|
|
06-30-2015, 01:33 PM | #1 |
ThatYarisGuy
Drives: Toyota Yaris 2012 SE Join Date: Oct 2012
Location: Stockton, CA
Posts: 126
|
do I use A toothpick or a screwdriver to take it out?
__________________
|
07-01-2015, 03:28 PM | #2 |
Drives: Yaris '05 1.3 Hatch "R.I.P." Join Date: Aug 2014
Location: South Africa
Posts: 127
|
It's quite hard. I used a small flat-headed screwdriver and a hammer to tap at the resin "carefully" and to dig in it. Make sure to get it all off so the screw doesn't strip when you try to adjust it.
Maybe someone else knows a safer or easier way?? :P And remember it is a Allen Key screw. It was quite difficult to source the correct one here where I live but everything is difficult to find over here :P |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TPS reading at WOT with 1ZZ throttle body? | 4/20 NEVER FORGET | Performance Modifications | 14 | 07-02-2023 04:20 AM |
Installed the 1zz throttle body - | AlexNet0 | DIY / Maintenance / Service | 135 | 08-01-2014 07:57 AM |
FS: 1ZZ throttle body and Fujita intake | mrbond | Items for Sale by private party | 25 | 09-08-2009 10:21 PM |
Intake to match the 1ZZ throttle body | fuji | DIY / Maintenance / Service | 2 | 06-17-2009 10:02 PM |
For Sale: 1ZZ Throttle Body and 0.25" aluminum wheel spacers | m911gt | Items for Sale by private party | 6 | 04-25-2009 08:52 PM |