Threaded oil fill funnel

[NYC-SE]

I was wondering if anybody here has used one of these specifically on the 1NZ-FE.

https://www.amazon.com/Assenmacher-Specialty-Tools-OFTOY1038-Threaded/dp/B002YKETS8

https://www.amazon.com/gp/product/B016FVJUX0/ref=s9_dcbhz_bw_d0_g263_i1_sh

A little pricey but seems like a good idea. However it appears that maybe the Assenmacher requires an additional adaptor for our vehicles while the Motivx definitely does but its unclear if it actually comes with it.

Would really like to hear from someone who has actually used one.

[NYC-SE]

I decided to not buy either. After searching around online I came across several posts claiming that the threads on a Mobil 1 quart container match the threads on Toyota oil fill caps. It's true as you can see. Cut about 3 1/2 inches from the bottom of the container and it will clear the overhang of the ventilation intake. Voilà instant funnel.