Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 01-16-2011, 07:18 AM   #1
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
HOw to do Push Start D.I.Y

Hello Gentlemen sorry to bother u but i had a few questions to ask i want to install a push button on my yaris and i have a pivot push start button its relay box has four wires

1 x wire (black) for earth to attch to car body
1 X wire (red) also called terminal 15
2 x wires (blue) one called terminal 15 ign (ignition) & other terminal 50

Now i am typing the exact words on the manual

1.The green wire should be connected to terminal 15ign (ignition) behind the ignition switch,with another wire connecting Terminal 50 behind the iginition switch as well.(The power path from ign to starting motor)
2. The red wire should be connected to Terminal 15.(The power path that passes through ign)


PLz help
this is the pic i took from Memember Yarismo i hope he dont mind
marschall is offline   Reply With Quote
Old 01-16-2011, 08:27 AM   #2
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
The terminal 15 and 50 don't mean anything to me, but for a push-start switch to start the car, it simple needs to have the ignition in the on position and then jump the pink and black wires.

From the directions I think they are saying that the red and one blue goes to the pink and the other blue goes to the black.
__________________
CTScott is offline   Reply With Quote
Old 01-16-2011, 12:20 PM   #3
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
So wht ur saying is that the 1 blue and 1 red has to be connected 2 the pink wire?
marschall is offline   Reply With Quote
Old 01-16-2011, 12:27 PM   #4
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by marschall View Post
So wht ur saying is that the 1 blue and 1 red has to be connected 2 the pink wire?
I believe so, based on the instructions you posted.
__________________
CTScott is offline   Reply With Quote
Old 01-17-2011, 11:28 AM   #5
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
Its aliiiiiiiiveeee!!!! thanku CT Scott
marschall is offline   Reply With Quote
Old 01-17-2011, 12:19 PM   #6
big lo
 
big lo's Avatar
 
Drives: 2007 VIOS
Join Date: May 2010
Location: Loiza,Puerto Rico
Posts: 1,121
That's great news, CT saves the day again, marschall post pics of the install to see how she's looking
big lo is offline   Reply With Quote
Old 01-18-2011, 07:38 AM   #7
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
http://www.youtube.com/watch?v=XG6r69E-7uQ Problem is that the light only illuminates when i press the starter but its suppose to illuminate throughout while driving wht to do?
Attached Images
File Type: jpg IMG0095A.jpg (52.5 KB, 553 views)
File Type: jpg IMG0097A.jpg (77.1 KB, 544 views)
marschall is offline   Reply With Quote
Old 01-18-2011, 08:29 AM   #8
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Can you scan and post the wiring diagram that came with it? On Pivot's website, the wire colors that they show in their install guide are completely different (white, yellow, red and black). They mention that their are many counterfeit versions of their products, so I have a feeling that yours might be just that.
__________________
CTScott is offline   Reply With Quote
Old 01-18-2011, 08:46 AM   #9
henry33
 
Drives: yaris1.33
Join Date: Jul 2010
Location: slovakia
Posts: 425
it is so simple ? just two wires and it is done ? you must be kidding, I am going to buy it asap :)
henry33 is offline   Reply With Quote
Old 01-18-2011, 09:55 AM   #10
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Not to threadjack with shameless self promotion, but I developed a Push to Start inteface module that uses the OEM Toyota Push to Start Switch thanks to some interest over on the MI forum. For RHD Yaris, only the module and a Toyota PTS switch is needed. For LHD ones, a replacement trim piece is needed to neatly mount the switch (of which I imported a bunch from Europe).

PTS - Prewired.jpg

PTS Trim 2.jpg

Here's a video of my first test run with it:
http://www.youtube.com/watch?v=v6zinlD58Eg
__________________
CTScott is offline   Reply With Quote
Old 01-18-2011, 10:49 AM   #11
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
Actually its all in Japanese and yes i saw this video i didnt know it was you btw the instructions are in black and white and no mention of colour but i will upload the pics maybe ur right it might be a replica type of a button
marschall is offline   Reply With Quote
Old 01-18-2011, 11:24 AM   #12
henry33
 
Drives: yaris1.33
Join Date: Jul 2010
Location: slovakia
Posts: 425
scott how much does this kit cost ?
henry33 is offline   Reply With Quote
Old 01-18-2011, 11:36 AM   #13
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
will these help
Attached Images
File Type: jpg 1286713183430_hz-cnmyalibaba-web1_30577.jpg (52.4 KB, 539 views)
File Type: jpg b_c1m79k699583_0.jpg (46.1 KB, 543 views)
File Type: jpg nengun-2197-01-pivot-engine_starter_switch.jpg (55.0 KB, 542 views)
Attached Files
File Type: pdf ES-e.pdf (300.0 KB, 81 views)
marschall is offline   Reply With Quote
Old 01-18-2011, 11:43 AM   #14
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
That is so weird that it does not indicate colors (nor match the colors from the pivot manual).

Can the "relay box" cover be removed to reveal the mysteries within?
__________________
CTScott is offline   Reply With Quote
Old 01-18-2011, 12:02 PM   #15
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
*ahem* Sir i already have it fixed inside perhaps i could open it but dont u think it would be a bit risky
marschall is offline   Reply With Quote
Old 01-18-2011, 12:09 PM   #16
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by marschall View Post
*ahem* Sir i already have it fixed inside perhaps i could open it but dont u think it would be a bit risky
It does look like a sealed case, so it probably wouldn't be a good idea to try to open it. Based on the wire colors and positions, as long as the red wire is connected to the pink wire on the key switch connector, the unit will receive power when the ignition switch is in the on position and the light should come on.

You might want to try emailing Pivot to see what they say.
__________________
CTScott is offline   Reply With Quote
Old 01-18-2011, 12:16 PM   #17
marschall
 
Drives: vitz 06
Join Date: Nov 2010
Location: Pakistan
Posts: 18
Hmm both the red and blue wire is connected 2 the pink one, perhaps if i try connecting the other blue wire to a different black wire.But thank u anyways atleast its working and shows a little light when i push it
marschall is offline   Reply With Quote
Old 01-18-2011, 12:25 PM   #18
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by marschall View Post
Hmm both the red and blue wire is connected 2 the pink one, perhaps if i try connecting the other blue wire to a different black wire.But thank u anyways atleast its working and shows a little light when i push it
I think the blues are fine, as to crank the starter you need to jump power to the black wires, and having one on pink and the other on the black wires does that.
__________________
CTScott is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
GB- Push to Start , With SMART ENTRY 1NZYaris1 Items for Sale by private party 32 12-07-2011 01:10 AM
FS: Push to Start Trim Piece CTScott Items for Sale by private party 36 05-28-2010 12:42 PM
Push Button Start Stoln Europe (continental) 20 05-24-2010 07:56 AM
push start vs electric start? yaris2010RS General Yaris / Vitz Discussion 18 04-07-2010 02:20 PM
push to start engine button DIY (done) yarismo DIY / Maintenance / Service 6 03-31-2010 04:21 PM


All times are GMT -4. The time now is 05:19 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.