Need some information on wheels & springs - Toyota Yaris Forums

ET Yaris · 11-09-2008, 12:32 PM

I'm about to buy a Hatch and wanted to know 2 things. Without having to go with coil overs what springs lower the car the most? On a 19x7.5 wheel what would be the offset I would need to tuck the wheels a tad bit? I'm very new to the Yaris scene and would appreciate any help.

Thank you

And if you have any pics of Yaris with 19 wheels please post. I cant seem to find any.

Kaotic Lazagna · 11-09-2008, 02:48 PM

I think the Tein S.Tech's provide the most drop of the springs. Although, there have been several other options out now since I had to decide on mine. As for the 19's, I'm not sure on what would be a good offset, but for comparison, 17's should be +42.

*kimona* · 11-09-2008, 04:21 PM

No less than ET42 up front. ET45 would be better.

largeorangefont · 11-10-2008, 01:24 AM

Get the TRD springs or Tanabe NFs if you want to run 19s. Going lower will probably rub on stuff.

Offset of +42 +45. 215/35/19 is the size you will need.

11-09-2008, 12:32 PM	#1
ET Yaris Drives: New Join Date: Nov 2008 Location: Miami Posts: 3	Need some information on wheels & springs I'm about to buy a Hatch and wanted to know 2 things. Without having to go with coil overs what springs lower the car the most? On a 19x7.5 wheel what would be the offset I would need to tuck the wheels a tad bit? I'm very new to the Yaris scene and would appreciate any help. Thank you And if you have any pics of Yaris with 19 wheels please post. I cant seem to find any.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bump stop length for drop springs.	PetersRedYaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	19	02-17-2010 08:37 AM
forged rims Vs. alloys	red-jdm	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	07-23-2007 08:30 PM
Feedback on these wheels	BulletProofAuto	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	21	06-04-2007 08:09 PM
Information about lowering Springs	Dan	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	10-08-2006 01:01 AM
Factory Lowering Springs + MAX Wheels? What are the options?	bigsky2	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	05-24-2006 08:10 PM

11-09-2008, 02:48 PM	#2
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	I think the Tein S.Tech's provide the most drop of the springs. Although, there have been several other options out now since I had to decide on mine. As for the 19's, I'm not sure on what would be a good offset, but for comparison, 17's should be +42.

11-09-2008, 04:21 PM	#3
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	No less than ET42 up front. ET45 would be better.

11-10-2008, 01:24 AM	#4
largeorangefont Break'em off some. View User's Garage Drives: 07 Yaris LB, 04 Cobra Join Date: Jan 2007 Location: So Cal, OC Posts: 854	Get the TRD springs or Tanabe NFs if you want to run 19s. Going lower will probably rub on stuff. Offset of +42 +45. 215/35/19 is the size you will need.