|
04-08-2014, 07:56 AM | #1 |
Drives: 09 Meteoric Metallic 3 door HB Join Date: Jul 2010
Location: Atlanta Georgia
Posts: 419
|
Possible limp mode?
Hey guys,
I just installed a port and polished throttle body on my yaris to go on my blitz supercharger. I started it up this morning, worked okay until I stopped at a stop sign and it wouldn't go anywhere. I press the gas, nothing happens, and i'm getting a CEL. The only way I can fix it is to turn off the car and then turn it back on, then the throttle works for a brief moment until I slow down or go around 2k RPM's again. Not sure what the code is, I was getting a rich condition CEL before but I think this is different. Any idea why it's doing this? I'm thinking I should switch it back to the old TB. |
04-08-2014, 08:01 AM | #2 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Sounds like the throttle position sensor may be bad on the new TB. You really need to read the code though, as anything else is just speculation.
__________________
|
04-08-2014, 08:03 AM | #3 | |
Drives: 09 Meteoric Metallic 3 door HB Join Date: Jul 2010
Location: Atlanta Georgia
Posts: 419
|
Quote:
Unfortunately it happened on my way to work to catch the bus, and I didn't have time to fool with it much. I'll see what I can come up with. It shouldn't be bad though as it's a brand new throttle body. |
|
04-08-2014, 08:09 AM | #4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Maybe it didn't fare well through the port and polish.
__________________
|
04-08-2014, 08:10 AM | #5 |
Drives: 09 Meteoric Metallic 3 door HB Join Date: Jul 2010
Location: Atlanta Georgia
Posts: 419
|
That's possible. I'll probably have to swap it out tonight.
|
04-09-2014, 10:32 AM | #6 |
Drives: 09 Meteoric Metallic 3 door HB Join Date: Jul 2010
Location: Atlanta Georgia
Posts: 419
|
Swapped it back to stock, works great now.
Must be the position sensor. |
04-09-2014, 11:28 AM | #7 | |
play every day
Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012
Location: Los Angeles
Posts: 1,961
|
Quote:
If your stock chip works, simply put it on the new throttle body. The rivets drill out easily, and small 8-32 nuts and bolts do the job. (throttle body on the right has a bolted on chip) Greg |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
limp mode? | Golddeenoh | DIY / Maintenance / Service | 6 | 06-13-2013 05:08 PM |
How to force OPEN LOOP mode on OE ECU?? | maxthehax | Forced Induction Forum | 5 | 05-27-2013 09:42 PM |
does defrost mode affect mileage? | nikvolkert | Fuel Economy Forum | 15 | 10-21-2010 10:39 PM |