The 2zr-fe engine swap guide

[ArmstrongRacing]

Here are the highlighted pins that need swapping.

1) If you keep the Yaris transmission: Move the speed sensor wires over to the same spots in the Xd plug CA2.

1a) If you use the Xd transmission, your car better have ABS to steal the speed signal from....those are the only options I know of at this time regarding speed signals.

2) The MAF sensor power wire at CA2#9 has no supporting pin in the Yaris fusebox. I tried removing this wire from the plug and soldering it to another +12v wire in the fuse box...but the MAF voltage would fluctuate. My final fix was to cut the power wire 8" from the MAF plug and run a dedicated power wire via a mini-add-a-circuit in a IG switched fuse location.