Yaris Stanced!

[G-Ammo]

Hey guys!

I'm going for the stanced look on my yaris (probably flush!)

here are some pics of my new rims that I mounted yesterday!!

In the future I'll be putting on the BC Racing coilovers with camber ofc :D

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/21760_4762349009904_2022618518_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc6/253107_4762354450040_1617254140_n.jpg

Rims: Rota Grid-V Gunmetal (15x7 ET20)

Better photo's will be put on here when the new coilovers are mounted! :D

Can't wait!

Few future plans:
-Wind visors
- Hella Supertones
- (maaayyybeeeeee) a supercharger (ROTREX) for the 1KR-FE

[1.5]

That came out verry nice man... We have been waiting for these lol now the coilovers

[SilverSquash!]

Sweet Action Shots! need to go moer low bro!

[InfamousDragon]

Yea I'm slammed right now and about to go lower. But I am getting my rims later cause imma Anodize them before I throw them on. Not running coilovers either just spring

[G-Ammo]

Yeah when I get my money back from a cancelled order, I will be buying the coilovers right away! so hopefully in a few weeks itll be looow&sloooow!! :D

[1.5]

Join the club lol

[vten]

Low but not slow is better :)

[G-Ammo]

I have a 1.0 3 cylinder engine... 68HP... so I don't really have a choice, haha :)

But maybe a supercharger in the future :)

[InfamousDragon]

Lol yea well I'm over 115 right now and still upgrading but I'm going for slammed. With a fatty low and slow sticker soon as I get it made. I love low cars even if its a yaris muahahahahaha

[wildmongoose26]

So Infamous....your saying your making 115hp correct?
What other N/A mods do you have to get up to 115hp? Since this
https://www.dropbox.com/s/r87ss1zut3lcngw/2013-02-21%2011.58.14.jpg is your intake.

Also, you've been here for hardly 3 days and up to 27 posts and you've already jumped on someone else's thread now 2 times about how "slammed you are", etc. Yet you havent posted a picture of your actual car and your current suspension, whee/tire combo.
Please school us in all that you have done for that "low and slow" you got goin on.

[1.5]

Lol yea well I'm over 115 right now and still upgrading but I'm going for slammed. With a fatty low and slow sticker soon as I get it made. I love low cars even if its a yaris muahahahahaha


Hahahahaha... sticker

[G-Ammo]

yeah show me some pics man :)

[why?]

Low but not slow is better :)

oh come now, you know slow and low is better. https://www.youtube.com/watch?v=kwenqnZnX2g

[vten]

Naah... Still hold my ground ... Low and fast is good :)

So g-ammo, get the add on and boost , you will love it

[G-Ammo]

Alright guys... tomorrow my new equipment will be installed:
Red wheelnuts & removing the hubcaps.
Red ''Low&Slow'' sticker on front windscreen.
Red Hella Supertones
Ez Lip for the front bumper.

And on saturday the grand finale:
BC Racing coilovers
Camber front & back!

STOCKED!!!!

More pics coming soon and I might make a nice video too when it's all done!!!!

[G-Ammo]

Done :D

next up: MI foglights :)

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/388132_10200137363450083_1500488289_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/554766_10200137364890119_1539834058_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/420705_10200137366690164_2130948802_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/408592_10200137368010197_1755383879_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc7/3657_10200137369290229_121350563_n.jpg

The camber is only on front and very minimal :D just to prevent changing the tyres every 2 months.

[TerenceCruz]

Looks amazing man!

[G-Ammo]

Thanks :D

[kou]

How much rub in the front? What size tires?

[B2FiNiTY]

stanced y0

[verongome]

Just beautiful

[1.5]

woahhhh we got another slam and poke member. Nice job.

[G-Ammo]

@kou i have no rub :) I have 185/45/15 on 15x7 ET25 rims :)

Thanks all for the nice comments!!

[Yaris1987]

Hmmm how can this be Stanced? There is no fitment at all and no tucking, also your on 15x7s, just curious? The car is lowered and isn't even flush.... Lowered and Stanced/fitted are very different

[yarisugi]

^So what?

[1.5]

it looks like there is a tiny bit of poke to me and being flush to fenders is still considered stanced/fitted.

[SilverSquash!]

Car is looking great dude! Quick Q...what exhaust system are you using? looks really good

[G-Ammo]

I have the Nitto Axle Back from MI :D that's all ;) no system at all (not yet, who knows)...

Some new pics!!!

Right before we went to Japanese Auto Festival with my brother (he has a Toyota Aygo)
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/954652_10200284225441541_1277900611_n.jpg

Picture @ Japanese Auto Festival in Europe yesterday!
I had alot of people looking at my car... even pictures were taken!!!! So happy! :D
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/965340_10200284213801250_2087722954_o.jpg

And of course... I couldn't handle myself:
Got some tubes (finally) and fitted a new K&N filter.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/971175_10200278867587598_453795298_n.jpg


Now i'm waiting for the Foglights from MI and I also bought new speakers on JAF for the rear passengers!

[1.5]

Needs moa low... too much gap

[G-Ammo]

can't go any lower... we have alot of speedbumps and bumpy roads here. This is the lowest I can go and is still drivable with 4 people in the car.

Next year I'll be getting 16'' wheels and go lower to have minimum gap ;) For now... this is getting enough attention already, haha! :D

[1.5]

lol thats why your car has an oil pan consider it like an undercarriage bumper lol

[SilverSquash!]

Dude your car looks SWEET 'N LOW!
I'm aspiring for mine to be like yours to be honest...
How's the fuel economy after the exhaust (looks tops) and K&N cone filter?
Sorry to bug you with Q's dude

[G-Ammo]

Nothing has changed at all... I used to drive quite fast / rough... but after it's lowered, you'll HAVE to slow down and take your time. I can still drive almost 650 KM's on one tank. And it's still going up.

I do accelerate quite quickly just to keep the engine in top form, although its an 1.0 3 cylinder. Because of that I could keep up with a 1.3 4 cylinder without any trouble ;)

And they don't bug me! I want to answer as much questions as possible :D cause I also learn from you guys alot!!

If you guys have any more ideas for my car, lemme know ;)

[SilverSquash!]

Thanks for the help! time to get an axle-back done:D by the way, was it a mission removing the airbox?

[G-Ammo]

Nah... just some clicking stuff and I think 1 screw or 2 or something... not sure anymore (long time ago when I got it off) :) it's a piece of cake :D It's hard to cause any damage on that thing.

[SilverSquash!]

Nah... just some clicking stuff and I think 1 screw or 2 or something... not sure anymore (long time ago when I got it off) :) it's a piece of cake :D It's hard to cause any damage on that thing.

Thanks for the help dude:thumbsup:
Good luck with the future mods:clap:

[G-Ammo]

The MI fog lights are installed :D Looks awesome with the 2500k's!!!

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/941780_10200306019186371_882834511_n.jpg

In RL its more ''jdm yellowish''... blackberry sucks at pics, haha :D


Oh yeah: new idea's:

- Full navigation system (with touchscreen, tv, and all that other shit + sound system (subwoofer, new speakers etc)).
http://www.navaudio.nl/product_images/g/183/toyota__54074_zoom.jpg
- Tinted windows (rears only).

So yeah... lots of money again :'(

[yaris1F8]

Nice bro... where did you get your front lip ??

[G-Ammo]

thank you... I got it from ebay ;) Called: EZ Lip... that thing is indestructable... I only put 5 screws in it so it really stays there for a long time... I almost hit everything with it and it's still going strong!! Only have to cut it a bit in the middle because im pretty low to the ground :D

[G-Ammo]

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/261709_10200307038691858_1026147592_n.jpg

:D

[Yaris Tuner]

Where did you get your headlights?

Looking good mate!

Cheers


Yaris Tuner

[G-Ammo]

I bought them from someone who didnt want them anymore (they were new)... bought them together with a rear strut bar (also new) for only 120 euro's... cheeeaaappp!!

You can buy these headlights on Ebay too... called Yaris Angel Eyes ;) just search google... you'll find them! :D

Thanks!


https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/602386_10200369264727470_1165375162_n.jpg

New radio = in!! Also got nice rear 550 watt speakers with an amp. Sound is AMAZING!!

Shame the color of the radio is a bit different from the rest.. but I'll be fixing that later ;)

[G-Ammo]

New idea:

Rear wheels are going to be 15x8 (ET0) with 195 tires... :3 gonna be awesome... but that'll be in a few months :D I don't have to roll anything because my rear is higher than my front ;) so my tires wont hit anything

[farhanhar]

give chamber also in the rear wheels, it will make your car looks more stance :D
but overall, your car is good looking :D

[G-Ammo]

Yes I wanted to do that... but I have a solid rear axle appearantly :(... I do have Camber shims, but I don't have the balls to install them And would like to hand them over to someone who has more experience in installing those shims on the back...

still searching around for someone

[1.5]

I'm running -5 degree shims in the rear and Mr miles runs -3 degrees. We both purçhased from the same vendor. Its so easy to install and takes no skill lol

[G-Ammo]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/q71/s720x720/969322_10200548358484702_1540389946_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/q71/s720x720/992797_10200548358604705_1117658948_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/q80/s720x720/1045140_10200548358564704_340743474_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/1044152_10200543146714411_2049944240_n.jpg

Finally some good pics from a meeting last sunday @ Antwerp belgium ;) Soon more meetings!!!

Hope you guys like some of these pics ;)

Last pic is my yaris and my lil bro's Aygo! :D

[1.5]

Nice pics, the last is my favorite. The wheel gap in the back makes your front wheels look larger diameter lol close ittttttt!!!! lol

[G-Ammo]

Haha no mate... I'm going to keep it that way :) I mostly have alot of people in the back so that gap is some serious shit if i dont want to destroy my wheels. I'm going to fill it up with spacers & camber... and next year with a staggered setup and probably 16'' wheels ;)

[1.5]

there you go lol fender work and camber lol

[monchito18]

You call that stance?

http://i.imgur.com/3O2dgaG.jpg
http://i.imgur.com/peG6XMY.jpg
http://i.imgur.com/1bmqPU8.jpg
http://i.imgur.com/F6gds5Z.jpg
http://i.imgur.com/gfW7dzV.jpg

[1.5]

not everyone has to run those specs ^^^

I could say the same thing about my car vs those cars but no need, his car still is fitted

[cali yaris]

so, monchito, which of those is your car?

[yarisugi]

The last one in his sig.
Threadjack stock stanced.

[TerenceCruz]

so, monchito, which of those is your car?

+ 1

[TerenceCruz]

Your car is looking great, man!

[Kaotic Lazagna]

No need to bash other people's cars. We all have different tastes and different situations (roads, car load, etc).

[SilverSquash!]

Car is looking tops G!

[G-Ammo]

Thanks guys! And about monchito... I drive on roads in Belgium... they are one of the worst in whole europe. Having a lowered care like that here means you have the balls to almost destroy your car. But because the yaris is quite small... i can get over the speedbumps without going in an angle :) but yeah... I do have my own planned route :)

Thats why it's not hella flushed like the pics you showed, because that would be impossible here...

[monchito18]

Mine is the one on the signature, roads in Puerto Rico are horrible but that's a risk we take :)
now don't take my comment as negative, Your Yaris looks good no doubt about that just that I have seen better stance that is all.

[yarisugi]

Threadjacking G-Ammo with your comment and pics is :thumbdown:
Nice cars you posted but didn't you start your thread with those cars already?
Let's keep this one a G-Ammo thread.

[G-Ammo]

Yes ofcourse... I have also seen better stance, obviously... but the money is the key element to that in which I dont have (that much < lol)

Next year im going for a staggered setup, but for now Im going to use rear spacers and hopefully some camber for the rear. That will also fill up alot of gap on the rear.

Im just posting this for people who want to get ideas for their car and of course that people can give me some feedback on what to do next... ;)

[cali yaris]

now don't take my comment as negative, Your Yaris looks good no doubt about that just that I have seen better stance that is all.

That's negative. :laugh:

[zaco2356]

i want some rims that looks flush but i dont want to do camber and spacer, what size and offset will be the right one for yaris sedan ???

[1.5]

there is not really a given number, it depends on drop height, fender work, tire size, and withd/offset can fit differently depending on wheel diameter too

[G-Ammo]

Zaco... Rota drift series are nice for flush...or XXR's...

But 1.5 is right ;) depends on all those things he mentioned!

[1.5]

those companies make it soo easy to fit out most cars

[G-Ammo]

yeah :P


Update: this weekend im going to place my original headlights back with US modules... to give it a more cleaner look ;) Ill post some pics when its done :D

[Kaotic Lazagna]

i want some rims that looks flush but i dont want to do camber and spacer, what size and offset will be the right one for yaris sedan ???

17x8, ET30 all around. You'll have to roll your rear fenders and trim some of the front fender liner. 205/40/17 tires should be enough stretch to clear at that point, and you won't need to run additional negative camber or spacers.

[Kaotic Lazagna]

yeah :P


Update: this weekend im going to place my original headlights back with US modules... to give it a more cleaner look ;) Ill post some pics when its done :D

US modules???

[G-Ammo]

Well yeah... they call it US Modules over here in Europe... its driving with your indicators on :D

[Kaotic Lazagna]

The parking lights? Sorry, a bit confused.

[G-Ammo]

this!
http://www.avao.nl/wp-content/uploads/2010/11/US-blinker-modules.jpg

[1.5]

ahh DRL aka Daytime Running Lights

[G-Ammo]

Aah ok :D ah well we call them US modules because non european car / japanese car got them here so ;) but I think itll look very awesome :D will post pics when everything is installed!

[1.5]

lol yeah it should be nice

[G-Ammo]

Just replaced my original headlight units. Now I'm waiting for the amber yellow indicator lights and the US Modules/Daytime Rnning Lights :D

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1069219_10200621246026845_325275454_n.jpg

Need to get used to it again, haha!

[mr_miles]

Just replaced my original headlight units. Now I'm waiting for the amber yellow indicator lights and the US Modules/Daytime Rnning Lights :D

Do you need the daytime running light module? I have one I'll never use again lol. (edit) Derp, Just realised I missed the previous posts lol. Nevermind :D

[G-Ammo]

Hey guys! Had 2 amazing car meetings last weekend and guess what...

I WON A PRIZE!

I got Top 30 Show & Shine award from the last meeting on sunday (over 300 cars)!

So happy!! Here are some shots from those meetings :D Hope you like them!

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/970629_10200665068482379_831017869_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/149305_10201676864113399_363318107_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/548898_10200664694313025_1826422860_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/547679_10200666331033942_197922001_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/992828_10200666331113944_1539137505_n.jpg

I just ordered 15mm spacers for the back wheels... the ET 20 is just not enough to let them stick out a bit, just like in the front :(. Hope they'll arrive this week!!

I also decided that (if it is financially possible) I'm going to do performance tuning next year! I might get that supercharger for the 1.0 3 cylindre engine and a full exhaust system! But that's for then ;)

[1.5]

LOl I told you man just a little wider in the rear. Its looking good though and congrats on the prizes.

[TerenceCruz]

Congrats on the prizes man! Definitely well deserved!

[G-Ammo]

thank you! :D alot more meetings coming up in august ;) Ill post more pics :D

[G-Ammo]

I put on a new lip.. and tinted the foglights yellow too :)

Now im still waiting for spacers for the rear axle!!

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/1096963_341216236009275_821382369_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1116256_341216246009274_416815153_o.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/1085216_341216302675935_2012900022_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/1078806_341216356009263_1621610460_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1116211_341216376009261_2144697569_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1085216_341217122675853_963982027_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1085216_341217122675853_963982027_o.jpg

[yarisugi]

Those are some gigantic photos.
I need to buy a bigger monitor.

[TerenceCruz]

Soooo nice man! *Drools* Definitely some inspiration for my LB! Haha

[G-Ammo]

Hah sorry yarisugi :P but then u can look at my car on a 1:1 scale :D hah.

Terence: thank you man!! and yes indeed :D I hope itll do the same for others too :D!

[1.5]

Duuuuude...

-select file
-right click
-scroll to "open with"
-select "paint"
-use resize feature

pleasseeeee lol

What is the hatch parked next to you in the last two pics?

[yarisugi]

^The Toyota Aygo. One of the many vehicle not available in USA. Discrimination!

[1.5]

its a cooler sportier looking Yaris lol

[TerenceCruz]

its a cooler sportier looking Yaris lol

+ 1. That car is pretty sweet. Lol.

[G-Ammo]

Haha yeah its the Aygo ;) its my bro's :D

They look sportier indeed... but are ''less'' car than the yaris ;) you can still see the metalwork on the inside... and the doors are pretty small too. :D I had an aygo first too... but was too small for me and I wanted more care for the money ;)

[mr_miles]

I want an Aygo so bad. I could buy one...I just don't know how to title it legally. Lol.....

[1.5]

I like the jazz and brio... those micro economy JDM cars are always fun

[G-Ammo]

15mm spacers are installed on ET20 rims... So actually... I have ET5 in the back...
Mehehehehehe!

My coilovers are now on the toughest setting... so its a little bouncing ball now :D

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/969099_10200713021001162_663437951_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1009821_10200713021041163_533494620_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/998737_10200713020961161_1657350792_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1009817_10200713021601177_2056572625_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/1001219_10200713021801182_1318079737_n.jpg

[1.5]

Hell yeah man that looks so much better.

[TerenceCruz]

Hell yeah man that looks so much better.

+1 It looks amazing man! :drool:

[SilverSquash!]

Looks Great dude!

[G-Ammo]

thank you all!!

I think its almost done... just going to do some minor details :)
nicer gearshift knob and some new door scuffs.

Cheap ass stuff but they do the trick :)

[G-Ammo]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/1097702_10200744367304800_866228704_o.jpg

[TerenceCruz]

Maaan I love these pictures, lol.

[G-Ammo]

Ill keep posting :D there are still more car meetings to come here !!

I just bought a new shifter knob :D D1 Spec #1.

going to make the interior look pretty as well with some carbon accessories!

[1.5]

Great shot but please bro practice some resizing. Im getting Carpel Tunnel Syndrome from having to scroll so much.

[ilikerice]

Sweet cars. Love that Aygo.

But I think you should paint that part of the yaris black like they Aygo has. It would stand out a bit more I think. I like the idea.

Just a suggestion.

Car looks good though

[1.5]

I like that idea too ^^^

Those bumper guards painted black remind me of the peugots

[G-Ammo]

No it won't :) I tried it already with microsoft paint (ftw)
It looks terrible and then it really does look more like a grannies car.
The Aygo has a much darker color so it suits that much better.

But still thx for the tip ;) Keep em coming!

[ilikerice]

I don't understand. Your side bumper is dark, and you could paint match it to that or the fog light housing is like a flat black. I think it would help the bumper stand out. It just looks like it will flow well.

[TerenceCruz]

^^ I agree. I think that would look pretty nice!

[ilikerice]

Sorry. I re-read what I wrote and see that it sounds like I am pushing it. It is your car. If you did a photo shop of it and didn't like it. By all means, don't do it. But It looks good on the Aygo matching the other parts. Its just the body lines and the shape of the fog light housing and the shape of your side door guards are very similar and it just seems out of place as is.

[G-Ammo]

Yeah but here in western europe... if you see a car with black accents or those grey things. it mostly means that you cant drive and u need those spots to be black because those are the first things you're gonna hit :') especially on a yaris. Just on the aygo it looks good. but it's really not my thing :)

I personally hate that grey thing on the side... but can't change it... or I'll have to make it the same color as my bodypaint.

[G-Ammo]

What about this guys....

Full carbon interior? :D

http://www.carid.com/2006-toyota-yaris-wood-grain-dash-kits/item-258211.html

Also installed the D1 Spec #1 shiftknob (real carbon). google that shit.. it's awesome.

[Jochen]

I personally hate that grey thing on the side... but can't change it... or I'll have to make it the same color as my bodypaint.

Just get rid of them. Or at least paint them, but I should go for option 1. It would be a much cleaner look.

[ilikerice]

What about this guys....

Full carbon interior? :D

http://www.carid.com/2006-toyota-yaris-wood-grain-dash-kits/item-258211.html

Also installed the D1 Spec #1 shiftknob (real carbon). google that shit.. it's awesome.

Don't do that stick on Carbon Fiber look. It looks so tacky.

[jpmck03]

Been following this thread for a while...

First off, love the ride! Nice to see another modded Meteorite Metallic 3-door here! Everything looks so clean, and
:coolpics:

...I personally hate that grey thing on the side... but can't change it...

I'm 99.99% positive that you can just take them off, they should be just taped on... so you could change it? :thumbsup:

Don't do that stick on Carbon Fiber look. It looks so tacky.

+1

[G-Ammo]

Thanks for the advice :)

carbon: I might reconsider it indeed. I was afraid It would look a bit off too on the interior.

grey thing (< lol): I think I'll ask my local dealer if it really is only taped on. Because I see some cars who got those things off (from an accident for example) and it was ''mounted'' IN the car paint... so you got this shit ugly dent with screws in them.

I really hope it's just taped on so i can try and pull it off...

[G-Ammo]

Oh and its not meteorite :D

It's ''Silver blue''. At least that was written in the brochure thingy

[jpmck03]

Oh and its not meteorite :D

It's ''Silver blue''. At least that was written in the brochure thingy

Well it looks like it's got "meteorite metallic" paint from over here in America! :cool:

I'm sure they call it that over there, but it looks the same to me. :thumbsup:

[Jochen]

Well it looks like it's got "meteorite metallic" paint from over here in America! :cool:

I'm sure they call it that over there, but it looks the same to me. :thumbsup:

It's probably the same. Mine is called "Lunar Silver" in Belgium.

[evo165]

Bro, what camber are you running on the front?

I am interested in the exact rims set up... Running lower springs, not as low as yours. ;)

Using 195/55/15... I am afraid it will rub? Does it "pop out" outside the line of your fender?

The pics doesn't show clear enough...

[G-Ammo]

My setup:

BC Racing Coilovers (hardest setting).
Rota Grid-V Gunmetal: 15x7 ET20 all on 185/45/15 Nankangs (rear have 15mm spacers)

All the wheels poke out: front like 8mm/1cm, rear 1cm/1.5cm.

No they won't rub :D If u have ET20, nothing will.

Only the rear tyres rub on the outside of the bodywork (it hits the edge of the fenders), but only when I have 2 people in the back.

I have camber screws in the front, but they aren't that much cambered actually.

The rear have actually more camber because of the spacers, haha.


I had 2,5mm lowering springs on these wheels before and you'll have a major gap, just saying :D

Any more questions? :D


Oh and guys, here are some pics of work my and my brother did last weekend.
My brother did all the construction work :D

https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/563588_10201012742934023_1167758018_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/1269755_10201012744014050_1923270255_o.jpg
https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/547283_10201019366179600_1360672615_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/575317_10201019366379605_1143973961_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/1238144_10201019366819616_1313365306_n.jpg

hope you like it!

[yarisgeo13]

Cool cars and you guys gave me some good ideas!

[evo165]

Thanks bro G for your detail information. Yours stanced Yaris is killer look!! :)

[G-Ammo]

thanks thanks :D appreciate it alot! sharing is caring!

any more questions are more than welcome.


I have a question though if anyone can answer this:

I have a axle back Nitto exhaust (from garm :D) and I saw you can buy midpipes and downpipes too from Nitto on the Yaris.

BUT I have the 1KR-FE engine (1.0 3 cylindre engine)... will it fit? :O

[1.5]

I dont even think they make those anymore. As long as the piping follows the same underbody routing it should be fine. Might need to cut and weld if there is no flange to bolt to.

[G-Ammo]

I see... thanks :)

[1.5]

I think an easier and more cost efficient option would be to have a local exhaust shop custom fab a full headerback piece or cat back piece

[G-Ammo]

yeah true! thanks for the tip!

[FlushYaris]

Hey guys!

I'm going for the stanced look on my yaris (probably flush!)

here are some pics of my new rims that I mounted yesterday!!

In the future I'll be putting on the BC Racing coilovers with camber ofc :D

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/21760_4762349009904_2022618518_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc6/253107_4762354450040_1617254140_n.jpg

Rims: Rota Grid-V Gunmetal (15x7 ET20)

Better photo's will be put on here when the new coilovers are mounted! :D

Can't wait!

Few future plans:
-Wind visors
- Hella Supertones
- (maaayyybeeeeee) a supercharger (ROTREX) for the 1KR-FE

What suspension were you on in this photo?

[G-Ammo]

Eibach lowering springs :)

[ilikerice]

not low enough =(

[G-Ammo]

I know :( thats why i have BC racing coilovers :D



Guyssss help me out, here's a picture of my car from the front/side:
https://scontent-b-ams.xx.fbcdn.net/hphotos-ash4/998737_10200713020961161_1657350792_n.jpg

Could anyone please do a photoshop with Rota Zero's on them? Staggered setup (front is ET38, rear is ET10).

I could get a nice deal to get those rims on my Yaris... but im doubting alot! I love oldskool rims but I also love my Grid V's!


Thanks in advance!

[1.5]

I like the zeros better than the grids

[yarisugi]

Photoshopped some Rota Zeros into your pic. Hope this helps.

[1.5]

hahahahaha Sugi what a dick lmao

[Golddeenoh]

rofl

[MyzticZ3r0]

^ Lol

[G-Ammo]

DUDE XD ON MY CAR.... that part where my wheels are... xD

Goddamnit I was like: oh nice someone gave a reaction!

:'(

Oh yeah the zero's are fully polished :D

[yarisugi]

I'm sorry. Hope this is bigger.

[MyzticZ3r0]

^ trolol

[ilikerice]

Oh god my side hurts... this is epic

[G-Ammo]

GODDAMNIT UGI!

XD stop doing that... can't keep my breath!!!

Please someone do a legit photoshop :'(

Imma cry

[yarisgeo13]

Nice rimes and wheels and I like the lowered stance it gave you. But here in south florida a lowered car wouldn't be the best idea. The streets drain way to slow!

[yarisugi]

Patience is a virtue.

[1.5]

Nice rimes and wheels and I like the lowered stance it gave you. But here in south florida a lowered car wouldn't be the best idea. The streets drain way to slow!


Not true I live here and am super slammed


Patience is a virtue.

LOL you spent all that time putting a douchey lightnint bold through it but the wheels.... now thats gonna take some time lol

[G-Ammo]

I drive in Belgium.... that's even worse :D but I don't care...

And you know what.. *table flip*... not gonna ask anymore to photoshop it...

im just going to cry here... in a corner... all alone... :'(

[1.5]

I drive in Belgium.... that's even worse :D but I don't care...

And you know what.. *table flip*... not gonna ask anymore to photoshop it...

im just going to cry here... in a corner... all alone... :'(

hah you handle Sugi's sarcasm well lol

Yea I always think you're a G when i remember you live in Europe. Ive been to Europe maybe 100 times and the roads there are horrendeous especially those cobblestones in cities.

[yarisugi]

Thank you for your patience.

[1.5]

Finally lol!!! look good

[TerenceCruz]

Damn! I'm digging those zeros! And lmao @ *table flip*

[MyzticZ3r0]

Personally, I like the ones already on your car atm, but the zeros do not look bad at all.

[G-Ammo]

True :O yeah but I just wanted to see how it looks :D not sure though... its pretty dope, but I think i like the ones I have now a bit more on them.

Tomorrow im going to get rid of the side bumper list thing :P

[Mz3oh5]

I dont like the side bumper thing, its got to go!! lol
Does anyone have an idea or a quote how long it would take to install the fog lights? I wouldnt mind doing it considering I have done 80% of my car mods. Sometimes directions dont really help & you just have to figure it out which can take longer.

[MyzticZ3r0]

I dont like the side bumper thing, its got to go!! lol
Does anyone have an idea or a quote how long it would take to install the fog lights? I wouldnt mind doing it considering I have done 80% of my car mods. Sometimes directions dont really help & you just have to figure it out which can take longer.

It takes two hours tops. If you purchase them from MicroImage, I believe on the page, they provide a guide how to install. If it's not there, search for it on the forums - relatively easy.

[Jochen]

Tomorrow im going to get rid of the side bumper list thing :P

Finally! :thumbsup:

[G-Ammo]

The foglights are easy to install... only thing that takes some time is the wiring :D but with the install guide from Garm (MicroImage) everything worked out well... But email him to get the right install guide as I started installing them with an old version (didnt work out at first...)


Here are some pics without the side bumpers!!!! it looks CLEAN AS F*CK!

https://scontent-b-cdg.xx.fbcdn.net/hphotos-ash4/1376320_10202104362156405_489056110_n.jpg
(flipflop swag yo!)
https://scontent-b-cdg.xx.fbcdn.net/hphotos-frc1/1385148_10202104362476413_1586785946_n.jpg

Those 4 wheels in the garage are my winter set...
I have to raise my car 6cm......... 6CM!!!!!!!!!!!!!! :(

https://scontent-a-cdg.xx.fbcdn.net/hphotos-prn2/1381442_10201074894567775_905048269_n.jpg
Vredestein Snowtrac 2 :D... 4 steelies + 4 tyres (almost brand new)
bought for 170 euro's!!

[MyzticZ3r0]

I do not miss the side bumpers on your car at all - looks sweet!

[G-Ammo]

me neither :D thanks!!

[D&D]

Looks so much better without the door bumper guards!

[G-Ammo]

with or without.... ? :O

[D&D]

with or without.... ? :O

Edited... WITHOUT! :D

[1.5]

Looks much better without. Nice work.

[G-Ammo]

ok! haha thanks guys :D

I think I'm going to spare money for a AE86... not going to do any engine work on this thing... 1.0 3 cylindre is waste of money.

[1.5]

Perfect for commuting lol

[G-Ammo]

Yaris as daily and the AE86 for some weekend fun / drifting hehehehe :3

[G-Ammo]

Some pics after car wash :D

With my mates Alfa Romeo Mito (turbo!)

https://scontent-a-ams.xx.fbcdn.net/hphotos-ash3/1383021_572422212812430_1799104984_n.jpg

https://scontent-a-ams.xx.fbcdn.net/hphotos-ash3/1380085_572422246145760_74830366_n.jpg
(ME! :D)



Oh yes guys... this is my new plan for next year (when winter is over)!!

http://ep.yimg.com/ay/racinglab/rota-wheel-kensei-15x8-4x114-3-0mm-73hub-royal-silver-2.gif

Rota Kensei Royal Silver: 15x8 ET0

Going to roll my fenders to the max... gonna be a badass stance baby!!!!

[1.5]

oh yeah you gonna run with the big boys now lmao. Looking real good dude and those rotas are gonna be siiiick

[G-Ammo]

Can't wait man... and going for the long red (open) lugnuts on em ;)

[1.5]

Sweet ^^^. Im gonna get some of those volk formula 2 pc locking lugs, Gotta protect my investment man lol

[G-Ammo]

Yeah true that... should also get some locks... especially when those kensei's are on it

[1.5]

Yea man you dont wana let someone take your beautiful expesnive wheels just because you wanted to save 75-80 bucks

[yarisgeo13]

Cool comparisons of both cars!!

[G-Ammo]

Yep :D my wheels are so tiny :( haha

[framisciu]

Hi, you have 1.0 l engine?
What type of filter do you have installed? the pipes where you took? I have a yaris 1.3 l, I would like to mount it too

[G-Ammo]

I just got a K&N filter on it, with some piping that came in a package, bought it for like 15 euro's (1 straight pipe, some corners) on the Japanese Auto Festival in Holland :)... and just mounted it on like normal pipe mounting (with those braces etc). I just checked what diameter the piping has and bought a filter on it that fits :)

http://images.hemmings.com/wp-content/uploads/2008/06/HMX-onthefloor_7548_resized.jpg

Got something like this but then with chrome pipes :)

[framisciu]

And of course... I couldn't handle myself:
Got some tubes (finally) and fitted a new K&N filter.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/971175_10200278867587598_453795298_n.jpg


Now i'm waiting for the Foglights from MI and I also bought new speakers on JAF for the rear passengers!

i see this picture, look great, now i search make one like this...

[carter_duli]

your car is super cool bru

[carter_duli]

what you guys think ?
im from south africa... let me know thanks
instagram duli_10
whatsapp +27721016071 :laugh::biggrin:

:thumbsup::thumbsup::thumbsup:

STANCE ?

[cali yaris]

^ Can't see the tires - need better pics of your baby man!

[1.5]

Needs more low and needs its own thread

[G-Ammo]

^this! overall it looks good man!

And yeah... that picture is my engine bay... nothing special. But not going to do anything expencive to it... going to keep this as my cheap ass daily stanced out neckbreaking yaris, while rolling in an AE86 in the weekends (in a few years probably)

:D

[G-Ammo]

On my way here to Wangang Warriors meeting in Holland with a friend who has got a 350z :D He made some cool pics!

http://imagizer.imageshack.us/v2/1375x456q90/21/kegf.jpg

[1.5]

OMG that front roller though! guy has some skill

[G-Ammo]

Yep! He makes alot of pictures from cars on meetings etc :D he's a boss... although his brother made these pics :)

[G-Ammo]

I found Golf MK2 Fender Flares for 50 bucks :D Going to buy them in a few months probably together with my new rims! Gonna be a nice wide stance!!! (same fenders as FlushYaris has).

[TerenceCruz]

Wow! Those pictures look amazing! I'm loving your car man!

[G-Ammo]

Thanks Terence! can't wait to let you guys see the new setup next year :D gonna be so dope!!!

pretty nice drop mate! Next up: COILOVERS!

[1.5]

i like how everyone is thread jacking you G-ammo

This is a show thread for one user not a thread to share pics of yarii on springs lol

[G-Ammo]

Haha yeah... ah well... don't really mind, at least they're checking out the thread and maybe get some ideas to put on their cars cuz of my pictures! As long as people aren't spamming on it and I can still give you guys updates on what I do!

[febriandp]

car's looking great! and love the rollers man

[G-Ammo]

thankyou febriandp!

[G-Ammo]

It's on steelies now! Wintermode = on :'( :'( Its actually not that high as i thought...

looks a bit like a trackcar haha

Post some pictures soon! Also... my lil bro traded his Aygo for a MR2, Beams engine (only 1000 been made in Japan) 200HP! ill post some pictures too if u guys like that.

[1.5]

ooo special edition JDM cars = Love!!!

But his little aygo was so awesome.

Looking forward to the new setup once winter is over. How are winters in Holland?

[G-Ammo]

haha its a powerful machine!

Winters can be harsh sometimes... but overall it's ''ok''. not that much snow, mostly its around 5cm/10cm... there are winters with waaay more.

Yeah about the new setup... the guy who I purchase them from didnt give me that a great deal on the new ones. I need to wait a bit longer until late januari or februari how my financial stuff is going :) if it's alright I'm definatly going for the new setup. But we have to have some patience :D!

[1.5]

true. One reason I love FL, year round show season!

[G-Ammo]

http://imagizer.imageshack.us/v2/320x240q90/c/853/sdoa.jpg (http://imageshack.com/i/npsdoaj)
http://imagizer.imageshack.us/v2/320x240q90/c/7/utym.jpg (http://imageshack.com/i/07utymj)
http://imagizer.imageshack.us/v2/320x240q90/c/196/6aaj.jpg (http://imageshack.com/i/5g6aajj)
http://imagizer.imageshack.us/v2/320x240q90/c/7/djtv.jpg (http://imageshack.com/i/07djtvj)

Some pics together :) few more will come from my yaris too!

[yarisugi]

please shrink your images... please.

[G-Ammo]

Better :O i thought i did resize them... :( its ok now :D

[1.5]

:drool:

[G-Ammo]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/1466259_10201453110342933_1517474377_n.jpg

:'( hope the winter is gone soooooooon!

[SilverSquash!]

^Car looks sweet!

..side thought, have you considered small babymoons for the steelies whilst they are on?

[G-Ammo]

babymoons?

[SilverSquash!]

http://www.yarisworld.com/forums/showthread.php?t=47978

http://practicallyclassics.phpbbhosts.co.uk/viewtopic.php?f=3&t=370

[WeeYari]

Nobody has yet to get a functioning set on Yaris stock steelies. Been talked about plenty since the inception of this forum, but has yet to be done.

[1.5]

Wow it looks like a different car lol. Wheels really make it

[G-Ammo]

Nah i dont like those babymoons... :) not my thing!

Indeed 1.5... shoes are important!!

[G-Ammo]

https://scontent-a-ams.xx.fbcdn.net/hphotos-prn2/1456559_10201574233970948_1289512939_n.jpg

Got my new LED foglights!!! finally arrived!

Thanks Garm ;)

[1.5]

ooooo pics when installed

[WeeYari]

Oh how things can change in a mere 10 months.

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/21760_4762349009904_2022618518_n.jpg

[G-Ammo]

Pics will come soon... when its a bit darker outside :) the color is not that bright yellow... but a bit calmer amber yellowish color :D Still looks nice!
But there was some water inside the right foglight case, so I'm now drying it up and then install it back.

Indeed WeeYari!! Whenever I see that pic back... I'm like: Damn... something went out of hand! IN A GOOD WAY!!

Prepare for the next setup... if it works out, gonna be DOPE and WIDE!

[G-Ammo]

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/1521955_10201576473786942_1746854227_n.jpg

Looks nice!! :D

[1.5]

Is the light output noticeably stroner than the halogen ones?

[G-Ammo]

Yes it is... its definitly less bright and as you can see... it has a soft orange colorish flow in it. Also... my previous ones really lit up the road, about 5 meters, these just 1 / 1,5 meters :)

[1.5]

oh so the LED emits less light?

[G-Ammo]

Yes :)

[cali yaris]

The yellow ones do. Now they have 1800 lumen white ones that are nearly as bright as headlights. I have a few sets, NOT cheap though!

[1.5]

oh im a little ricer I like brighter than stock headlights gotta stick with HID's i guess

[G-Ammo]

Going to buy an Injen cold air Intake tomorrow! and The guy also got an OMP steering wheel... all second hand for a nice price.

Question: is it possible to fit that OMP steering wheel without quickrelease on my Yaris?

[1.5]

yes but you still need a hub adapter but instead of getting a short hub, get a regular sized hub or you will be 10 feet away from the steering wheel lol

[G-Ammo]

Yeah he has also a steering wheel hub... :) im asking if it will fit on the yaris as his was for an aygo... but i hope its the same fitment. So ill keep u guys up to date on the new stuff!

Also... I'm not going to do the fender flares anymore :( they won't fit properly enough which I would have to cut off too much and then it will look horrible. So no new wheels either :(... maybe next year 16'' wheels or something, who knows.

As of now... going to change the interior a bit! maybe some new ideas will pop up!

[1.5]

so you are not going to go wider? Cmon youve got room, I am running stock fenders no flares

[G-Ammo]

No... going to maybe roll my own fenders instead :) also gives a wider look! We'll see.

Still happy though with this setup! maybe some new ideas will pop up in the next year!

Happy new year to you guys btw! going out now!

[1.5]

Happy New Year to you too man!

Rolling/pulling will be fine thats all ive done and i have like no rubbing

[G-Ammo]

Sweet! I maybe will consider it before the car meet season coming up :D

[G-Ammo]

Sweet! Just got some almost new second hand stuff!

I got a new OMP Trecento 300mm steering wheel (already stickerbombed middle part)
And an Injen Cold Air Intake which is built for my little engine! :D

Going to make some pictures next week when I got a new sticker bomb vinyl and going to decorate the 2 pillars next to the middle console.

I'll keep u guys up to date!

[G-Ammo]

Bought Sparco carbon doorlists and D1 Spec red long open lug nuts!

[G-Ammo]

https://scontent-b-ams.xx.fbcdn.net/hphotos-prn2/1524716_10201699918912993_69108615_n.jpg

Yeah!! more updates coming up in this week!

[G-Ammo]

HERE IT IS! Proud of it! My bro helped with the steering wheel (was a pain in the ass to take the other one off) and the intake. Stickerbombed the midconsole myself, also took me 3 hours or something. But I think it looks pretty nice!

-Sparco Carbon doorlists
-OMP Trecento Uno 300mm steering wheel
-Injen Cold Air Intake for the 1KR-FE engine

https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash4/1526084_10201706415355400_117696838_n.jpg

https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/1526976_10201706415835412_2073765698_n.jpg

https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/1496697_10201706416395426_208582452_n.jpg

[TerenceCruz]

Sweeet! Lookin great as usual man!

[G-Ammo]

thanks!

Just found a nice tuning company who are willing to make me a custom made straight midpipe for my little 1 liter engine! Also with flenses so i can take it out myself and / or replace it with my stock one if necessary!! only for 130 euro's!!
How awesome is that!

Finally some deeper and louder exhaust sound!!! hopefully not louder than 95db with the nitto axle back.

[1.5]

Nice updates man.

Thats the route I went with a custom exhaust. Much more worth it.

[G-Ammo]

Indeed! and especially for that price... I bet they can make me a full system for less than 500... but I see that it's not worth it for my yaris because of the small engine... Going to keep those guys in mind when I have my AE86

[1.5]

yea for sure. I only paid 350 USD for my headerback

[G-Ammo]

sick! stuff in the US is alot cheaper than here in europe... :( because if we see something cheap in the US we have to pay taxes on it :'(

[1.5]

same here for buying from Asia!

[G-Ammo]

Got rid of all the stickerbomb... it came off so fuck it.

[G-Ammo]

Tomorrowwww tomorrooowwwww straight midpipe tomorroowwwww my neighbours will beeee piiiisssed oooooooffffffff! :D

[1.5]

hahahahaha

[G-Ammo]

and on thursday... my horns are getting repaired.

Something wrong with them alst sunday... they don't work when using them through the steering wheel... but they do work without it or some sort.

Ah well.. hopefully they can figure out what it is and maybe re-attach everything with new wires..


ALSO bought a leather TRD shift gaiter with red stitches... looks nice! interior is clean again finally, especially without the stickerbombing...

When the midpipe is on and the horns are finally fixed I wille make some new pictures and a video of the sound :D

[Denzel_m]

Too dope man, super sick ride hey. *ThumbsUp*

[G-Ammo]

thanks man! :D

[G-Ammo]

So yeah... sucks to be me... the mechenical guy said that when we probably attached the steering wheel to the steering mechanism... we broke something inside it. They have to replace it

Guess what... 450 euro's to repair the mechanism...

:'( :'(

[D&D]

What did you break? The clockspring? If so, just get an aftermarket one on ebay. I paid $~30 when I needed one and changed it out myself in about 30 minutes.

[G-Ammo]

the inside of the mechanism just broke ... i think when steering after i put on the steering wheel... the internals broke they said

[D&D]

Well there's not much in there to break. Just the steering stem (spline) that the wheel slides onto, and the clockspring, which is a like a plastic bearing with wires inside that allow your airbag and horn to work while turning the steering wheel.

Unless you messed up the ignition wiring or something like that? Don't see how you could have though..

??

[G-Ammo]

No idea mate :( wish I knew... I just let them fix it so I dont have any problems with the horn anymore etc. and then im sure it's done right :)

[D&D]

Well good luck. That's a lot of coin to drop, it'd be worth it to me to figure it out and fix it myself.

[G-Ammo]

i know man i told himi wanted to do that, but he said that the part that i would need to fix it (some electrical wires) can't be bought privately or something... I dunno.

I just want it to be fixed the right way so i dont have any issues ever again :) if i do that myself... i dont have that security u know!


ALSO! Going to make a video about the new straight midpipe with the nitto axle back exhaust... :D its awesome!

[D&D]

IDK if there are rules in your country limiting consumers from buying certain car parts, but that sounds like a crock of bull to me and I would definitely get the opinion of another mechanic before handing your money over to this person...

[G-Ammo]

Nah man its an official toyota dealer who's going to repair it :O thats why

[D&D]

Ahh, I see. Well that makes somewhat better sense I suppose.. Good luck.

[G-Ammo]

thanks... :)