|
09-16-2014, 01:03 PM | #1 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
subaru strut homebrew coilovers!
Today i installed gc8 subaru struts, with ebay coilover sleeves, and its a pretty stiff ride with plenty of lows. ill post pictures later with my car cleaned up a bit. note how close the perch is to the mount vs yaris
|
09-16-2014, 01:44 PM | #2 |
Drives: 2010 Yaris Sedan Join Date: Oct 2010
Location: Kentucky
Posts: 529
|
How did you come to pick subaru struts?
|
09-16-2014, 05:55 PM | #3 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
^
i had a legacy and noticed the perch for the spring was lower and immediately thought moar lower. then i thought maybe a vehicle weighing twice as much might have more dampening so i threw them in! |
09-16-2014, 06:23 PM | #4 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Do the bolts on the new strut line up with the three holes in the strut tower on the Yaris?
|
09-17-2014, 12:12 PM | #5 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
iirc
there are only two holes in the yaris but i swapped the top hats over |
09-17-2014, 12:48 PM | #6 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Aah, clever. How hard is it to find the crash/camber bolt spacing on struts?
|
09-17-2014, 03:42 PM | #7 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
^
wellllll i used a plasma cutter... |
09-17-2014, 04:11 PM | #8 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
|
09-17-2014, 04:42 PM | #9 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
the results! excuse the dirt and cracked out bumper, as a rural paper route is NOT forgiving to a slammed yaris
|
09-17-2014, 09:04 PM | #10 |
Obsessed with 1.5L
Drives: '10 PW Yaris Sedan Join Date: Feb 2011
Location: Westminster, MD
Posts: 907
|
Interesting...
I need to find some shorter struts for my tercel...if those fit the Yaris then they are way too big for the terkle spindle
__________________
-Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr |
09-23-2014, 07:57 PM | #11 |
Drives: 2010 Yaris Sedan Join Date: Oct 2010
Location: Kentucky
Posts: 529
|
What coilover kit did you use with the subi struts and yaris top hats?
|
09-26-2014, 04:11 PM | #12 |
Drives: 07' Yaris sedan Join Date: Sep 2013
Location: Erie Pa.
Posts: 27
|
search coilover sleeve honda on ebay its the yellow ones 55 shipped
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Strut Tower Brace Bar | redyaris | DIY / Maintenance / Service | 18 | 03-16-2014 06:52 PM |
***2002 ECHO,Rear Apexi Coilovers to be modified to fit, Energy Sus bushings *** | Hussain-Vtec | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 0 | 06-27-2012 06:55 PM |
trade yaris for subaru wrx, maybe sti? | Fenrizwolf | Off-topic / Other Cars / Everything else Discussions | 24 | 09-10-2010 09:48 PM |
cusco coilovers installed | badhabitz | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 29 | 02-03-2007 04:43 PM |
C-ONE Front Strut Tower Bar - Installed & Impressions (Pics to Come) | bigsky2 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 20 | 01-10-2007 06:53 PM |