rpf1s 15x7 35+ - Toyota Yaris Forums

menso002 · 11-27-2021, 07:43 PM

Hey guys i just got some rpf1s in the size mentioned above, i wanted to know how these can be fitted on and what modifications will need to be done, everything is stock in the car and im guessing i will need to remove fender liners and roll the fenders.

Does anybody know if spacers will be necessary as well? Ive seen other posts of other people fitting 15x7 35+ with seemingly no problem but ive also seen some that do have problems as well, id assume that would be because of wheel design but i wouldnt really know, im just a noob and dont know much about cars. Any help is appreciated, thx. Also forgot to mention my tire setup is 195/50/15

CrankyOldMan · 11-28-2021, 10:35 AM

Put them on, see if they rub? You're not on lowering springs so wheel arch clearance shouldn't be a serious issue.

You can also look at online tire size comparison tools to check for suspension and fender clearance. The old one at rimsntires.com seems to be gone but there are others to be found.

Jason@SportsCar · 11-28-2021, 04:59 PM

Should be fine with that size tire.

I use the same wheel with a 1/4" spacer, and a 215-580-15 tire with a fender roll and camber.

lani100 · 11-29-2021, 01:01 PM

They fit right on, no need to do anything except fitting spigot rings.

remcafee · 11-30-2021, 10:09 PM

they should fit with room to dpare for lowering springs, i have 16x7 35 offset enkeis and lowered on tein springs and still no rubbing

menso002 · 01-03-2022, 10:06 PM

yeah it really wasnt a issue, they fit right on. i was worried because sites like ebay and amazon said they did not fit and there wasnt much i could find to really prove that or not.

menso002 · 01-04-2022, 05:09 AM

thank you guys for the help, i wished i would of known the 16x7 fits before i bought these i would of totally gone for it! i was also hoping they would of changed the feel of the car more than they did. :/ This is my first time buying wheels so i didnt really know what to expect goung from the stock steelies to these. it only cutting around 6-7 pounds but i still thought it would of been more of a change in ride quality, i guess its just my inexperience . Still thanks for all the advice, i aprreciate it. cheers

sh0rtlife · 01-21-2022, 08:57 PM

ride quality is more noteable in tire sidewall and tire construction, i run 15inch steelies for winter and 14s for summer the 15s are TALL and rub slightly on full lock...no real ride change, i suspect once you get to 16+ is where the real change is at

11-27-2021, 07:43 PM	#1
menso002 Drives: 2012 Yaris Join Date: Nov 2021 Location: my basement Posts: 3	rpf1s 15x7 35+ Hey guys i just got some rpf1s in the size mentioned above, i wanted to know how these can be fitted on and what modifications will need to be done, everything is stock in the car and im guessing i will need to remove fender liners and roll the fenders. Does anybody know if spacers will be necessary as well? Ive seen other posts of other people fitting 15x7 35+ with seemingly no problem but ive also seen some that do have problems as well, id assume that would be because of wheel design but i wouldnt really know, im just a noob and dont know much about cars. Any help is appreciated, thx. Also forgot to mention my tire setup is 195/50/15 Last edited by menso002; 11-27-2021 at 08:04 PM. Reason: i dont know

11-28-2021, 04:59 PM	#3
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	Should be fine with that size tire. I use the same wheel with a 1/4" spacer, and a 215-580-15 tire with a fender roll and camber. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

11-29-2021, 01:01 PM	#4
lani100 Drives: Yaris T sport TRD turbo Join Date: Aug 2017 Location: Netherlands Posts: 105	They fit right on, no need to do anything except fitting spigot rings. __________________ 2004 Yaris T-Sport 1NZ-FE with TRD Turbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: SoCal 15x7 +41 RPF1s w/ Tires	Dabuu	Items for Sale by private party	5	01-30-2017 10:01 PM
FS. 15x7 RPF1's 35 Offset	andres3165	Items for Sale by private party	5	08-10-2014 10:22 AM
Enkei Racing RPF1's 15x7	2manywheels	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	34	02-22-2012 05:34 PM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 06:42 PM
Installed 10mm PG spacers on a 15x7 +25 wheel	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	12	08-27-2009 07:10 PM

11-28-2021, 10:35 AM	#2
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Put them on, see if they rub? You're not on lowering springs so wheel arch clearance shouldn't be a serious issue. You can also look at online tire size comparison tools to check for suspension and fender clearance. The old one at rimsntires.com seems to be gone but there are others to be found.

11-30-2021, 10:09 PM	#5
remcafee Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018 Location: Arizona Posts: 403	they should fit with room to dpare for lowering springs, i have 16x7 35 offset enkeis and lowered on tein springs and still no rubbing

01-03-2022, 10:06 PM	#6
menso002 Drives: 2012 Yaris Join Date: Nov 2021 Location: my basement Posts: 3	yeah it really wasnt a issue, they fit right on. i was worried because sites like ebay and amazon said they did not fit and there wasnt much i could find to really prove that or not.

01-04-2022, 05:09 AM	#7
menso002 Drives: 2012 Yaris Join Date: Nov 2021 Location: my basement Posts: 3	thank you guys for the help, i wished i would of known the 16x7 fits before i bought these i would of totally gone for it! i was also hoping they would of changed the feel of the car more than they did. :/ This is my first time buying wheels so i didnt really know what to expect goung from the stock steelies to these. it only cutting around 6-7 pounds but i still thought it would of been more of a change in ride quality, i guess its just my inexperience . Still thanks for all the advice, i aprreciate it. cheers

01-21-2022, 08:57 PM	#8
sh0rtlife Drives: 2007 5dr canadian import Join Date: Dec 2016 Location: pacific north WET Posts: 1,025	ride quality is more noteable in tire sidewall and tire construction, i run 15inch steelies for winter and 14s for summer the 15s are TALL and rub slightly on full lock...no real ride change, i suspect once you get to 16+ is where the real change is at