Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 07-29-2014, 09:26 AM   #1
matchew76
I've made a post!
 
Drives: 1.5ts
Join Date: Jul 2014
Location: northampton
Posts: 1
Cool injectors

Hi...I have a 2001 1.5 t sport and was hoping for some help and info about how to change the injectors like how do I get them out to start
matchew76 is offline   Reply With Quote
Old 07-29-2014, 10:14 AM   #2
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,477
1. Depressurize the fuel system first (on your MK1, remove the EFI relay in the under-bonnet fuse box) and try to start the car.

2. Remove the plastic engine cover

3. Disconnect the injector connectors

4. Remove the plastic cover over the fuel rail to fuel line connection and disconnect the rail from the line.

4. Remove the fuel rail (two 10mm bolts mount it). In theory you have to remove the entire valve cover because the fuel rail is held captive by a notch on the valve cover, but I find that I can lift the fuel rail off the injectors and maneuver it just right to allow me to change injectors without removing the valve cover. You can also cut off the end of the retaining notch with a grinder or hack saw to allow you to fully remove the rail.
__________________
CTScott is offline   Reply With Quote
Old 07-29-2014, 11:17 AM   #3
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,324
Make sure you buy replacement o-rings BEFORE you try and remove the injectors. Odds are good that you will cut at least one o-ring in the process. Try to clean out the area around the bottom of the injectors to keep sand/dirt from falling into the cylinders. Also, be prepared to have gasoline spill on the engine and yourself.
CrankyOldMan is offline   Reply With Quote
Old 07-29-2014, 11:36 AM   #4
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,477
^ Excellent points.
__________________
CTScott is offline   Reply With Quote
Old 08-09-2021, 05:27 PM   #5
mik36
 
Drives: VERSO S
Join Date: Jul 2021
Location: Bromsgrove
Posts: 25
I have been looking for this information glad i found it

I have 1NRFE
i am looking to.access the fuel line to xlean injectors using the pipe method

I would be grateful if anyone can share some photos of the black connector that connect the fuel.line with metal rail how to.safely disconnect and reconnect that plug thing
mik36 is offline   Reply With Quote
Old 08-09-2021, 05:48 PM   #6
mik36
 
Drives: VERSO S
Join Date: Jul 2021
Location: Bromsgrove
Posts: 25
This is the fuel clamp or connector
https://parts.longolexus.com/oem-par...-no-2384121050

Is there a safe way to disconnect and reconnect
mik36 is offline   Reply With Quote
Old 08-16-2021, 05:25 PM   #7
mik36
 
Drives: VERSO S
Join Date: Jul 2021
Location: Bromsgrove
Posts: 25
Anyone
mik36 is offline   Reply With Quote
Old 09-02-2021, 11:55 AM   #8
mik36
 
Drives: VERSO S
Join Date: Jul 2021
Location: Bromsgrove
Posts: 25
I have 3 efi fuse
20A FUSE
7.5A FUSE
10A FUSE
mik36 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1zz injectors suit the S/C just fine LtNoogie Forced Induction Forum 51 04-30-2016 10:11 AM
Stock Injectors = Maybe? Big NO? maxthehax Forced Induction Forum 3 12-10-2012 05:29 PM
FS: DeatschWerks 550cc Plug/Play injectors Tamago Items for Sale by private party 4 06-27-2012 11:11 PM
1ZZ Injectors on NA Setup MGargano Performance Modifications 14 04-22-2010 01:02 AM
Technical question about bigger injectors LtNoogie Forced Induction Forum 1 08-14-2009 03:34 PM


All times are GMT -4. The time now is 01:22 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.