C150 VS C50 transmission differences

[ArmstrongRacing]

While doing a build for a YW member, we learned a lot about how the older and newer transmissions differ. You can read the whole article HERE:

http://www.armstrongfamilyblog.com/armstrongracing/the-challenges-of-modifying-a-toyota-c150-transmission

http://www.armstrongfamilyblog.com/uploads/7/4/0/2/74028615/c150-vs-c56_orig.png

[saikouguy]

Great stuff, you did all the hard work for me/us I was planning on looking/comparing the differences too, Australia is littered with these C15(x) gearboxes.

Now I gotta find a C56 and do the same 6 speed as you did. :w00t:

[ArmstrongRacing]

You can use your current bell housing for any future upgrades. You only need to change the output shaft bearing from the 33mm to the 40mm. Then use the rest of the C56 or C60 parts(and axles unless you use a Yaris C50 diff).

[malibuguy]

so in theory...I can take a tercel 150 bell and bolt it to a 4.31 scion c5x trans?

[remcafee]

How much to build me an lsd trans for my 07 Liftback? I prefer to keep it the stock 5 speed