Part # Matching - Toyota Yaris Forums

jmew0ng · 10-16-2012, 05:51 AM

I'm trying to find the part number for the 09-11 RS Front bumper... and I wanted to know if anyone could confirm this for me.

I got this link off of one of the threads
http://www.toyodiy.com/parts/p_J_201...HMVK_5201.html

but does this part number

Quote:

52119‑52640‑A0

match up to this type of bumper

CTScott · 10-16-2012, 10:14 AM

That is correct.

jmew0ng · 10-16-2012, 03:09 PM

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

WeeYari · 10-16-2012, 03:31 PM

There is a chance that the black wheel well liners will have a wonky fit. I swapped my pre-'09 facelift rear bumper for one from a '10. The liner didn't line up quite properly at the very bottom due to a slightly different curve in the bumper.

CTScott · 10-16-2012, 04:22 PM

Quote:

Originally Posted by jmew0ng

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

Besides the bar you would need the upper grill (53111-52610).

The lip is not in the JDM EPC.

enviri · 10-16-2012, 07:18 PM

upper grill, lower grill, tow hook cover, fogs (if you dont have em already) -- the front lip is modellista.

ilikerice · 10-16-2012, 08:40 PM

07-08 had slightly different headlight gaps then the 09-11.. unless the JDM is the same from 07-11.. All you gotta do is get the 09-11 headlights instead of using the 07

jmew0ng · 10-17-2012, 04:54 AM

Quote:

Originally Posted by ilikerice

07-08 had slightly different headlight gaps then the 09-11.. unless the JDM is the same from 07-11.. All you gotta do is get the 09-11 headlights instead of using the 07

yeah this is what I'm planning on doing, I just really like the look of that RS bumper.. don't know a body shop that could do a good fitment for the replica and I just happen to know people in HK... so I figured I'd take a shot at asking them on part numbers and see how much of a cost difference i'll get.

WeeYari, is it wonky enough to make the part over the tire rub? I'm okay with a "not so perfect" fit on that part as long as I don't rub

and thanks everyone for the responses!

ilikerice · 10-17-2012, 11:42 AM

Quote:

Originally Posted by jmew0ng

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

Sorry, I totally missed that sentence in your post.

thebarber · 10-17-2012, 09:26 PM

09-11 front bumpers will fit on 06-08 yarii with very minor modification. The front plastics for 07/08 USDM yarii should work fine on 09-11 bumpers...they did on mine

jmew0ng · 11-08-2012, 04:04 PM

Oh I guess another question while I'm still hunting down for these parts....

the side skirt on the picture, is that a vitz rs side skirt? or maybe one from modellista?

pj. olsson · 11-09-2012, 03:00 PM

I think it`s the modellista one....

Greez from Germany

PJ.

Visit my Homepage: www.germanvitzrs.jimdo.com

10-16-2012, 10:14 AM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	That is correct. __________________

10-16-2012, 03:31 PM	#4
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	There is a chance that the black wheel well liners will have a wonky fit. I swapped my pre-'09 facelift rear bumper for one from a '10. The liner didn't line up quite properly at the very bottom due to a slightly different curve in the bumper. __________________

10-16-2012, 07:18 PM	#6
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,516	upper grill, lower grill, tow hook cover, fogs (if you dont have em already) -- the front lip is modellista. Last edited by enviri; 10-16-2012 at 08:46 PM.

10-16-2012, 08:40 PM	#7
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	07-08 had slightly different headlight gaps then the 09-11.. unless the JDM is the same from 07-11.. All you gotta do is get the 09-11 headlights instead of using the 07 __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

10-17-2012, 09:26 PM	#10
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	09-11 front bumpers will fit on 06-08 yarii with very minor modification. The front plastics for 07/08 USDM yarii should work fine on 09-11 bumpers...they did on mine __________________

10-16-2012, 03:09 PM	#3
jmew0ng Drives: Scion FRS Join Date: Aug 2006 Location: Arizona Posts: 179	If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar) and is that lip listed in there? Or does anyone know the part number to that?

11-08-2012, 04:04 PM	#11
jmew0ng Drives: Scion FRS Join Date: Aug 2006 Location: Arizona Posts: 179	Oh I guess another question while I'm still hunting down for these parts.... the side skirt on the picture, is that a vitz rs side skirt? or maybe one from modellista?

11-09-2012, 03:00 PM	#12
pj. olsson View User's Garage Drives: Toyota Yaris TS 5 Door Join Date: Apr 2010 Location: Germany Posts: 257	I think it`s the modellista one.... Greez from Germany PJ. Visit my Homepage: www.germanvitzrs.jimdo.com __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Carbon fiber wrapping	Brian	Wash, Wax, Detailing, Exterior Repairs	15	07-10-2016 12:34 PM
Part Number for Canadian RS Piano Black Center Console part #?	DeathBeard	General Yaris / Vitz Discussion	12	06-14-2012 11:44 AM
2008 OEM S model Liftback Lip kit Part numbers	PETERPOOP	Cosmetic Modifications (Exterior/Interior)	17	07-26-2010 01:33 PM
part number for Antenna	cr.chango	DIY / Maintenance / Service	3	11-13-2009 02:40 PM
NEED HELP - Yaris suspension part	Trish	General Yaris / Vitz Discussion	10	11-07-2009 01:44 PM