|
03-07-2007, 07:05 AM | #1 |
Scubie Du
Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006
Location: Houston, TX
Posts: 350
|
some minor problems after installing my HID kit, any professionals?
hello mates,
I've just installed my HID kit 2day and I have some minor problems with it 1st is with the level of light, it's not balanced ... can I do it or does it need professional work??? 2nd is that the right hand side bulb is shaking (the light is not stable) like if it is not tightened ... what can I do about that??? 3rd when I turn the high beam on ... it seems to me like if one is faster that the other ... any solution? sorry for the stupid questions (well, if they are) but I want ur help please cYa
__________________
-AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris? |
03-08-2007, 12:59 AM | #2 |
Scubie Du
Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006
Location: Houston, TX
Posts: 350
|
34 visits without any answer?
:(
__________________
-AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris? |
03-08-2007, 02:15 AM | #3 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Shhh... the experts are sleeping. Check tomorrow.
|
03-08-2007, 02:39 AM | #4 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
Well I am no expert, but for the level of brightness and the delay for high beams, it does sound like bad wiring somewhere...
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ... |
03-08-2007, 03:12 AM | #5 |
Will work for Yaris...
Drives: Yaris Join Date: Feb 2006
Location: Brisbane, Australia
Posts: 191
|
In terms of beams not balancing...
Look at the headlight casing... there should have a small 'white cross' which you 'insert' a screw driver and adjust your beam up & down accordingly... please do that against a wall preferably at night... or in garage... Also you would need to rebalance your beam (lower the low beam) so your HID dont glare oncoming cars during night time... the beam should not be higher than a regular sedan's right or left rear view mirror... Cheers |
03-08-2007, 06:21 AM | #6 |
What kit do you have?
I don't know what you mean by balanced - care to expand? As far as the bulb shaking- are you sure it is properly seated and the clips locked on it? If yes, then you may have a problem with the kit. A delay in coming on? - Does your kit use halogen bulbs for the high beam? Do you have a harness that runs the high beams off the battery or through the stock wiring? |
|
03-08-2007, 09:35 AM | #7 |
Scubie Du
Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006
Location: Houston, TX
Posts: 350
|
the shaking problem, it's done ... I double checked the bulb and it is o'right @ the time
for the delay problem , not yet solved (My kit is low and hi HID in one bulb - the bulb moves up & down) for the balancing I'll try it 2morrow Thanks alot guys for the help waiting for the proper answer for the delay issue cYa
__________________
-AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris? |
03-08-2007, 12:02 PM | #8 |
Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006
Location: Southern California
Posts: 439
|
does your wiring include have just one hook up off the stock harness? meaning the stock plug for your original headlights plugs into a relay that activates both ballasts? Like was asked before, what kit did you buy? if you have the same kit i do, the reasoning behind that is the same as any type of parallel wiring scheme.........the first bulb has to fire up and then it will send its current to the other bulb....i was redoing a bathroom and added a secondary light and just tapped off the original light, when i first hit the switch there was a little delay, and when i turned it back off and did it again the delay was so small if at all any. so what im saying is if you wired it like i said, and if you fire it up, let it warm up, turn it off, and wait a couple seconds and it still has a delay yes you have a problem.....but if you do that and theres hardly a delay, its just normal.....
get us a link to the kit you bought.....that would help a lot of us out in answering some of your questions.....
__________________
TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........ |
03-08-2007, 12:28 PM | #9 |
Modification Condoner.
Drives: 2007 Black Sand Liftback Join Date: Jan 2007
Location: Chicago, IL
Posts: 360
|
It's karma for installing HID's into reflectors. It's the spirits of all the drivers you're going to be pissing off with that ricey refleting all over the place kit (lemme guess, you bought 10K to look "blue"). Throw it in the garbadge, the stock reflector halogen set up works well.
__________________
Tanabe DF, Debadged, stripped, Black emblems |
03-08-2007, 12:30 PM | #10 | |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Quote:
|
|
03-08-2007, 04:14 PM | #11 |
JOE GIRTH
Drives: YARIS 3DOOR Join Date: Feb 2007
Location: ROCKLAND TOYOTA/SCION
Posts: 369
|
he is right about the blue 10k's....
__________________
http://www.carid.com/toyota-accessories/ site has a FEW interesting yaris items..... |
03-08-2007, 09:25 PM | #12 |
Scubie Du
Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006
Location: Houston, TX
Posts: 350
|
here is the kit i got
http://cgi.ebay.com.au/ws/eBayISAPI....DME:B:AAQ:AU:1 Nimble I didn't pay the money to throw the kit away, and I'm not using stock reflectors in my setup By the way, my HID kit is 6000K Super White, I don't like the blue look, just wanted good light source , and even if it was 12000K, it is up2me, I can't imagine my car running on stock wheels, but I don't offend any one for doing it :) It's what they like (maybe) BACK TO THE HID PROBLEM the kit is using it's own wiring harness, and nothing is stock and the delay is not that noticable, so if it's normal, I'll live with it thanx alot guys for the help cYa
__________________
-AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris? |
03-08-2007, 10:31 PM | #13 |
Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006
Location: Southern California
Posts: 439
|
so your stock harness plugs into the ballast...then out of the ballast into your headlight.......and that it?
__________________
TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........ |
03-09-2007, 10:39 AM | #14 |
Scubie Du
Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006
Location: Houston, TX
Posts: 350
|
no
the ballasts are connected to the stock harness, and from the ballaststo the headlights, it is a new harness that came with the kit
__________________
-AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris? |
03-09-2007, 10:54 AM | #15 |
Super Moderator
|
Im sitting this one out.... sorry.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is aftermarket HID kit legal (in NJ)? | Jfoofoo | Cosmetic Modifications (Exterior/Interior) | 25 | 03-19-2009 02:05 PM |
Closest to a HID kit? | IsLNdbOi | Cosmetic Modifications (Exterior/Interior) | 62 | 03-18-2009 12:44 AM |
best HID kit or bulb? | flip_yaris | Cosmetic Modifications (Exterior/Interior) | 21 | 01-21-2007 12:23 PM |
HID Kit XENON Brand | Yaris-TJ | Cosmetic Modifications (Exterior/Interior) | 18 | 10-27-2006 09:46 AM |