Yaris Stanced!

[1.5]

suuuuucks man. Youll be back to modding soon.

[G-Ammo]

https://www.youtube.com/watch?v=7qn-oCKMS3A

Straight pipe!!!! :D

[SilverSquash!]

https://www.youtube.com/watch?v=7qn-oCKMS3A

Straight pipe!!!! :D

Awesome sound!
How's the throttle response after the pipe?
Were there any engine warning lights?

[G-Ammo]

Thanks! Love the sound!! :D

Eeehm the throttle response is a bit better, not much :O cuz ofthe stupid electrical gas pedal thing... but together with the injen cold air intake i felt improvement.

No warning lights whatsoever ;)

[SilverSquash!]

Thanks man! Enjoy that tone!

[TerenceCruz]

Sounds great man!

[EricGSXR]

Looks great. Cool modifications too!
I have Urban Cruiser wiperblades for a cleaner look.

Do you still have the Eibach springs for sale?

[G-Ammo]

Thanks Eric!

yes they're still for sale! I sent you a PM :)


Also!

For my next update I'm going to buy these in a few weeks probably:

http://i.ebayimg.com/00/$(KGrHqIOKi4E20Yf5Q1LBN6i,QkTq!~~_3.JPG

Looks nice! clean too :) and I might throw out the backseat though :) who knows

[framisciu]

hi man you have sell your air filter ?

[G-Ammo]

Nope :)

[TerenceCruz]

I love those seats!

[G-Ammo]

Me too... but to get them to holland would cost total of 340$ (just mailed the seller)... so I'm not going to do that :( Going to find some seats here in europe probably.
Also they wont make custom brackets for me to fit in the yaris.

[G-Ammo]

new updates in a few weeks:

''Stance'' stickers on the rims (on one spoke per rim)...
And in March im going to blind the 3 rear windows! 97% dark :D

[G-Ammo]

Alright guys... the horn has been fixed... the problem was: the steering hub was pressing the connector for the horn and airbag wires down into the steering mechanism, which resulted to be broken when we put on the steeringhub. They replaced the steering mechanism and had to drill into the steering wheel hub to make the space bigger and deeper so the connectors wouldnt get pressed together again... total price: 530 Euro's...

Almost a new set of 15'' wheels man :( jesus....

[G-Ammo]

Made some new pictures!

Got rid of the stickerbombing... added a TRD leather shift

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/1553537_10201797317947908_2063160503_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/t1/1549497_10201797318227915_401472258_n.jpg
https://scontent-b-ams.xx.fbcdn.net/hphotos-prn1/923061_10201797318627925_1015103155_n.jpg

[G-Ammo]

Cleaninggggg :D It's finally back on the rims and back scraping the ground! Wooohooo!!

Going to make more pictures when the last updates are in the mailbox, some details!

https://scontent-b-cdg.xx.fbcdn.net/hphotos-frc3/t31/1781783_10201895367999098_2122842290_o.jpg
https://scontent-b-cdg.xx.fbcdn.net/hphotos-prn2/t31/1781807_10201895368319106_2002682256_o.jpg

[WeeYari]

Winter is over for you guys. Lucky sob!

[BenDelSol]

So clean! ;)

[G-Ammo]

Nah winter isn't over for us yet... but we aren't getting any snow anymore... haven't had snow the whole f*king winter!!!

I think this could be the warmest winter ever.

I just lowered it again because I couldn't take it anymore riding on steelies, haha :D

Thanks BenDelSol!

[WeeYari]

Earliest I've been able to go summer mode was end of first week of March. Sadly, that ain't going to happen this year.

[1.5]

That pipe sounds so sick and I'm glad to see the wheels back on. Let's see that new wide setup you were talking about now!

[G-Ammo]

Well yeah... I'm not going to do that anymore man... the fender flares aren't working on the yaris :(

Apart from that... Going for the XXR531 in the future: 15x8 ET20 :) or maybe 16''.

We'll see! More pics of the wheels coming soon with the new d1 spec stuff! Just waiting for the center caps from ebay.

[1.5]

Wait you are getting new wheels or got them already? 531s in 15x8 +20 was my first wheel setup ever on this car

[G-Ammo]

Nah im not getting new wheels yet... maybe this year or next year...

the setup wanted to do was not going to work because of those fender flares that didn't fit ;(

[sclary1999]

http://www.yarisworld.com/forums/images/funkygarage/1998/1391733231953[1].jpg

15x8 +25 Avid AV12 any suggestions for coilovers?

[G-Ammo]

BC Racing, Tein... :)

[1.5]

BC Racing or Megan no Tein not low enough lol and not enough adjustability. If you have money to spend Cusco or Silk Roads are probably the best kits you can find for the Yaris/Vios

You look like G-Ammo's sedan twin tho lol

[G-Ammo]

Hahahahaha xD LOL

New updates:

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t31/1921141_10201910029165618_2145722100_o.jpg

Shit part: I only bought 1 TRD center cap... I thought they came in a set of 4.
So I ordered a full set now... will be here around 21st of feb / 2nd of march :'(
Looks dope doesn't it :D
D1 Spec long open wheel nuts
D1 Spec valve cap

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/t31/1655278_10201910029405624_910364020_o.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/t31/1553062_10201910030645655_2114538162_o.jpg

OMP steering wheel 300mm
D1 spec carbon shift knob
TRD shift coat-thingy

https://scontent-b-cdg.xx.fbcdn.net/hphotos-prn1/t31/1537730_10201910030925662_682194723_o.jpg

Just made some pictures during the day... other pictures were mostly at night so not that visable.

Hope you guys like the updates :D

[1.5]

Those caps look like they fit the color perfectly

[G-Ammo]

Yeah and it looks nicer with the red in it :D

[G-Ammo]

New idea!!!!!

Sport seats:
NRG ones... I love the look of these, clean and simple!
Hope garm has the right brackets for them (already messaged him on this)!
They are 400 - 450 euro's for 2 seats, cloth & red stitching!!

http://www.avb-sports.be/toyota/yaris/2009-2011_7/custom-interior/seats/15213/

And I'll probably throw out the back seat and replace the whole empty spot with a plank cut in the shape of the back part of the yaris (floor) and then going to use the same material like i used in my trunk on the audiosystem, to cover the wood: black velvet.

:D nice idea... when everything goes as plan.. i should have this next month!!!

[Exiwolfman]

love the wheels and the set up...do u have the part number for the TRD center wheel cups my new rims did not come with any ...those would be perfect

[1.5]

Both myself and vten went that false floor route. I got suck of no backseat though

[G-Ammo]

you missed your back seat .. or ? what do you mean? XD

[1.5]

Yup I got sick of road noise and nowhere to put crap

[G-Ammo]

Aah ok.. haha :P I'll probably get a new idea for that :)

I wont have any more road noise, because im only gonna rip out the seats :)

[G-Ammo]

Bought hte Recaro Type-R seats :) black & red stitching... going to get them this saturday and hopefully build them in the same day as well as get rid of the rear seats!!

[G-Ammo]

Few updates... and a downgrade :(

Updates!

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/1979525_10202220361443731_363755333_n.jpg

NRG long open wheel nuts & gold valve caps! These lug nuts won't let go of that coating!
Worth the 90 euro's!

I also removed the center caps... dunno... gives it a more awesome look for some reason :P

Downgrades:

I had to remove my rear 15mm spacers... I think I have driven into a puthole here in belgium (which the roads are known for) and I think the wheel and spacer got quite a big hit on them... 1 rim has a very tiny dent in it and the spacer isnt straight anymore (wheel is shaking when I put them on). Also... the screws from the spacers pushed the wheels outside, but that probably is because of the puthole... who knows!

So now my rear wheels are pretty much underneath the fenders (which i don't really like)...

https://scontent-a-ams.xx.fbcdn.net/hphotos-ash3/t1.0-9/998453_10202220362323753_1468212507_n.jpg

(my car is on an unlevel surface, so the gap isnt that big normally!! haha)

But my next plan is to buy the rims in staggered setup with keeping the front wheels and going for 15x8 ET0 in the rear!! But that has to wait 2 more months probably :(


Annnndddddd the Wedge Brackets arrived! only took 3/4 days to go from USA to Belgium... thats some priority shit right there.

https://scontent-b-ams.xx.fbcdn.net/hphotos-prn2/t1.0-9/10172822_10202243928632896_2729382016950665132_n.j pg

(i also ordered a rising sun flag, to cover the rear empty space i'm going to have when my rear seats are out!! :D)

Now some advice from you guys... which screws/bolts should I use to mount the brackets on the sliders?

Thanks!!!!

[B2FiNiTY]

looks like a good start, keep it up

[Exiwolfman]

What wheel and tire combo u have looks good ...I have same wheel nuts in green on my car very nice and light ( 40$ Canadian ) helps to have friends that get stuff cost ...I find them little long but still looking good


Sent from my iPhone using Tapatalk

[G-Ammo]

I have 15x7 ET20 Gunmetal Rota Grid - V rims with 185/45/15 nangkangs.

But my rear are going to have 15x8 ET0 Gunmetal ones with 195/45/15 toyo proxes, but that'll have to wait a few months :(|

Thanks for the replies!

[G-Ammo]

https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/t1.0-9/10177374_10202263520922691_4548424382057442705_n.j pg

Tadaaaa! :D with a little bit of pushing (the seatbelt is pushing the plastic console inside, where the e-brake is) it went it pretty well... they really feel good and i'm sitting a bit lower (oh the irony).

hope you like it!


Also... I folded down the back seat... because when we tried to take it out; there were cables running underneath it and we didn't know what they were. so we kept the back seat in.
As a finishing touch I put the rising sun flag over it! :D

[TerenceCruz]

Wooow I love those seats man

[G-Ammo]

thanks! me 2! although they are reps... the ystill look good!

but you notice because the RECARO letters aren't beautifully lined up. But hey... it's still ''just'' a yaris so... not going to pay 800 euro's for 1 seat haha

[Deadliestflea]

http://img.tapatalk.com/d/14/04/28/hyvyvamu.jpghttp://img.tapatalk.com/d/14/04/28/a6emy7yq.jpghttp://img.tapatalk.com/d/14/04/28/ma2a4eze.jpg

Diamomd race wheels +0 offsets. Still need the dpacers for the fronts :(


Sent from my iPhone using Tapatalk

[Deadliestflea]

https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/t1.0-9/10177374_10202263520922691_4548424382057442705_n.j pg

Tadaaaa! :D with a little bit of pushing (the seatbelt is pushing the plastic console inside, where the e-brake is) it went it pretty well... they really feel good and i'm sitting a bit lower (oh the irony).

hope you like it!


Also... I folded down the back seat... because when we tried to take it out; there were cables running underneath it and we didn't know what they were. so we kept the back seat in.
As a finishing touch I put the rising sun flag over it! :D


Where did you find those replicas ? And did you change the seat mounts ?


Sent from my iPhone using Tapatalk

[G-Ammo]

Oh i just saw ur answer Deadliest..

I found them on Jappower.nl (dutch site)... Yes the seat mounts are from Wedge Engineering... they make them for the Yaris! Only downside is that the seatbelt spot is more outwards into the center console which results that the plastic will bend inside (don't really care about that)...

They are Recaro Type-R seats (they are replica's!)

[G-Ammo]

Woooh! I got my full stainless steel midpipe, from cat till my exhaust! Sound is deeper now and no more leaking, finally!!!

also remounted 20mm spacers in the back. But i did find out that my rear left wheel is a liiiiiitle bit bend :( maybe its best to balance them out again.

25th of May its JAPFEST here in Holland :D so stoked!!!!


https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10365969_10202478003284616_7215103079744728945_n.j pg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10172682_10202478004004634_7257022928787256714_n.j pg

[1.5]

back in action!!! Nice!

[Deadliestflea]

Oh i just saw ur answer Deadliest..

I found them on Jappower.nl (dutch site)... Yes the seat mounts are from Wedge Engineering... they make them for the Yaris! Only downside is that the seatbelt spot is more outwards into the center console which results that the plastic will bend inside (don't really care about that)...

They are Recaro Type-R seats (they are replica's!)

Ok thanks a lot im going too look into getting those too! Do you have any experience with fender flares? Your yarisis super clean but mine is heavily offset ...but ive heard of ppl just buying 4 front scion xb fender flares to fit nicely all around .. Any thoughts? http://img.tapatalk.com/d/14/05/18/tuzu5a9y.jpghttp://img.tapatalk.com/d/14/05/18/nu3useqa.jpghttp://img.tapatalk.com/d/14/05/18/4ybetyby.jpg

[RSYaris2008]

Love to see the work put into the car and the time. Looks really clean.

[tamrat]

so this "stupid low" thing...aren't there any speed bumps where you live??? i see a many Yaris owners dropping 'em very very low....

[1.5]

what are speed bumps?

[TerenceCruz]

You have a crooked torsion beam as well right man? What did you do to even out the offset of the rear wheels?

[G-Ammo]

Deadliest:

Well I know someone here use Golf 2 GTI fender flares which fit quite nicely with some work on them (bit of welding)... but I think he already removed them.

You can maybe roll out ur stock fenders and twist them a bit to the outside. I'm not going too wide so I don't have to fuck with all that stuff.



RSYaris:

Thanks mate!!



tamrat:
you don't have to say the ''stupid'' infront of ''low''... maybe You just don't like it but you don't have to put it out there ;) everyone has his own style.

And about speedbumps... yes I live in Holland and drive mainly in belgium which the roads SUCK bigtime... and ALOT of speedbumps, buuuut you just have to plan your route before you go somewhere you don't know (using google maps mainly)... but I know how to conquer the speedbumps, so i'm not worried about speedbumps... im more worried about roads with holes in them or badly maintained ;). And then do some scraping here and there. My rear left rim as a little dent in it because of the bad roads... but it's minor.


Terence:
Crooked torsion beam? you mean like I have a bit of camber, but without any camber settings :P? if so.. then yes. my rear rims look like having 1 degree camber the less offset rims you put them on (which is pretty cool haha!).

I have 15x7 ET20 all around and use 20mm spacers in the back only ;)

[tamrat]

i didnt mean lowering is stupid. i love lowered cars, i do plan to lower when I buy a yaris (you dont lower an SUV, especially a Surf :) ). its just that i have read quite a couple of posts with "stupid low" (its in quotation marks :) ) in them. i thought it was some kinda trend. sorry if i offended anyone out there.

[G-Ammo]

Aah... ok my bad, haha I thought you really think it's stupid! no problem then.

Nah it's not really a trend, but it's another part of the ''tuning-scene'' so to say.

[G-Ammo]

Some pics after carwash :D

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10329186_10202518373413844_6380390737207755886_n.j pg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10334437_10202518374053860_3870345032628225808_n.j pg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/10360453_10202518374293866_1030185832719067586_n.j pg

[1.5]

Very Nice!

[trunkout]

Some pics after carwash :D

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10329186_10202518373413844_6380390737207755886_n.j pg


oh man those seats <---- :wub:

[dumbo0]

Did you take out the reflectors on the headlight? Looks clean!

[1.5]

didnt even notice that but it looks like youre right ^^^ unless euro spec comes with cleared headlights from factory

[G-Ammo]

Trunkouts! They're Recaro Type - R replica's... they sit very nice! everyone tells me that :D and for reps... they look awesome and are pretty good quality!


About the headlights... these are the factory ones indeed :)
I think most cars here don't have front reflectors... only rear ;)

[1.5]

Lucky thats pretty cool, so i need to look for euro spec vios headlights

[G-Ammo]

too bad the vios isnt sold here mate :) only the hatchbacks!

[1.5]

wth lol no luck

[G-Ammo]

New update for next year (or maybe this year if someone is interested in my Rota's):

http://www.civicperformanceparts.com/wp-content/uploads/2013/01/Enkei-J-Speed-Silver1.jpg

15x7 ET25 front, 15x8 ET25 rear!
185/45/15 front, 205/45/15 rear! (Falken hopefully, if not, then probably Toyo's)

U like em? :D

[1.5]

Very nice but 205/45 on an 8" is going to kill the rear, youre either going to have to have wheel gap or hella camber

[G-Ammo]

I now have 15x7 ET20 with 20mm spacer in the rear... I have 1cm between the tyre and the fender... so there's no problem at all with going on 205/45 on 8'' ;) It wouldnt even change alot!

[1.5]

I now have 15x7 ET20 with 20mm spacer in the rear... I have 1cm between the tyre and the fender... so there's no problem at all with going on 205/45 on 8'' ;) It wouldnt even change alot!

Unless you run the spacer with the 8" wheel yes you will be more sunken in than currently but I have a feeling you WILL still run the spacer, not to mention 204/45 is a fat ass tire, what tire do you run now? isnt it like 185 something?

[G-Ammo]

I know... I like fat asses.... Yeah 185 and yes... going to run the 20mm spacers :)

But I might get 195 tyres... we'll see!

[G-Ammo]

Taken on Japfest in Holland: Zandvoort Circuit

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10340125_10202549165743633_1929912795929535069_n.j pg

[trunkout]

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10340125_10202549165743633_1929912795929535069_n.j pg

IS PERFECT.

:clap::clap::clap:

[G-Ammo]

Thankkkssss!!!

[1.5]

yes do the 195, 8" +5 with a 205/45 is going to be so much rubber to fit under there lol

[G-Ammo]

Probably... ill have to think about it :D thanks for the help.

[G-Ammo]

bought one of these:

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10269639_646454395441426_4681977356951790066_n.jpg

Anti slip thingy... so u can put ur cellphone on the dash without worrying about it's going to slide off! pretty cool detail i think :) only 20 euro's

[G-Ammo]

hey 1.5

Here's a friend who did this:
15x7 ET38 FRONT - 185/45/15
15x8 ET25 REAR - 205/45/15

It has exactly the same stretch... sure you want me to do the 195??

https://scontent-a-fra.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10447498_777947615589165_6023635839418688449_n.jpg ?oh=2143e6ae1ab53561c454da620cbb070b&oe=53F3C3C5

[1.5]

Yea so you dont have to run that much wheel gap hahah

[G-Ammo]

lol XD haha

[G-Ammo]

Anyone has some nice suggestions for 16''?

As far as I know i want the Enkei J-Speeds in 15''... but if anyone know some nice 16''?

I would like to have these measures then: 16x7 (offset 10-20 front) and 16x8 (offset 0-10) in the back

[1.5]

what is your price range?

[G-Ammo]

depends on how much I like the rims? :D

[G-Ammo]

no one knows any nice 16'' rims with low offset?

[1.5]

BBS RS
Work Meister S1
work meister S1-R
Avante Garde F140
Weds Kranze Bazreia

just a few of my favorite wheels that come in 16

[G-Ammo]

Those are too expencive :( price range will then be around 700 euro's - 1200 euro's (about 900 dollars - 1400 dollars?

[febriandp]

205/45 on 8" is to meaty. go with 185/45 + 195/45.

diamond racing?

[1.5]

Those are too expencive :( price range will then be around 700 euro's - 1200 euro's (about 900 dollars - 1400 dollars?

thats why i asked lol
how about the wci cc10

[G-Ammo]

205/45 on 8" is to meaty. go with 185/45 + 195/45.

diamond racing?

Im going with 195/45 all around :) it should fit perfectly!



1.5:
Nah thats too much Euro style, and I wanted it to keep the rims jap style.

I think ill just stick with the enkei j-speeds! :D
But thanks alot for ur input!!

[1.5]

Thats a good one!

[G-Ammo]

Just bought the wheels! JapPower.nl is going to order them and hopefully they're here within 3 weeks... pretty fast, but they will do their best!

I already sold my current Rota Grid-V's! Also to a Yaris owner, so it stays in the Yaris family haha!

So hopefully I'll have a new setup in August with brand new 195 Falken tyres!!


Also my next plan is to get a exhaust manifold :) they make those for the 1.0 3 cylinder engine so it seems! and they only cost 180 euro's...

So if I have that I do have a full exhaust system on a 1.0 liter engine! My friend who has an Aygo with the same engine says that the exhaust manifold will definatly give u more HP and noticable too... so thats pretty nice!

After that I'm going to clean my front bumper en respray the rear too!

[Deadliestflea]

Done :D

next up: MI foglights :)

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/388132_10200137363450083_1500488289_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/554766_10200137364890119_1539834058_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/420705_10200137366690164_2130948802_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/408592_10200137368010197_1755383879_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc7/3657_10200137369290229_121350563_n.jpg

The camber is only on front and very minimal :D just to prevent changing the tyres every 2 months.

very clean looking yaris! love the EZlip too!

[G-Ammo]

damn those pictures were on the first day when it got its coilovers haha :D

[dumbo0]

damn those pictures were on the first day when it got its coilovers haha :D


Been through a lot and still looking bad ass dude! :)


#blaggin

IG: _martindavid

[G-Ammo]

thanks man!!! cant wait to put on the new rims... aaaaargh fucking waiting!!!!!

[1.5]

haha we're all excited

[G-Ammo]

Fucking shit guys... Enkei is giving me a hard time on the J-Speeds.... they didn't do the urgent order on them and they won't make them without one (dafuq ?) So I do have to make an urgent order, but still have to wait on their production scheme...

Buuuutttt Im also quite interested in the ''Stance Wheels'' rims...

Anyone got them? if so... are they good quality?

Im interested in the Stance Emotion 15x8 ET25 or Stance Mindset 15x8 ET25 (although the last one also looks like BBS, which I don't like because most people got those style rims)

[G-Ammo]

Also... can anyone please photoshop the Stance Emotion 15x8 ET25 (silver / polished lip) on my yaris?

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10459051_798892590161078_6885909713210608973_o.jpg

[G-Ammo]

http://www.good-win-racing.com/miata/images/items/Enkei_Black_JSpec_15x8_Miata_Wheel.jpg

These are going to be the new rims in hopefully 2 weeks!!!

Also some new updates coming up:

-Mid console going to be painted in the same color as the car
-Removing the rear windscreen wiper
-giving the nitto exhaust a matte look on the inside (ill show it on a picture... pretty nice detail!)
-If it works out: Rising sun flag pattern on the inside of the hood

[teoek9]

http://tapatalk.imageshack.com/v2/14/08/15/5765969d9f3069ce264fc27910833854.jpg

[teoek9]

http://tapatalk.imageshack.com/v2/14/08/15/474e36eaa448299855e302c183ff06aa.jpg

[teoek9]

http://tapatalk.imageshack.com/v2/14/08/15/8d4380506219dcac075d4692fcf522e3.jpg

[Freestylin]

http://www.good-win-racing.com/miata/images/items/Enkei_Black_JSpec_15x8_Miata_Wheel.jpg

These are going to be the new rims in hopefully 2 weeks!!!

Also some new updates coming up:

-Mid console going to be painted in the same color as the car
-Removing the rear windscreen wiper
-giving the nitto exhaust a matte look on the inside (ill show it on a picture... pretty nice detail!)
-If it works out: Rising sun flag pattern on the inside of the hood

Those should look good with your car.

Seems like your thread has been hi-jacked as well haha..

[G-Ammo]

Yeah that's the second time, hahaha


Thanks man! Can't wait to get them together with the gold lug nuts :D should be special :D

[G-Ammo]

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10577112_10203096596109050_3521305282388911583_n.j pg?oh=393f631eb872895897376c904e43b771&oe=54781E6C

TAMTAMTAMMMMMMMM!!!!

Hopefully wednesday/thursday Falken tyres around those beauties and then on my car!!!!

[phaznet]

Why remove the rear windshield wiper?

[G-Ammo]

Because it's cleaner and itll give it a wider ass... knowadamsayin'

hahah :)

GOING TO GET TYRES ON THE ENKEI'S TOMORROW... soooo excited!!!!!!

[G-Ammo]

Ok guys... the new setup is ready :D and mounted!!!

Tomorrow I'm going to the circuit in Venray in Holland (not going to race or anything LOL! there's a toyota & lexus meet) :) so hopefully there will be some nice pictures of the car so I can post them here!!! :D

[G-Ammo]

Some self made pictures... the car meet wasn't that succesfull, so hopefully better one next weekend!

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10609646_10203159321237139_2431302610766509473_n.j pg

https://scontent-b-fra.xx.fbcdn.net/hphotos-xap1/t1.0-9/10599462_10203159329317341_4393256469787707361_n.j pg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10649822_10203159334917481_8040182766276907090_n.j pg?oh=0849c305141b1869ff3b3d9182bb4250&oe=5477D5A1&__gda__=1417021879_5c65efc77c7f4795969f4971f3bd800 1

https://scontent-a-fra.xx.fbcdn.net/hphotos-xfa1/t1.0-9/10592921_10203159339957607_8692343900615016781_n.j pg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10592988_10203159323837204_653251384418942652_n.jp g

[phaznet]

Love the plywood for the quarter inch clearance you need getting in that garage!

[G-Ammo]

Hahahah yep! me and my dad needed to redo that whole lane until the road... I have to do a small downhill at the end haha :P sucks, but I have to live with it!

[TerenceCruz]

How did you delete the rear wiper? Wasnt there something sticking out when you took the wiper off?

[why?]

How did you delete the rear wiper? Wasnt there something sticking out when you took the wiper off?

It is really easy, takes only about ten minutes. You can actually take the entire motor out. Nothing but a small hole, which he covered with that shiny thing.

[G-Ammo]

Indeed like why? says :)

I took the motor out, only left in the wiring :) then I just sealed it with a plastic button and painted it the color of the car. Behind the button there's this rubbery thingy that will seal the hole from inside the trunk (so no water gets in!).

[G-Ammo]

Well I have a smalle problem with the rims... the paint isn't good... the line between the black of the rims and where the polished part starts, isn't straight; so it looks like my wheel is wiggling :(

I am now talking to my Enkei dealer and they're trying to sort everything out with Enkei themselves...

Hope for the best !

[ezhacker1]

I havent sourced a plug for the wiper. So far i just inverted the rubber grommet but it lives a small hole (it hasnt rained here forever so no worries yet..)

[TerenceCruz]

Nice, thanks for the help guys. I'll get to this asap.

[eiriksmil]

G-Ammo this Mk2 is dope.. Giving me bad ideas :) Flying the flag for the euro inspired Japanese car community..!

[G-Ammo]

Thanks eiriksmil!


Ok guys newsupdate:

So Enkei don't want to compensate for the costs to fix the paint on the rims...
So that sucks, because they say that you won't see the problem when putting on normal size tyres on the rim and that every Enkei wheeltype comes with different finishing.

Gladly Showoff Imports want to compensate 50% of the costs to fix the wheels and repaint the rims even though they lose money on it. So i took that offer and hopefully the wheels will be fixed next week!

[G-Ammo]

Enkei's are fixed :) 3 weren't even straight... but all is good now ;)


New updates this week:

-Brembo brake discs (stock look though) with Textar brake pads.
-Going to paint the brake caliper gold with raidhp brake caliper kit!
-Back seat is out! going to fix some details to it with the rising sun flags, but need to think about it how to do that.
-Going to lower the back a bit more, so I need shorter springs for that, going to check out which ones I need for the BC Racing BR-RN series I have.

Photo's coming probably next week!



Btw, anyone knows which shorter springs I need to drop something about 1 or 2 cm in the rear?

[ezhacker1]

What spring rates do you have now? Im running 6inch 8ks all around. My Cuscos are maxed out low on the shocks/struts, i couldnt go any lower without risking blowing em out. These came from manufacture with 7inch 4k.

[G-Ammo]

I have no idea man... Running BC Racing set... front = 2,5cm left on the screw and rear is on its lowest + everything is set on tightest as it can be :)

[G-Ammo]

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10339599_10203336774873369_4401206645877151308_n.j pg?oh=d4289140366f3805974455be9a04db81&oe=54B51968&__gda__=1422335452_039f4eb27507ccdf3d9b08ca01ccb06 5

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10599449_10203336775473384_1009771248143222134_n.j pg?oh=661c527ae63722387d1639eb78e47fba&oe=5489CBBA&__gda__=1418067439_d0e5216de35c5e03ab13414692de0e5 2

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10609421_10203315458540474_7234115782188873529_n.j pg?oh=85aa7ca133b1542e66cb040f23fff54d&oe=54CBE842&__gda__=1418341671_621689b3b772c3c6cb8e1a793e6f7d6 d

[coheed]

Those seats look awesome!

[G-Ammo]

Thanks! Type R Replica seats... but im going to change them for some legit OMP seats :) my bro just got 2 for his MR2... those seats are amazing and definatly not expencive!

These Type R reps aren't that firm to be honest :)

[Will-I-Am]

Just a word of advice, DONT MOUNT YOUR SEATBELTS THAT WAY!!!!!!

the angle that they come down is really dangerous when you are in an accident. Because they run down very steep, when you have an impact, the seatbelts will jerk you down instead of keeping you in your seat. This will create massive neck & shoulder injuries.

Racing harnesses should always be in a much more slope angle (90 degrees would be perfect)

i have mine attached to the rollcage like this

http://farm9.staticflickr.com/8369/8596439254_f29dc552bc_b.jpg

http://farm9.staticflickr.com/8523/8595330887_72d699969e_b.jpg

[ilikerice]

What he said ^^^^^^^

get a harness bar asap or use your OEM seat belts in the mean time

[G-Ammo]

Ok thanks guys... I'll get one ASAP!

[G-Ammo]

Can I attach the seatbelts to the rear strut bar?

I think I found a harness bar from Cipher... at Andy's Autosport's website and I emailed him on what to do and if its a good one etc :)

So no worries guys, I'm trying to buy legit stuff from now on and do everything as right as possible within my budget!

Because in the future, I want a 4AGE 16 or 20v in it, So all the bars and seatbelts will come in handy then :)

[ezhacker1]

Mounting it to the rear strut bar would be bad. Yours is just bolted to the strut tops.

I have harness that bolts to OEM seat belt chassis location. Strong as OEM.

[G-Ammo]

I see... Ok.

I went to showoff import for an universal harness bar, BUT... it didn't fit :(

Tomorrow I can go to a tuning shop and they will probably make a custom made one for me!

So hopefully they have the material to do it that day and can start right away :)

[G-Ammo]

Went to Biesheuvel Autosport and this is what they made for me:

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10647035_10203349243025065_1543454846582896613_n.j pg?oh=13f569567240b5b3df499c600cb6c3d5&oe=5488EF88&__gda__=1421033886_a1ae3c930796e51da1782de747dc1ef 9

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10606560_10203349243425075_1286117635743315339_n.j pg?oh=5b6778d9de02642532c649660ba3e06e&oe=54B1C997&__gda__=1421251457_f07d59d5923ea43d9d709d8950e5bd9 1

https://scontent-a-ams.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/1601297_10203349243865086_7580051141530453361_n.jp g?oh=d5250da587bf9fa739fd1f69a5aa9ec0&oe=54CB22CA

[aspro]

Went to Biesheuvel Autosport and this is what they made for me:

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10647035_10203349243025065_1543454846582896613_n.j pg?oh=13f569567240b5b3df499c600cb6c3d5&oe=5488EF88&__gda__=1421033886_a1ae3c930796e51da1782de747dc1ef 9

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10606560_10203349243425075_1286117635743315339_n.j pg?oh=5b6778d9de02642532c649660ba3e06e&oe=54B1C997&__gda__=1421251457_f07d59d5923ea43d9d709d8950e5bd9 1

https://scontent-a-ams.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/1601297_10203349243865086_7580051141530453361_n.jp g?oh=d5250da587bf9fa739fd1f69a5aa9ec0&oe=54CB22CA

Oh damn that looks awesome. Any difference in feel of the car now that everything has been bolted together? Your car is really coming together man, good work and keep the pictures coming

[G-Ammo]

Its stiffer indeed :D felt an improvement!

Going to paint black the rear strut bar from ultra racing too :)

Some people even said I should paint them both darker gold... because my lug nuts and brake calipers are gold :P but i think that will be too much.

[aspro]

Its stiffer indeed :D felt an improvement!

Going to paint black the rear strut bar from ultra racing too :)

Some people even said I should paint them both darker gold... because my lug nuts and brake calipers are gold :P but i think that will be too much.

I think you should Colour match it to the paint colour of the car. It would be like your turning the car inside out. And that the outside metal and paint flows into the car. If you can get what I'm saying.

[G-Ammo]

I know, but the shit part is... I can't buy my car colour in shops anymore, because Toyota don't make them anymore. So that sucks, but most people agree actually with letting the rear strut bar in white, because Ultra Racing IS white :)... and I'm scared to f*ck up the rear bar with painting it.

[ezhacker1]

Is it me, or is the harness bar bolts seem like its weak point. I dont have experience with a bar, but usually its wrapped around the bar and then bolted to a hard point.

Im always jealous of those that can HAVE a harness bar, with a 2 door, my routine passengers cant get in HAHA, not to mention i have only 1 race seat, cuz not all passengers are my size LOL.

[aspro]

I second the jealousy. My goalie equipment bag takes up too much space in the back (literally the whole back end with the seats down) for me to have a harness bar let alone a strut tower bar.

[G-Ammo]

haha trust me... I've been pulling those seatbelts... they won't move an inch! these guys are experienced in putting in roll cages for rally cars so ;)

[G-Ammo]

This week hopefuly a professional video being uploaded of my Yaris and my mate's alfa romeo Mito turbo

[Betrivent]

Sweet! ^

[G-Ammo]

Haven't been posting in a while... Few small updates!
- OMP racing pedals (LOL IN A 1.0 LOLOLOLOL, but it looks cool so idc :D)
- Square license plate, because almost everyone drives a straight one and I wanna stand out :D
- Shut off the airbag icon on the dash!

https://scontent-a-ams.xx.fbcdn.net/hphotos-xap1/v/l/t1.0-9/10370438_10203759411599023_8921740604859623709_n.j pg?oh=2c68b6d199476e17834f0bbc4b1d0afb&oe=551D9CF2

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10450444_10203733360707767_4968081757869762186_n.j pg?oh=bdb2deae8225f488fafe9530312bf7f0&oe=55001479&__gda__=1425958662_59a0e68423bd656c73ec487d849b500 6


I really like the last picture! It was made at Wangan Warrior's meet (that's one of the best known Japanese Car community in West-Europe, maybe even whole of Europe!)

[G-Ammo]

Wintermode!!! I call it: RALLYE MODE :D (added mudflaps for the looks and to prevent salt getting on the paint if it's going to snow whatever... :D)

https://scontent-a-ams.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1395812_10203847761767722_3247642516454882701_n.jp g?oh=24d0c92641d9654d674c655554e746c4&oe=54FE77E8

[G-Ammo]

Lot of pictures aren't working anymore, so I'll just post the most recent pictures again including the modlist... Have fun :D!!

Modlist:
- Toyota Motorsport (original!) rear spoiler.
- BC Racing Coilovers
- Enkei J-Speed 15x8 ET25 rondom with 195/45/15 Falken ZIEX,
- 20mm spacers REAR
- NRG gold long open wheel nuts
- Gold valve caps
- Easy-Lip front lip.
- Yellow foglights with Yellow LED's
- Hella Supertone Horns
- Black emblems
- JBL subwoofer, JBL speakers with Autotek & Excalibur amplifiers, stock front pioneer speakers.
- Custom made trunk floor to fit the speakers (made by my brother).
- Ultra Racing rear strutt bar
- Recaro Type-R Replica sport seats with Wedge Engineering brackets (custom made)
- D1 Spec carbon shiftknob and TRD leather red stitching shiftcoat
- OMP Corsica Suede steeringwheel
- OMP racing pedal set
- Navigation system 7'' 640x480 - DVD, Radio, AUX, Ipod, GPS, TV (didn't bought the TV option though!), USB, MICRO SD. Perfect fitted for 2009 Yaris.
- TTE (Toyota Team Europe) door steps.
- Carbon small antenna
- Carbon mirror caps
- Custom front grill
- BVK Cold Air Intake
- Straight stainless steel midpipe
- Nitto Axle Back Exhaust
- Gold painted front Brake Calipers
- Custom made seatbelt harness bars, mayde by Biesheuvel Autosport
- Sparco 4 point seatbelts
- Brembo brakes & Textar Brakepads


FUTURE PLANS:
- OMP Racing seats

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10450444_10203733360707767_4968081757869762186_n.j pg?oh=c253ee316e78340518f8d1e312cdb32e&oe=554F2E79&__gda__=1431142662_dce7625796bc0c625b7f28bb5f3f2b6 c

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10922829_10204324732011680_8019836036824040655_n.j pg?oh=2e05ebe8fe19575eee253ca6f0f4831e&oe=55507AE7&__gda__=1432524115_824bef88b9ca6df66ad3180098cf320 d

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10609421_10203315458540474_7234115782188873529_n.j pg?oh=e4517d9d611614e6d1f19445a51018e4&oe=5591A942&__gda__=1432167997_647dcd2871994ab05bd990e0211c9f4 3

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/v/t1.0-9/10647035_10203349243025065_1543454846582896613_n.j pg?oh=91088049e79dd62c35f5f5a59ad43099&oe=554EB088&__gda__=1435529327_f99fc44961528ac5eb9730c3c2f4906 4

https://scontent-a-fra.xx.fbcdn.net/hphotos-prn1/v/t1.0-9/1601297_10203349243865086_7580051141530453361_n.jp g?oh=fd80724c78d053803b1b3cdac443227d&oe=5590E3CA

https://scontent-a-fra.xx.fbcdn.net/hphotos-xfa1/v/l/t1.0-9/10370438_10203759411599023_8921740604859623709_n.j pg?oh=efe9ad1fed1b9e389da845f2b3cee81a&oe=559443F2

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10959303_10204324693250711_8713345623322710620_n.j pg?oh=d98b25efb3a4a95512dcb4a78d752d81&oe=5590A833&__gda__=1431003941_825af4921c5b8e5ccee0a6ce8298572 4

[TerenceCruz]

Since you changed the steering wheel and the SRS light used to stay on, does that mean all the other bags are disabled as well? Car looks amazing as usual!

[G-Ammo]

Thanks man :D

No i dont think they're all disabled... not sure though XD but I used a resistance thingy so the computer thinks there's an airbag in my steering wheel. But for our yearly checkup, they only look if any warning lights are on on the dash, if not, everything is ok :)

[WorkTL]

Nice. I was on the fence between Sparco and OMP, love your set up.

[TerenceCruz]

Thanks man :D

No i dont think they're all disabled... not sure though XD but I used a resistance thingy so the computer thinks there's an airbag in my steering wheel. But for our yearly checkup, they only look if any warning lights are on on the dash, if not, everything is ok :)

Where'd you get that resistance thingy? Haha I want to get an airbag override relay or whatever it's called if I happen to get a quick release set up.

[rye7jen]

TerenceCruz, you can use a resistor to bypass the airbag warning light. They look something like this:

54975
54976
54977

Once done, insert the resistors to the airbag terminals and secure them.

54978


HIH

Note: Google the right ohm for the resistors cause I forgot mine. :bellyroll:

[TerenceCruz]

TerenceCruz, you can use a resistor to bypass the airbag warning light. They look something like this:

54975
54976
54977

Once done, insert the resistors to the airbag terminals and secure them.

54978


HIH

Note: Google the right ohm for the resistors cause I forgot mine. :bellyroll:

Ahh gotcha, thank you for that!

[rye7jen]

Ahh gotcha, thank you for that!

:wink:

[island_Vitz]

Absolutely loving your Vitz man! Just wish you would use a different photo upload service. Most of ur pic links are dead