|
|
07-15-2016, 04:01 PM | #1 |
I've made a post!
Drives: 2013 Yaris 1.3 Join Date: Jul 2016
Location: Falkirk
Posts: 1
|
Clutch slave cylinder location question
Hi
Im planning to bleed the clutch slave cylinder. It's for two reasons, just as routine maintenance and also as the clutch is quite hard at the moment and i'd like to try this to see if it can make any difference. Its the 1NR-FE engine I have, I can see a bleed valve at a junction where the hydraulic line splits, with one line going towards the left front wheel brake and the other line dissapears into the engine compartment. (The car is the right hand drive version if that makes any difference) But I cant seem to locate the slave cylinder and it's bleed valve. Has anyone got a photo or diagram that shows where to find it? Thanks |
07-16-2016, 06:47 AM | #2 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Follow the line to it from the master cylinder.
Should be right behind the radiator on the front of transmission. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
yaris timing belt | phenoyz | General Yaris / Vitz Discussion | 16 | 02-24-2015 01:05 AM |
'07 Yaris Clutch replacement | dinop | DIY / Maintenance / Service | 12 | 04-22-2013 04:47 AM |
Clutch question. | Black_griffin6 | Performance Modifications | 6 | 04-04-2013 04:30 PM |
Selling my Yaris - Clutch Replacement Question | Swoleslaw | DIY / Maintenance / Service | 9 | 11-05-2011 11:27 AM |
Question: Screws location of Rear Light | joeblack | DIY / Maintenance / Service | 2 | 12-21-2009 09:28 PM |