|
04-22-2012, 12:43 PM | #37 |
Baffle is the MDF ring you use to hold the speakers.
OK, this is my best shot, this would be my best advice from my experience and it's written in my thread some where. If you go with the 80PRS, the Tweeters on a-pillars, woofer in the trunk and (pay attention here) get the L6 (Midbass) and put them on the doors I assure you will sound much better than the Mids on the a-pillars, I've gone through a big process of comparing and if I where you I would go that way. PLDs would be in your favor, you will be full active, enjoy the extra width of the stage provided by the L6s down in the doors, since the L6 can play up to 5khz really nice and your tweeters can go down to 5 easily. I do this exercise many times to show how good the L6s are and turn of my Mids, believe me it's true. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
04-22-2012, 12:54 PM | #38 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ?
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 12:54 PM | #39 | |
Quote:
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 01:01 PM | #40 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
Shipping will be expensive to Canada since it is probably very heavy...
is it the IDQ12V3D4 ? I had expected 249.99 + shipping as it is on sonicelectronix... PM me with your price...I am interested....
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 01:03 PM | #41 | |
Quote:
My point is that going this way it will have a better stage than 3 way with Mids in a-pillars, In seconds I can turn off my mids and have a 2 way, it's not as spectacular as the 3 way for obvious reasons (PLDs) but sounds better than my old 3 way with Mids in a-pillars. my 2cts D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 01:07 PM | #42 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
Do you have pics of your mids and kick area as it is right now ?
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 01:17 PM | #43 |
Post # 1794
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
04-22-2012, 01:22 PM | #44 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
Are you going to fiberglass a kickpanel for the mids ?
And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ?
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 01:32 PM | #45 | |
Quote:
Yes, I extended the ground and move them a little up under the dash on both sides. I may modify the covering in the future with a big opening but right now I have to finish other stuff. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 02:59 PM | #46 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
I just took a look at this part of your thread....WOW!! very nice what sqcomp have done with his doors and kickpanel!
That gives me a lot of idea....I'll do like you told me...start with tweeter in a-pillar and L6 in doors!...when I'll be good at fiberglassing I'll kickpanel mids! You guys are awesomeee
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 04:04 PM | #47 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!!
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 04:05 PM | #48 | |
Quote:
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 04:07 PM | #49 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 04:16 PM | #50 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
What material is the gray piece made of ? I am so curious..asking lot of question...sorry
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
04-22-2012, 04:20 PM | #51 | |
Quote:
No problem! (O: That is a Mock-up I made (from foam board) before cutting the MDF baffles. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 04:29 PM | #52 | |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
Quote:
And do you think I should jump on the DEH-80PRS ?
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
|
04-22-2012, 04:36 PM | #53 | |
Quote:
on a budget I think a 2 way active the Yaris sounds great! D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-22-2012, 04:46 PM | #54 |
Drives: Yaris Sedan 2009 Join Date: Sep 2010
Location: Quebec
Posts: 566
|
So if I resume...
L1V1 in A-Pillar as tweeter 5Khz and up L6 in door as mid-range-midbass..100Hz up to 5kHz Sub in trunk or some where else...100Hz and less Powerbass 1100.5X 5channel amp for the whole setup.. Fiberglassing the trunk for sub...fiberglassing A-pillar for tweeter...fiberglassing doors for Mids! Pionner DEH-80PRS in the deck
__________________
Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp |
|
|