|
|
12-17-2017, 06:07 PM | #1 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
So you only want the front turn signals to be on. You don't want parking lights (front or back).
Same thing still Switchback relay. Has 3 wires. 1 is Ground / 12v for (parking light, DRL call it what you want) / turn signal. Then just wire a ignition wire that supplies 12v with key in on position. Or find a fuse location that is 12v with key in ACC / On. That will be your constant amber light. Then also wire the turn signal and it will act as usual. I'll slap something together on the car to show ya.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
12-20-2017, 02:53 AM | #2 | |
Drives: 2009 Yaris, 1994 HiLux Surf Join Date: Nov 2013
Location: Addis Ababa, Ethiopia
Posts: 48
|
Quote:
Took measurements at the headlight dimmer switch and there are 2 hot lines that drop to 0V when indicators are being used (black for left and violet for the right). Since they are hot normally, I think I can wire each to a relay and control each side. When blinkers are used the lines fall to 0V,which will open the relay and turn off the DRL characteristics. Then blinkers can blink away like usual. Tamrat,
__________________
The Surf is still here.... But now there is a Yaris next to it! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will local bay area members please stand up! | YarisSedan | California | 264 | 07-28-2009 11:53 PM |