|
03-24-2013, 05:19 PM | #1 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
Blitz Fuel Controller Issue
Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks.
At idle we run 14.5 A/F so that's normal. The light on the dial lights up when we get into boost and not vacuum. Normal. The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial. In boost in stays roughly around 14.5 but that is just in the air, not while driving. Any advise? Is the light on the fuel controller supposed to be on all the time? Angela |
03-24-2013, 07:31 PM | #2 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
The light on the little switch assembly should light when the clutch is engaged by the fuel controller.
__________________
|
|
03-24-2013, 10:11 PM | #3 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
But only when its engaged? Not constant?
Both the light on the dial and on the fuel controller box? |
03-24-2013, 10:50 PM | #4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
My fuel controller doesn't have a light on it, just the dial does. And, the light on the dial just comes on when the SC is engaged.
__________________
|
03-25-2013, 12:29 AM | #5 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
That light works. The A/F seems a bit off. Going to look at it a bit more tomorrow.
Everything engages, drove the car and A/F goes down to 12.5 after a little while. But its a dial type gauge from Glowshift so it may just react a little slowly. |
03-25-2013, 01:19 AM | #6 |
Drives: soarer Join Date: Feb 2011
Location: Beautiful British Columbia
Posts: 954
|
Where is your sensor installed?
Also just curious where did you install the gauge itself? |
03-25-2013, 02:01 AM | #7 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
180 degrees from the stock o2 sensor and put the gauge under the HVAC controls
|
03-25-2013, 06:52 AM | #8 |
Drives: bB NCP 31 2005 y Join Date: May 2011
Location: KHABAROVSK RUSSIA
Posts: 19
|
Toyota bB
|
03-25-2013, 06:59 AM | #9 |
Drives: bB NCP 31 2005 y Join Date: May 2011
Location: KHABAROVSK RUSSIA
Posts: 19
|
Toyota bB
Splitfire Injen |
03-25-2013, 10:12 AM | #10 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
I have no idea how the pictures are relevant
|
03-25-2013, 10:45 AM | #11 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
Now you know he's boosted too
|
03-25-2013, 10:51 AM | #12 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
03-25-2013, 11:22 AM | #13 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
Wideband
|
03-25-2013, 01:36 PM | #14 |
Drives: soarer Join Date: Feb 2011
Location: Beautiful British Columbia
Posts: 954
|
|
03-25-2013, 04:09 PM | #15 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Does 180 degrees mean the two sensors are pointing at each other in exactly the same place inside the pipe?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
03-25-2013, 05:25 PM | #16 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
Bot at each other. But in the same area of pipe yes. Too close would be weird an restrict air alot in that one place.
|
03-26-2013, 10:20 AM | #17 |
Drives: 09 5dr Yaris Join Date: Mar 2009
Location: Dallas, TX
Posts: 443
|
Finished. Everything works. Correct a/f the dhole way under boost. Idle a/f is perfect. Engages when it should according the the dial. It was a wiring problem. Used t taps like it said to and they almost cute the wires to the ecu. Had a friend solder them and its perfect can't even tell there is any extra wiring!!
|
03-26-2013, 10:37 AM | #18 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
awesome great news. Lets see some vids now. Any plan for dyno/tune?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blitz Fuel Controller Issue | wildmongoose26 | Forced Induction Forum | 1 | 05-06-2013 05:31 PM |
Yaris Fuel Pump | HTM Yaris | General Yaris / Vitz Discussion | 12 | 03-22-2012 03:34 AM |
NEED ENGINE CHECK LIGHT CODE LIST | Attitude | Forced Induction Forum | 12 | 04-11-2011 06:38 PM |
Blitz throttle controller | 808_Yaris | Performance Modifications | 43 | 10-22-2009 04:36 AM |
Blitz owners: fuel controller question | s3r3nity | Forced Induction Forum | 28 | 05-30-2009 09:19 PM |