View Full Version : heater not working water coolant level drops
Mike Hancock
11-03-2011, 08:13 AM
The heater is not reaching full temperature and there is a gurgling noise coming from it. Water coolant level drops but only needs approx 1 pint to top up. I have had radiator replaced and system drained and bled to refill. I just did a long journey and the car didn't overheat. Can't see any obvious leaks. Any ideas please?
ilikerice
11-03-2011, 09:35 AM
sounds to me air traped in the heater core.
Suggestion:
-drive up on a couple ramps or a steep incline.
-take off radiator cap
-turn car on, heater on high
-let run for a while (5-15mins)
-watch coolant see if it drop or air bubbles form.
I would invest in one of these:
http://www.google.com/products/catalog?q=coolant+funnel&hl=en&safe=active&um=1&ie=UTF-8&tbm=shop&cid=16445349217148080464&sa=X&ei=4ImyTunJBNKatweYlajIAw&ved=0CGAQ8wIwAA#
They help coolant refills so much and easy to watch the air bubble escape.
Mike Hancock
11-03-2011, 12:43 PM
Many thanks Derrick, I have tried this and some bubbles came out but I probably need a steeper gradient. It sounds like it could be the problem - pity I just replaced the radiator!
TOLMACH
11-03-2011, 02:35 PM
Level dropping is normal after you replaced the radiator.. just wait and keep adding coolant
ilikerice
11-03-2011, 03:14 PM
Yea, no prob. Take Tolmach in consideration also. Just keep driving it around with the heater on high and the bubbles will eventually makes thier way to the radiator.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.