HOW TO PUT THE 10K POTENCIOMETER AND A COUPLE OF MY MODS - Page 2 - Toyota Yaris Forums

YarisSedan · 03-27-2009, 11:22 AM

Those hoses you removed are for the PCV system. Google it and probally read up what it is for and what it does. At the very very last where valve cover is put a breather tube there. So the engine can vent into your hood. And put corrosive crap that will eat through paint in the area and under your hood. Atleast you wont cause oil leaks. That is a mod that "racers" do who install aftermarket intakes that dont have a port for the pcv hose. If you are concerned about oil contaminating the intake manifold you could just simply install a oil catch can.

jouna · 03-27-2009, 12:02 PM

thanks nexus1155 and thaks yaris sedan lets see if next week i order the pulleys and do a dyno with the potentiometer and without it and with the cutout and without it i'll post it as soon as i do it

03-27-2009, 11:22 AM	#19
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Those hoses you removed are for the PCV system. Google it and probally read up what it is for and what it does. At the very very last where valve cover is put a breather tube there. So the engine can vent into your hood. And put corrosive crap that will eat through paint in the area and under your hood. Atleast you wont cause oil leaks. That is a mod that "racers" do who install aftermarket intakes that dont have a port for the pcv hose. If you are concerned about oil contaminating the intake manifold you could just simply install a oil catch can. __________________ http://www.cardomain.com/ride/3210549

03-27-2009, 12:02 PM	#20
jouna Drives: jdm yaris sedan Join Date: Feb 2009 Location: bayamon puerto rico Posts: 433	thanks nexus1155 and thaks yaris sedan lets see if next week i order the pulleys and do a dyno with the potentiometer and without it and with the cutout and without it i'll post it as soon as i do it