|
12-31-2012, 10:41 AM | #1 |
Drives: 53 Plate Yaris Join Date: May 2010
Location: Coventry
Posts: 7
|
Help with 2003 Yaris Steering Wheel control adaptor / stalk
Hello experts,
When i had my Pioneer head unit fitted, the guy said it isnt possible to get a steering wheel adaptor for my car. Only recently i seen many on eBay. But i don't know if it will fit. http://www.ebay.co.uk/itm/TOYOTA-Cor...item3a712ec90e The item is above or something similar. Could someone please help. Thanks in advance, Sam |
12-31-2012, 11:57 AM | #2 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
The Toyota steering wheel controls are very simple, so you should definitely be able to find an adapter. With one like the one in your ebay link, verify with the vendor that it is compatible with your particular Pioneer head unit.
__________________
|
12-31-2012, 03:37 PM | #3 |
Drives: 53 Plate Yaris Join Date: May 2010
Location: Coventry
Posts: 7
|
The guy seems to think that the adaptor does not normally fit without modifications ... he said he will need to see the original car connectors at the top of the display part not the underneath where the radio is.
Confused lol. I mean i thought it's as simple as connect the adaptor to the head unit and then the other side and it's working. Model No of my head unit is: Pioneer DEH-2300UB Thanks. |
01-01-2013, 09:37 AM | #4 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
I think that the only modification that would be necessary would be to splice the two wires for the steering wheel controls to the blue and black wires on the 2 pin connector.
__________________
|
|
01-01-2013, 05:37 PM | #5 |
Drives: 53 Plate Yaris Join Date: May 2010
Location: Coventry
Posts: 7
|
Ooh okay i see.
Thanks for your help. |
07-23-2018, 06:11 AM | #6 |
I've made a post!
Drives: Yaris 2003 facelift Join Date: Jul 2018
Location: Cagliari
Posts: 1
|
I know the thread is very old, but for anyone facing the same problem, which is adapting a Connect2 steering wheel controls interface on a Yaris 2003>2006 (facelift), here is the solution:
The Connect 2 interface has a 20 pin connector with three wires for the steering wheel controls: pink (sw1), blu (sw2), black (swg). The car connector on the original cd player has a different connector with only two wires: yellow and green/yellow. Disregard this connector. Open the dash just above the cd player, behind the display there is a 8 pin connector with three wires attached: black, red, green. Black here is not ground as you may think! These are the correct connections to the interface: black > pink, red > blu, green > black. Of course you have to cut the connectors and make the connections yourself. I used some faston connectors. It took me some time to figure out this, so I thought it would be nice to share it (maybe there is stil anyone in the world with an old Yaris trying to replace the original stereo) |
Tags |
stalk, steering wheel adaptor |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY Cruise Control for 2012 Yaris - Good News! | CTScott | Third Gen Yaris General Discussion | 304 | 10-10-2023 05:23 AM |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
How much would you pay for a warranty supported steering wheel extension? (3d try) | wornways | General Yaris / Vitz Discussion | 36 | 09-16-2009 10:16 AM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |