Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Cosmetic Modifications (Exterior/Interior)
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 01-03-2021, 03:07 AM   #1
JB91
I've made a post!
 
Drives: 2015 Yaris NCPR130
Join Date: Jan 2021
Location: South Australia
Posts: 1
Blackening the badges

Hi all,

I would like to remove the badges so I can spray them black. How easy is it to remove them and then put them back?

I'd rather remove them so I don't get spray where it shouldn't be.
JB91 is offline   Reply With Quote
Old 01-04-2021, 04:53 AM   #2
goldbug
 
goldbug's Avatar
 
Drives: yaris hatchback
Join Date: Jun 2020
Location: Michigan
Posts: 5
JB91:
I used an expired plastic membership card. The thickness of the membership card was smaller than the thickness of a credit card. With that plastic membership card, I slid it behind the emblem and it cut through the sticky tape like cutting butter. Dental floss doesn’t do it in MO. After the emblem was removed, it was just a matter of cleaning up the residual glue. I’ll be doing the second emblem badge next weekend. Good luck with your project!
goldbug is offline   Reply With Quote
Old 01-05-2021, 01:35 AM   #3
mitch9521
Manual elitist
 
mitch9521's Avatar
 
Drives: 2014 LE, 2007 F150
Join Date: Jul 2019
Location: Brantford, Ontario
Posts: 126
Get a hair dryer or heat gun and warm it up before you try and pry it off, it'll make it easier.

The front emblem is held on with tabs, I managed to just yank mine off when I swapped it out for the Netz badge.
__________________
2014 Yaris LE 5 Speed - Netz emblem, fog lights, TRD sway bar, Blitz ram air, JDM tails, TRD short shifter, 15-17 radio, SE/RS spoiler, weeb stickers, projector retrofit, SE cluster, NST crank pulley, MR lowering springs - Daily driver

2007 F150 STX 4.2L 5 Speed - towing mirrors, Back Rack, weeb stickers, chrome bumpers, Lariat grille, Mark LT headlights - Pampered workhorse - hibernating

mitch9521 is offline   Reply With Quote
Old 01-12-2021, 06:14 AM   #4
06YarisRS
 
Drives: 06 2ZR Turbo Yaris RS
Join Date: Aug 2017
Location: Beaver Harbour, New Brunswick, Canada
Posts: 2,347
Putting them back on involves cutting many small pieces of 3M or other high quality 2-sided tape. Definitely not difficult, just finicky. There are some pics to give you an idea in this thread:

https://www.yarisworld.com/forums/sh...light=liftgate

I think there are some liquid types of adhesive that might be easier and less time consuming, but I'd want to be sure that they did damage the paint, or make them too hard to remove later if you had to remove them.
__________________


2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer
https://www.instagram.com/2zr_turbo_yarisrs/
06YarisRS is offline   Reply With Quote
Old 01-18-2021, 01:35 AM   #5
goldbug
 
goldbug's Avatar
 
Drives: yaris hatchback
Join Date: Jun 2020
Location: Michigan
Posts: 5
I used 3M tape on some badges. I also used the Clear Silicone Rubber seal that’s normally used for House Doors and Windows on other badges. The house silicone rubber seal worked great on the badges! Make sure you clean up the excess silicone. Here’s is a pic of a tube of clear silicone.
Attached Images
File Type: jpg B05E7377-F3BC-4204-8CDD-4F868C20D77D.jpg (205.7 KB, 46 views)
goldbug is offline   Reply With Quote
Old 02-23-2021, 11:16 AM   #6
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 183
PLASTIDIP

Is the rear badge tacked in with tabs also or is it just taped on? I thought about "plastidipping" my rear badge and emblems, but now I'd like to see how yours would turn out first. For the front badge, you'd have to remove the bumper to safely remove it. it's not all that hard to remove the bumper.
Neinris is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vitz badges Thebigwicks Willing to Buy by private party 1 08-08-2015 02:10 PM
Hybrid Badges Nips Cosmetic Modifications (Exterior/Interior) 21 02-10-2012 08:38 AM
Netz/Vitz Badges from Thailand (Pics) Kiteless Cosmetic Modifications (Exterior/Interior) 12 07-07-2011 09:11 PM
[Recovered] Group Buy for Australia #1 (Badges) harveyjai Australia 9 12-13-2008 03:59 PM
Where can I buy badges? ||)) (o) ||\|| Cosmetic Modifications (Exterior/Interior) 2 09-25-2007 12:59 PM


All times are GMT -4. The time now is 09:34 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.