|
03-17-2012, 08:40 PM | #1 |
Drives: 07 BB yaris / 06 Mustang Gt Join Date: Apr 2007
Location: northern california
Posts: 136
|
How to Remove cv axle from passangerside
I am having wheel bearing replaced, i got the tie bar and control arm ball joint removed. Do i tap on the axle with nut to remove it. I hit it with plastic hammer, it doesnt move at all. ;(
|
03-17-2012, 09:53 PM | #2 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Are you having trouble getting it out of the tranny or having trouble getting the hub off of it?
__________________
|
03-17-2012, 10:32 PM | #3 |
Drives: 07 BB yaris / 06 Mustang Gt Join Date: Apr 2007
Location: northern california
Posts: 136
|
Hub :)
|
03-17-2012, 11:04 PM | #4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Hmmm - When I changed the passenger axle on Crashy the hub slipping of the splines was the easy part. The service manual shows using the SST 09628-10011, which is basically a puller to remove it. With mine, I just tapped around the backside of the hub with a deadblow hammer until it slid loose.
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
DIY : How to remove door panels | FEINT | DIY / Maintenance / Service | 13 | 11-18-2021 02:16 AM |
DIY (08' USDM LB): Interior Light Color Change | revnull | DIY / Maintenance / Service | 37 | 05-21-2016 12:59 PM |
[DIY] To remove logotipos of the mark | Sérgio Barros | DIY / Maintenance / Service | 6 | 02-23-2007 07:32 PM |