megan exhaust crooked? - Toyota Yaris Forums

thebarber · 04-07-2009, 08:47 PM

anyone elses megan axleback sit crooked under their car? looks kinda ghetto on mine...

dallas · 04-07-2009, 09:29 PM

Mine moves around and goes off alignment sometimes too!

Kaotic Lazagna · 04-09-2009, 05:10 PM

Possibly for clearance issues? My GTI was like that too (Flowmaster muffler tho).

Sabretooth · 04-10-2009, 08:32 AM

Mine is a bit shakey...has a tendency to move around a bit at idle.

thebarber · 04-10-2009, 01:38 PM

not shaky, just sits crooked

Kaotic Lazagna · 04-10-2009, 04:39 PM

See, they had to install the Flowmaster a bit crooked to clear the heat shields.

And OT, the shop told me they were going to do mandrel bends, and I never bothered to look into it, but looking back, it looks like crush bends to me??????????

thebarber · 04-10-2009, 07:34 PM

theres lots of room under the yaris...

AlexNet0 · 04-10-2009, 10:42 PM

looks fine to me

at3GG · 04-21-2009, 07:29 PM

yeah mine was a liittttle bit crooked....a little more so now because i bracketed it over to the left because it hit my springs on some turns.....aka annoying

thebarber · 04-21-2009, 07:30 PM

i painted my megan muffler flat black last weekend...left the tip alone...looks 100x better

at3GG · 04-22-2009, 12:38 PM

hmmm nice idea, pics?

thebarber · 04-24-2009, 10:51 PM

Quote:

Originally Posted by at3GG

hmmm nice idea, pics?

spookz · 04-24-2009, 11:02 PM

Looks great! I'm thinking of doing the same when I get mine one day.

thebarber · 04-24-2009, 11:20 PM

Quote:

Originally Posted by spookz

Looks great! I'm thinking of doing the same when I get mine one day.

thanks...its 100x nicer looking

and, because the megan sounds stock-ish when driving around normally, you cant really see i even have an exhaust if youre right behind me (as the megan doesnt have a rolled or double walled exhaust tip)

spookz · 04-25-2009, 12:48 AM

Do you think exhaust shops are able to modify the exhaust hangers so that it sits level?
Or is the actual axle-back piping welded on crooked to the muffler?

cleong · 04-25-2009, 01:18 AM

You really only need to buy rubber exhaust hangers of varying lengths to get the pipe to sit at your desired angle.

thebarber · 04-25-2009, 08:21 AM

could bend the hangers...but im lazy, flat black paint was easier

at3GG · 04-25-2009, 12:33 PM

i like it very stealth, nice job

04-07-2009, 08:47 PM	#1
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	megan exhaust crooked? anyone elses megan axleback sit crooked under their car? looks kinda ghetto on mine... __________________

04-10-2009, 08:32 AM	#4
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Mine is a bit shakey...has a tendency to move around a bit at idle. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-10-2009, 01:38 PM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	not shaky, just sits crooked __________________

04-10-2009, 07:34 PM	#7
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	theres lots of room under the yaris... __________________

04-10-2009, 10:42 PM	#8
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	looks fine to me __________________ ---------- MI-YW ----------

04-07-2009, 09:29 PM	#2
dallas Drives: Yaris Hatch /Landrover D2 Join Date: Jun 2007 Location: Canada Posts: 242	Mine moves around and goes off alignment sometimes too!

04-09-2009, 05:10 PM	#3
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Possibly for clearance issues? My GTI was like that too (Flowmaster muffler tho).

04-10-2009, 04:39 PM	#6
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	See, they had to install the Flowmaster a bit crooked to clear the heat shields. And OT, the shop told me they were going to do mandrel bends, and I never bothered to look into it, but looking back, it looks like crush bends to me??????????

04-21-2009, 07:29 PM	#9
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	yeah mine was a liittttle bit crooked....a little more so now because i bracketed it over to the left because it hit my springs on some turns.....aka annoying __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

04-21-2009, 07:30 PM	#10
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	i painted my megan muffler flat black last weekend...left the tip alone...looks 100x better __________________

04-22-2009, 12:38 PM	#11
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	hmmm nice idea, pics? __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

04-24-2009, 11:02 PM	#13
spookz JDM yO! View User's Garage Drives: '09 3dr. 5-spd Join Date: Oct 2008 Location: Sydney, Australia Posts: 331	Looks great! I'm thinking of doing the same when I get mine one day. __________________ .

04-25-2009, 12:48 AM	#15
spookz JDM yO! View User's Garage Drives: '09 3dr. 5-spd Join Date: Oct 2008 Location: Sydney, Australia Posts: 331	Do you think exhaust shops are able to modify the exhaust hangers so that it sits level? Or is the actual axle-back piping welded on crooked to the muffler? __________________ .

04-25-2009, 01:18 AM	#16
cleong Parallel Parking Pro View User's Garage Drives: Yaris 1.5 Manual Join Date: Dec 2006 Location: Singapore Posts: 590	You really only need to buy rubber exhaust hangers of varying lengths to get the pipe to sit at your desired angle. __________________ Leong's NCP91 Toyota Yaris E Hankook V12 Evo 195/55/15 on Buddy Club P1 replicas 15x7 ET +38 Stebel horns, Philips Silvervision turn indicator bulbs TTE Lowering Springs, Camber bolts TRD Blue brake pads Fujitsubo Super Wagolis axleback exhaust DC Sports header

04-25-2009, 08:21 AM	#17
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	could bend the hangers...but im lazy, flat black paint was easier __________________

04-25-2009, 12:33 PM	#18
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	i like it very stealth, nice job __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Megan Racing Axle Back Exhaust for Sedan?	Arkhangel	Performance Modifications	9	03-31-2009 12:05 PM
FS on Ebay (not mine): megan exhaust	thebarber	Items for Sale by private party	2	02-06-2009 08:37 AM
Megan Racing coilovers & exhaust	alfmoonspace	Items for Sale by private party	8	12-16-2008 02:55 AM
WeSellCarParts.com // Megan Racing Liftback Axle-Back Exhaust	WeSellCarParts	WeSellCarParts	101	09-28-2007 12:26 PM
GReddy prototype = Free Exhaust!	Chris_Lum	California	30	02-27-2007 10:13 PM