rustyBonenfant55
06-11-2026, 09:56 AM
Hi Guys G´day
I just faced an issue when replacing the oi on the atf of my Yaris III model 2016 ( XP13M EUROPE )
the atf gasket oil pan surface has a cantilever on it , causing a flat seal to be damaged when you applied a torque on the bolts much less than 7.8 N/m given on the manual.:
Is there anyone encountered such case on their Yaris previously?
it would be some great help to have some information on such discrepancy.
Appreciate your hlep in advance .
Looking forward to reading you shortly.
See attached a photos of the concerned oil pan
Rgds
Jean Yves
I just faced an issue when replacing the oi on the atf of my Yaris III model 2016 ( XP13M EUROPE )
the atf gasket oil pan surface has a cantilever on it , causing a flat seal to be damaged when you applied a torque on the bolts much less than 7.8 N/m given on the manual.:
Is there anyone encountered such case on their Yaris previously?
it would be some great help to have some information on such discrepancy.
Appreciate your hlep in advance .
Looking forward to reading you shortly.
See attached a photos of the concerned oil pan
Rgds
Jean Yves