Just got my COMPUSTAR - Toyota Yaris Forums

gwasabi · 07-13-2007, 07:17 AM

Just got my compustar alarm.

Any tips and hints I should know before I install?

Capagotks · 07-13-2007, 09:42 AM

the most important thing is that the wiring is ALL BLACK. sure it makes it a pain in the ass to install, but can also deter/prevent a thief from stealing your car.

Make sure the control box is hidden well, and if its under the dash, put it up high.

Have a siren pointing down towards the ground under the dash (if thats where you put it) so it makes it difficult for the thief to go near the control box without hurting their hearing (but that can also help them find it, so put one under the seat)

last, wrap all the wires in electrical tape or some plastic tubing (or similar) to slow them down. it might also confuse them into thinking that it is stock wiring.

nqd · 07-13-2007, 09:44 AM

is it hard wiring up an alarm system?

Capagotks · 07-13-2007, 09:53 AM

not if you have instructions.

usually (depending on what alarm you have) you need to wire the hood, tailgate, doors, door locks, the ignition, hazard lights, horn, shock/microwave motion sensor, etc. its not worth the hassle doing it yourself. if you get someone else to do it (pro) you'll probably get a warranty.

note for the black wiring: you can put little sticky tabs on the wires telling you what they are, just be sure, just make sure you take them off when your done ;)

gwasabi · 07-14-2007, 04:30 AM

somethings wrong with my compustar. The Unlock works but the Lock doesn't work. Is it some kind of wiring issue?

Capagotks · 07-14-2007, 05:06 AM

i dont think so. if it was a wiring issue, it wouldn't unlock either. get it check it out or email the company

gwasabi · 07-14-2007, 06:00 AM

it unlocks but it wont lock. when I have the unlock wire in the lock harness it locks. I think it might be a defective item

07-13-2007, 07:17 AM	#1
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	Just got my COMPUSTAR Just got my compustar alarm. Any tips and hints I should know before I install?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alarm/Security Recommendations??	static808	In Car Entertainment + Electronics (audio / video / alarm)	7	09-12-2006 08:55 AM

07-13-2007, 09:42 AM	#2
Capagotks Chode View User's Garage Drives: Silver 5 Door YRX 1.5L I4 Join Date: Feb 2007 Location: Sydney AUSTRALIA Posts: 51	the most important thing is that the wiring is ALL BLACK. sure it makes it a pain in the ass to install, but can also deter/prevent a thief from stealing your car. Make sure the control box is hidden well, and if its under the dash, put it up high. Have a siren pointing down towards the ground under the dash (if thats where you put it) so it makes it difficult for the thief to go near the control box without hurting their hearing (but that can also help them find it, so put one under the seat) last, wrap all the wires in electrical tape or some plastic tubing (or similar) to slow them down. it might also confuse them into thinking that it is stock wiring.

07-13-2007, 09:44 AM	#3
nqd Drives: 07 Yaris LB Absolute RED Join Date: Apr 2007 Location: Boston, MA Posts: 884	is it hard wiring up an alarm system?

07-13-2007, 09:53 AM	#4
Capagotks Chode View User's Garage Drives: Silver 5 Door YRX 1.5L I4 Join Date: Feb 2007 Location: Sydney AUSTRALIA Posts: 51	not if you have instructions. usually (depending on what alarm you have) you need to wire the hood, tailgate, doors, door locks, the ignition, hazard lights, horn, shock/microwave motion sensor, etc. its not worth the hassle doing it yourself. if you get someone else to do it (pro) you'll probably get a warranty. note for the black wiring: you can put little sticky tabs on the wires telling you what they are, just be sure, just make sure you take them off when your done ;)

07-14-2007, 04:30 AM	#5
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	somethings wrong with my compustar. The Unlock works but the Lock doesn't work. Is it some kind of wiring issue?

07-14-2007, 05:06 AM	#6
Capagotks Chode View User's Garage Drives: Silver 5 Door YRX 1.5L I4 Join Date: Feb 2007 Location: Sydney AUSTRALIA Posts: 51	i dont think so. if it was a wiring issue, it wouldn't unlock either. get it check it out or email the company

07-14-2007, 06:00 AM	#7
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	it unlocks but it wont lock. when I have the unlock wire in the lock harness it locks. I think it might be a defective item