Remove Door Panel - 2004 model - Toyota Yaris Forums

james1987 · 02-15-2009, 04:26 PM

Hi. I have a dent on my 2004 (old model) yaris car door. I am wanting to remove the door panel to bang out the dent with a rubber mallet. I've searched the forum but can only find instructions for the newer models. Has anyone got any ideas how to do this?

Thanks.

IllusionX · 02-16-2009, 08:34 AM

it's pretty much the same instruction if you have manual windows.

if you have electric windows, then just unscrew all visible screws on the door, and pull..

02-15-2009, 04:26 PM	#1
james1987 I've made a post! Drives: Toyota Yaris 04 Join Date: Feb 2009 Location: Leeds Posts: 1	Remove Door Panel - 2004 model Hi. I have a dent on my 2004 (old model) yaris car door. I am wanting to remove the door panel to bang out the dent with a rubber mallet. I've searched the forum but can only find instructions for the newer models. Has anyone got any ideas how to do this? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM LB): Interior Light Color Change	revnull	DIY / Maintenance / Service	37	05-21-2016 12:59 PM
Yaris from New Zealand model - some differences to Canadian RS Yaris model	Super_BQ	General Yaris / Vitz Discussion	0	07-23-2007 02:54 AM
TSB's	WD-40	General Yaris / Vitz Discussion	27	06-06-2007 01:11 AM
Yaris Spanks Hybrids in Environmentally Friendliness in Dust to Dust report	nsmitchell	General Yaris / Vitz Discussion	45	05-08-2007 10:33 AM
[DIY] To remove logotipos of the mark	Sérgio Barros	DIY / Maintenance / Service	6	02-23-2007 07:32 PM

02-16-2009, 08:34 AM	#2
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	it's pretty much the same instruction if you have manual windows. if you have electric windows, then just unscrew all visible screws on the door, and pull..