|
12-21-2010, 07:49 PM | #1 | |
Drives: 07 Yaris 3dr LB (Bayou Blue) Join Date: Oct 2008
Location: Raleigh, NC
Posts: 2,602
|
Bi-Xenon High Beams Not working
My high beams on my bi-xenon hid kits stopped working.
I dont hear the "thud" of them tilting anymore? any tips to fix??? the regular beams still work, and the indicator light on the dash comes on, the fogs turn off and normal lights stay on, but no high beam!
__________________
-Jen <3 Quote:
|
|
12-21-2010, 10:09 PM | #2 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
With the kit that you bought, how is the high beam solenoid (the device that flips the shield) wired? Does the ballast control it, or is it wired directly to the high beam feed?
__________________
|
12-22-2010, 09:03 AM | #3 |
daily driver
|
likely need new HID bulbs...
__________________
|
12-22-2010, 10:27 AM | #4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
You have much more experience with the HID kits than I do, but my understanding is that many of the HIDs with the solenoid shield have issues with the solenoids burning out due to over driving them. There are three wire solenoids that have two coils - A high current one for flipping the shield and a low current one to hold it once it is flipped. The high current one isn't intended to be left on for holding.
__________________
|
12-22-2010, 11:57 AM | #5 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Doesn't that kind of bulb only make one brightness? --- If lo/hi is controlled by a solenoid, and low beams light up, then the bulb is good right?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-22-2010, 12:17 PM | #6 |
daily driver
|
bulb sounds like itd be a "flexible" bulb where it tilts for the high beam
ive seen them stop working every now and then...its just easier to get a new bulb/bulbs if you want high beams... depending on when/where you got it, it SHOULD be warrantied
__________________
|
12-22-2010, 11:14 PM | #7 | |
Drives: 07 Yaris 3dr LB (Bayou Blue) Join Date: Oct 2008
Location: Raleigh, NC
Posts: 2,602
|
Well, as far as a waranty, Im not sure, can you chime in Caliyaris? I got them from you ....
The low beams are working fine, so why would I need new bulbs? shouldnt it just be a wiring issue? if anything I would have thought a new harness would be the fix. I really dont want to have to change it all out though! :(
__________________
-Jen <3 Quote:
|
|
12-22-2010, 11:36 PM | #8 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Mine don't have "flexible bulbs", just the one with a solenoid-controlled shield.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-23-2010, 07:18 AM | #9 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Do your kits have the two wire or three wire solenoids?
__________________
|
12-23-2010, 08:01 AM | #10 |
The Beautification of Car
|
8 out of 10 problems on my car about hid highbeam is the relay Harness i went throught with 3 relay harness in 1 year, and them relay harness cost you around 30?
|
12-23-2010, 09:57 AM | #11 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
@ CTScott - 2 wires, pretty sure.
@ OP: if you are within warranty you get new parts, but we need to clarify which parts you need.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-23-2010, 12:06 PM | #12 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
OK - If it's this kit from your store, then it looks like the solenoid is controlled by the ballast. So, it could either be the solenoid or the driver that is bad, but I would think that the solenoid is the more likely culprit.
__________________
|
12-23-2010, 12:30 PM | #13 |
daily driver
|
that looks like an h11 kit...
i don't have any pics of the kits i sell right now, but i can take a pic of the wiring harness, etc later the ones i use have 2 wire solenoid (iirc) that moves the bulb
__________________
|
12-23-2010, 12:38 PM | #14 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ alright, I'll also post a pic of the H4 kits I have.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-24-2010, 02:21 PM | #15 | |
Drives: 07 Yaris 3dr LB (Bayou Blue) Join Date: Oct 2008
Location: Raleigh, NC
Posts: 2,602
|
the box I got was a dark black, I only got the lights less than a year ago maybe?>
__________________
-Jen <3 Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with low beams and High Beams | thebarbrr | DIY / Maintenance / Service | 7 | 09-22-2010 08:43 AM |
Yaris sedan low and high beam | jorizk | DIY / Maintenance / Service | 10 | 03-02-2010 09:49 AM |
High Beam Issues | urbanmindz | In Car Entertainment + Electronics (audio / video / alarm) | 0 | 03-19-2009 09:22 PM |
Package received from Taiwan! | GabL | Cosmetic Modifications (Exterior/Interior) | 74 | 09-25-2007 09:37 AM |
DIY - HID Retrofit | Violin | DIY / Maintenance / Service | 57 | 06-11-2007 06:17 PM |