled a few degrees clockwise . I also ordered 4 new Walker 35286 insulators/hangers as my old ones were pretty soft and stretched. The axleback is attached to an aftermarket Scion xD midpipe. Considering having the shop run 2.25" pipe from the resonator to the axleback.

Here is a video. Skip to 0:56 if you just want to hear the exhaust.

https://www.youtube.com/watch?v=5Edvs_TSGkY

Pic:

__________________


2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer
https://www.instagram.com/2zr_turbo_yarisrs/
06YarisRS is offline   Reply With Quote
Old 02-17-2019, 10:48 AM   #228
Matt Johnson
 
Drives: 2005 Echo RS
Join Date: Oct 2018
Location: Hamilton, ON. Canada
Posts: 16
Got my side exit welded up for my 2005 RS hatch the other day. 2" 409 stainless with a Magnaflow 10414 muffler and 3.2" x 2.5" oval tip. Just need to fab up the hangers for it now.

Sent from my SM-A520W using Tapatalk
Matt Johnson is offline   Reply With Quote
Old 02-17-2019, 10:50 AM   #229
Matt Johnson
 
Drives: 2005 Echo RS
Join Date: Oct 2018
Location: Hamilton, ON. Canada
Posts: 16
First start up before I shortened the system to tuck the tip under the car...

https://youtu.be/2p7t_Xj6qAo

Sent from my SM-A520W using Tapatalk
Matt Johnson is offline   Reply With Quote
Old 10-14-2022, 07:47 AM   #230
KelisDe
 
Drives: Yaris
Join Date: Oct 2022
Location: NY
Posts: 5
very nice!
KelisDe is offline   Reply With Quote
Old 11-24-2022, 04:36 AM   #231
Compeer
 
Drives: NCP90 TRD Yaris Manual
Join Date: Oct 2022
Location: Auckland, NZ
Posts: 260
Here my Tanabe medallion g fordan Axle back vid I made right after the install
https://drive.google.com/file/d/1TAt...usp=share_link
Compeer is offline   Reply With Quote
Old 12-29-2023, 09:55 AM   #232
Compeer
 
Drives: NCP90 TRD Yaris Manual
Join Date: Oct 2022
Location: Auckland, NZ
Posts: 260
I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.


https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.

Last edited by Compeer; 12-29-2023 at 10:06 AM.
Compeer is offline   Reply With Quote
Old 12-29-2023, 11:34 PM   #233
mitch9521
Gen 3 > Gen 2
 
mitch9521's Avatar
 
Drives: NCP131, F-150
Join Date: Jul 2019
Location: Red Deer, AB
Posts: 494
Quote:
Originally Posted by Compeer View Post
I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.


https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.
Modellista Sold a center exhaust and rear bumper lip for the 3rd gen Vitz RS, fairly easy to find.

__________________
2014 NCP131 5 Speed
2007 F150 4.2L 5 Speed
2013 Rav4 LE AWD Autotragic - Wife's

mitch9521 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Installing Greddy TI-C Exhaust System redyaris DIY / Maintenance / Service 13 08-01-2009 04:05 AM
GReddy prototype = Free Exhaust! Chris_Lum California 30 02-27-2007 10:13 PM
Why is DTM exhaust thread closed? gr8yaris Performance Modifications 4 01-13-2007 11:01 AM
Fujitsubo Exhaust!! MC-BPT Sponsors Classifieds Area 17 11-16-2006 10:36 AM
Toyota Performance Exhaust for Yaris HB bigsky2 Performance Modifications 16 06-02-2006 10:21 AM


All times are GMT -4. The time now is 12:22 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.