My 2011 Vitz - Page 21 - Toyota Yaris Forums

ern-diz · 02-17-2015, 07:04 PM

Car is looking really nice, TerenceCruz.

TerenceCruz · 02-18-2015, 12:22 AM

Quote:

Originally Posted by yarisugi

I like that framed picture of your car!
Who took the shot?

Thanks Sugi! She took it, just edited it slightly, then printed it out at Kinkos.

Quote:

Originally Posted by ern-diz

Car is looking really nice, TerenceCruz.

Much appreciated man, thank you!

TerenceCruz · 03-17-2015, 12:06 AM

Hey guys, haven't updated this in a while. No real updates, just been driving the car and enjoying it. Still saving for my 10k/8k Swift springs, just had to take care of some more important stuff first. Anyways, here are some pictures :) I still have to install my second pair of camber bolts in the front, and drop the front a little bit more too when I get the Swift springs. Thanks for looking!

WorkTL · 03-17-2015, 05:25 AM

I love it

ern-diz · 03-17-2015, 03:16 PM

I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.

TerenceCruz · 03-18-2015, 12:31 AM

Quote:

Originally Posted by WorkTL

I love it

Thanks so much!

Quote:

Originally Posted by ern-diz

I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.

Thank you, man! I love the lip, it doesn't compare to the JDM RS front lip, but hey, $10 for a decent looking lip is fine with me. For now, of course haha. I actually was considering taking off the mud flaps since they're kind of small compared to the width of the rim, but I don't know yet haha.

azn_driver · 03-20-2015, 08:12 AM

Looks great, wish I can go that low with my yaris but uh the s/o will kill me..

and about your Swift Spring upgrade, here is another reputable company that makes springs with custom spring rates:

http://www.hypercoils.com/

dumbo0 · 04-11-2015, 11:33 AM

terence, what did you use to cover your rear wiper? taking off mine too lol

TerenceCruz · 04-11-2015, 03:03 PM

Quote:

Originally Posted by azn_driver

Looks great, wish I can go that low with my yaris but uh the s/o will kill me..

and about your Swift Spring upgrade, here is another reputable company that makes springs with custom spring rates:

The s/o? Haha but thanks a lot man, much appreciated. Sweet, i'll take a look at that company!

http://www.hypercoils.com/

Quote:

Originally Posted by dumbo0

terence, what did you use to cover your rear wiper? taking off mine too lol

Haha nice! I just bought a 1" plastic plug from Lowes lol

TerenceCruz · 05-06-2015, 03:56 PM

Finally received my 6" 10k and 5" Swift springs via FedEx. Time to go lower and fix my fitment to get it exactly how I want it. I'll post a picture of the car when they're installed! Now I gotta figure out what to set my dampening to lol.

TerenceCruz · 05-09-2015, 03:29 AM

Hey guys, so the springs are installed along with the second pair of camber bolts in the front. They ride great, and I haven't even adjusted my dampening yet. But, only problem I'm having is in the front. The front left side is making some clunking noise as if the spring is loose or something, and the right side is just making some creaking sound. Do you guys have any idea what it might be? Thanks a lot!

Note: Megan Racing coilovers

Went from 8" 6k Megan springs in the front to 6" 10k Swift springs
Went from 7" 3k Megan springs in the rear to 5" 8k Swift springs

coheed · 05-09-2015, 01:05 PM

Do the springs have those plastic sleeve things on them? If not that can be the creaking noise. As far as the clunking that's probably the rear springs. When I put the shorter springs on my rear they would pop up and down in the seats and clunk. They never unseated themselves though.

TerenceCruz · 05-09-2015, 02:26 PM

Quote:

Originally Posted by coheed

Do the springs have those plastic sleeve things on them? If not that can be the creaking noise. As far as the clunking that's probably the rear springs. When I put the shorter springs on my rear they would pop up and down in the seats and clunk. They never unseated themselves though.

Really? I'm almost positive the clunking is from the front.. And no they don't have the plastic sleeves on them cause they wouldn't fit on there. Megans were 62mm ID and Swifts are 60mm so the plastic sleeves wouldn't fit.

Freestylin · 05-10-2015, 01:21 PM

Have the front springs been pre-loaded correctly?

TerenceCruz · 05-10-2015, 09:29 PM

Quote:

Originally Posted by Freestylin

Have the front springs been pre-loaded correctly?

There is some play where the springs can move up and down a bit, but I dropped some of the preload a little bit in order to get to the height I wanted. If I spin the shock down any more it's too close to my axle. I was wondering if it was the spring bouncing, but once the weight of the car is on the ground the springs shouldn't be able to move, correct?

TerenceCruz · 05-10-2015, 09:33 PM

Current ride height. About 1cm of clearance between the rear sidewall and fender, and maybe half an inch clearance in the front. I love it. But I will love it more when I get rid of that clunking noise and the tiny bit of creaking I hear lol.

TerenceCruz · 05-12-2015, 11:07 PM

Found the problem! It was actually my LOWER sway bar end link. I didn't even think to touch that because we didn't touch it in the first place (rookie mistake, I know lol). Shook the car while my friend was feeling for something loose, and he felt the lower sway bar end link rattle, so we tightened that, and now all is well! Now I'm just enjoying the lower ride height with less scraping. Best part of all, being able to take passengers again :) Current pics.

ern-diz · 05-13-2015, 11:28 AM

Fresh to death

04-11-2015, 11:33 AM	#368
dumbo0 Drives: Betsy - 07 Yaris HB Join Date: Sep 2011 Location: San Francisco, CA Posts: 98	terence, what did you use to cover your rear wiper? taking off mine too lol __________________ WILDY imaginative WONDERFULLY expressive

05-09-2015, 01:05 PM	#372
coheed Drives: 08 BB LB Join Date: Dec 2008 Location: Maiden, NC Posts: 785	Do the springs have those plastic sleeve things on them? If not that can be the creaking noise. As far as the clunking that's probably the rear springs. When I put the shorter springs on my rear they would pop up and down in the seats and clunk. They never unseated themselves though. __________________ Too much of car culture is people taking things too seriously and not enjoying it for what it is.

05-10-2015, 01:21 PM	#374
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	Have the front springs been pre-loaded correctly? __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 12:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 08:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 10:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 12:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 08:26 PM

02-17-2015, 07:04 PM	#361
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Car is looking really nice, TerenceCruz.

03-17-2015, 12:06 AM	#363
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Hey guys, haven't updated this in a while. No real updates, just been driving the car and enjoying it. Still saving for my 10k/8k Swift springs, just had to take care of some more important stuff first. Anyways, here are some pictures :) I still have to install my second pair of camber bolts in the front, and drop the front a little bit more too when I get the Swift springs. Thanks for looking!

03-17-2015, 05:25 AM	#364
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	I love it

03-17-2015, 03:16 PM	#365
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.

03-20-2015, 08:12 AM	#367
azn_driver Drives: Toyota Vitz Join Date: Jul 2014 Location: Toronto, ON Posts: 4	Looks great, wish I can go that low with my yaris but uh the s/o will kill me.. and about your Swift Spring upgrade, here is another reputable company that makes springs with custom spring rates: http://www.hypercoils.com/

05-06-2015, 03:56 PM	#370
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Finally received my 6" 10k and 5" Swift springs via FedEx. Time to go lower and fix my fitment to get it exactly how I want it. I'll post a picture of the car when they're installed! Now I gotta figure out what to set my dampening to lol.

05-09-2015, 03:29 AM	#371
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Hey guys, so the springs are installed along with the second pair of camber bolts in the front. They ride great, and I haven't even adjusted my dampening yet. But, only problem I'm having is in the front. The front left side is making some clunking noise as if the spring is loose or something, and the right side is just making some creaking sound. Do you guys have any idea what it might be? Thanks a lot! Note: Megan Racing coilovers Went from 8" 6k Megan springs in the front to 6" 10k Swift springs Went from 7" 3k Megan springs in the rear to 5" 8k Swift springs

05-10-2015, 09:33 PM	#376
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Current ride height. About 1cm of clearance between the rear sidewall and fender, and maybe half an inch clearance in the front. I love it. But I will love it more when I get rid of that clunking noise and the tiny bit of creaking I hear lol.

05-12-2015, 11:07 PM	#377
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Found the problem! It was actually my LOWER sway bar end link. I didn't even think to touch that because we didn't touch it in the first place (rookie mistake, I know lol). Shook the car while my friend was feeling for something loose, and he felt the lower sway bar end link rattle, so we tightened that, and now all is well! Now I'm just enjoying the lower ride height with less scraping. Best part of all, being able to take passengers again :) Current pics.

05-13-2015, 11:28 AM	#378
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Fresh to death