Door Stopper - Toyota Yaris Forums

Riteshb · 07-06-2021, 02:08 PM

Hi Guys

I was removing my driver side door from my Yaris 5 door hatch and I ended up breaking the door stopper bolt. So I tried drilling the nut out and ended up drilling a 3 mm hole through the bolt. can some advise what I can do to fix the broken stud? is there any wires that can get damage if I weld the bolt to the frame?

Will link to an image to show you the damage I have caused.

https://ibb.co/1nKMQ4J

07-06-2021, 02:08 PM	#1
Riteshb Drives: yairs 2010 Join Date: Jan 2018 Location: durban Posts: 7	Door Stopper Hi Guys I was removing my driver side door from my Yaris 5 door hatch and I ended up breaking the door stopper bolt. So I tried drilling the nut out and ended up drilling a 3 mm hole through the bolt. can some advise what I can do to fix the broken stud? is there any wires that can get damage if I weld the bolt to the frame? Will link to an image to show you the damage I have caused. https://ibb.co/1nKMQ4J

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode