At it again...Another Wheel Restoration

[kimona]

Dark is good. I really like them! You did a marvelous job. And, you created a little excitement on the yarisworld forum.

EDIT: I may consider painting the centre caps the same "root beer" colour and getting some black lug nuts.

(But, I presume you're switching caps and lugs with your other set of alloys).

[NYC-SE]

Almost looks root beer..ish. You did an excellent job.

[Neinris]

WOW!

[06YarisRS]

Originally Posted by kimona

Dark is good. I really like them! You did a marvelous job. And, you created a little excitement on the yarisworld forum.

EDIT: I may consider painting the centre caps the same "root beer" colour and getting some black lug nuts.

(But, I presume you're switching caps and lugs with your other set of alloys).

Thanks! Yes, I do switch out the caps and lug nuts. However, before the discussion, I ordered another set of caps (silver). I am now eyeing some Toyota (aftermarket) black center caps - inked below - and some black lug nuts.

I have to do some measurements on the Hyundai wheel. The Yaris has a 54 mm center bore, but these caps vary from 52mm to 57mm. I think that's the outer diameter of the cap itself. But the Toyota caps actually recess into the Hyundai wheel. I think the 57mm cap would sit on top of the hole and not snap into place; not engaging the retaining tabs.

https://www.ebay.com/itm/X4-TOYOTA-W...8AAOSwUqJdu7fL

Or

https://www.ebay.com/itm/X4-TOYOTA-W...IAAOSw1p1d-xfX

EDIT: After looking at these caps again, they're kind of glossy. Maybe a more matte/flat would look better. I suppose I could clear coat them with a matte as long as the plastic didn't react adversely. Also thinking about satin or matte back lug nuts. Am I getting carried away?

EDIT 2: If the silver caps I already ordered actually fit, I could just paint them satin black.

[06YarisRS]

Originally Posted by NYC-SE

Almost looks root beer..ish. You did an excellent job.

Thanks man. Yeah, makes me want to go to A&W.

[06YarisRS]

Originally Posted by Neinris

WOW!

I think they're growing on me. We'll see with black lugs and center caps.

[Steve35]

Originally Posted by 06YarisRS

OOh, that's nice! Super nice turbo Miata. That is an intercooler in there, right? The black does really go well with the silver/grey! Haha, just noticed the car in the background. Also silver, with black wheels. This helps. Can't quite tell from the pic, but are yours gloss or satin finish?

Turbo is right, its a 2004 Mazdaspeed Miata on one of two years Mazda turboed them. The color is Matt Black. I got them here.

https://www.good-win-racing.com/Mazd...t/61-2677.html

Steve

[ern-diz]

As I said on the 'gram, I dig it.

Interesting that Kimona favors the darker, but doesn't like black wheels. I have black wheels, but as I commented to you on Instagram, think a shade or two lighter would work even better.

Beauty is in the eye of the beholder!

[06YarisRS]

Originally Posted by Steve35

Turbo is right, its a 2004 Mazdaspeed Miata on one of two years Mazda turboed them. The color is Matt Black. I got them here.

https://www.good-win-racing.com/Mazd...t/61-2677.html

Steve

I had a look. Very nice wheels, indeed! Before I decided to save a few bucks and go with another set of Accent rims, I was looking at these.

https://www.canadawheels.ca/fast-whe...dvehicle=81922

And for a bit more...

https://www.canadawheels.ca/ultra-wh...dvehicle=81922

[06YarisRS]

Originally Posted by ern-diz

As I said on the 'gram, I dig it.

Interesting that Kimona favors the darker, but doesn't like black wheels. I have black wheels, but as I commented to you on Instagram, think a shade or two lighter would work even better.

Beauty is in the eye of the beholder!

Absolutely! A couple shades lighter would have been preferable. I still think black wheels would look good on my car. If the paint fails on these wheels - chips or doesn't generally wear well and they get unsightly - I'll repaint them with a single stage urethane and may go with graphite. I really think that graphite would look great against the silver.


Edit: I'm actually thinking about applying a 2K clear coat over these wheels. It is advised against - being a 1K enamel - but if I dust 2 to 3 coats on and let them flash off, I might get away with heavier coats after that. I actually sprayed a little clear coat on one of the playing cards that had over spray on it. There was no adverse reaction. I'll give the wheels a couple of weeks to cure fully if I go ahead with this.

[ern-diz]

Originally Posted by 06YarisRS

Absolutely! A couple shades lighter would have been preferable. I still think black wheels would look good on my car. If the paint fails on these wheels - chips or doesn't generally wear well and they get unsightly - I'll repaint them with a single stage urethane and may go with graphite. I really think that graphite would look great against the silver.


Edit: I'm actually thinking about applying a 2K clear coat over these wheels. It is advised against - being a 1K enamel - but if I dust 2 to 3 coats on and let them flash off, I might get away with heavier coats after that. I actually sprayed a little clear coat on one of the playing cards that had over spray on it. There was no adverse reaction. I'll give the wheels a couple of weeks to cure fully if I go ahead with this.

[lacienega]

They look great. What's the bolt pattern on these rims?

[06YarisRS]

Originally Posted by lacienega

They look great. What's the bolt pattern on these rims?

Thanks. The bolt pattern is 4 x 100.

Here's an 'informational' video I put together:

https://www.youtube.com/watch?v=y7noAaBv_5c

[lacienega]

Thanks, good info. And the center caps are the same size from accent and toyota ?

[06YarisRS]

Originally Posted by lacienega

Thanks, good info. And the center caps are the same size from accent and toyota ?

Indeed they are for these models of Toyota and Hyundai. Not sure about other models.

[Kaotic Lazagna]

They look good. Great job with them!