Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 05-18-2022, 09:42 AM   #1
esse10
 
Drives: 2009 yaris 2 door
Join Date: Feb 2013
Location: richmond TX.
Posts: 232
Front hub Axle nut torque process

I know that the torque value is 160 flbs for the front hub Axle nut but was wondering if you stretch the nut first like other vehicles. On some vehicles you go up to 180-200, (that stretches the nut) then come back one complete turn , then torque back to the desired value. Or is this just a strait 160 torque and stake the edge, leave alone?
esse10 is offline   Reply With Quote
Old 05-18-2022, 06:28 PM   #2
kevinj93
 
kevinj93's Avatar
 
Drives: 2013 NCP130
Join Date: Nov 2015
Location: Sydney, Australia
Posts: 376
The series 3 service manual just says that the threads should be cleaned first with a non-residue solvent, and to keep the threads free of oil and foreign objects.

It just gives the torque value, then says to stake the nut with a chisel and hammer.

Edit: fixed typos.
__________________
Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam.

Last edited by kevinj93; 05-21-2022 at 04:02 AM.
kevinj93 is offline   Reply With Quote
Old 05-19-2022, 04:28 PM   #3
esse10
 
Drives: 2009 yaris 2 door
Join Date: Feb 2013
Location: richmond TX.
Posts: 232
hub nut

Quote:
Originally Posted by kevinj93 View Post
The service manual just says that the threads should be leaned first with a non-residue solvent, kand to keep the threads free of oil and foreign objects.

It just gives the torque value, then says to stake the nut with a chisel and hammer.
hey thanks for the input. i guess it's just a strait 160 flb torque/stake. I'm replacing my front bearing tomorrow , it'll be a first time evolution for me of pressing out and pressing in the new bearings, fun fun fun.
esse10 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front control arm bolt spinning E34_Guy DIY / Maintenance / Service 5 06-03-2022 07:14 PM
installing Penguin Garage rear hub spacers! Tamago DIY / Maintenance / Service 101 05-21-2011 12:29 PM
Newly refreshed 2011 Toyota Corolla Kal-El Off-topic / Other Cars / Everything else Discussions 23 11-27-2010 12:57 PM
I CANNOT get the front strut nut off naossoan DIY / Maintenance / Service 10 05-30-2009 03:11 PM
Torque Settings, front suspension Nimble Wheels, Tires and Suspension Forum sponsored by The Tire Rack 1 02-21-2007 01:00 PM


All times are GMT -4. The time now is 08:40 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.