|
08-11-2019, 08:38 PM | #1 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
Replacing intake manifold gasket
I changed the intake manifold gasket on my 2007 Yaris. It was relatively easy . I took some pics.
|
08-11-2019, 08:44 PM | #2 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
I drained the coolant from water pump lower hose.
|
08-11-2019, 09:06 PM | #3 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
I removed air hose between throttle body and filter box and disconnected vacuum lines and radiator cap pipe from throttle body. All bolts and clamps were 10mm
|
08-11-2019, 09:13 PM | #4 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
Wiring housing needs removed. Your can see the 12mm intake manifold bolts .
|
08-11-2019, 09:25 PM | #5 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
The spec for intake is 30nm. I tested it with a torque wrench before removal. It clicked and fasteners didn’t move . If the intake fastener moved spec would be lower. I got spec from English Haynes manual . I used a matco 8 inch long 1/4 drive ratchet . It worked but if I do it again I’m using my 11 inch long Armstrong 3/8. Thottle body wouldn’t come off. I moved intake forward skipped out old gasket and put new one in. Note old gasket was oily .
|
08-11-2019, 09:40 PM | #6 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
Put everything back together and used lisle funnel to add coolant. Run heater on full blast. Funnel helps burp air out . Note bubbles
|
08-11-2019, 09:54 PM | #7 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
Crappy rusty bent out of shape factory air box hose clamp
|
08-11-2019, 09:56 PM | #8 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
New stainless one I installed
|
08-13-2019, 03:30 PM | #9 |
Drives: Yaris 2008 Sedan Join Date: Nov 2010
Location: California
Posts: 85
|
What was the reason/symptoms for changing the gasket? Just curious.
|
08-13-2019, 05:51 PM | #10 |
Drives: Olive yaris,FRS, Dakota R/T Join Date: Aug 2013
Location: Pa
Posts: 147
|
Intermittent misfire cylinder 1. Turned out to be fuel injector . Thought maybe vacuum leak in intake . The gasket was oily so it wasn’t a bad thing. Plus only cost $11 for a fel pro plus some Toyota coolant
|
08-14-2019, 05:34 AM | #11 |
Drives: Toyota Vios Join Date: Feb 2013
Location: MY
Posts: 49
|
nice, wish to see anyone can DIY to replace front sway bar bush
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Micro Image/Golden Eagle Intake Manifold Review | tmontague | Performance Modifications | 18 | 01-03-2017 08:24 PM |
FS: Ported (for 1zz) OEM intake manifold | tmontague | Items for Sale by private party | 6 | 04-01-2016 11:25 PM |
JB Weld stock intake manifold port w/ 1ZZ Throttle Body | tmontague | Performance Modifications | 2 | 10-07-2015 09:31 PM |
Intake Manifold Gasket? | Nexus1155 | DIY / Maintenance / Service | 6 | 11-18-2008 08:03 PM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |