Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 03-27-2010, 07:44 PM   #1
aucorium
AKA Samurai Racer
 
aucorium's Avatar
 
Drives: Yaris 2006
Join Date: Jul 2006
Location: South Africa
Posts: 834
Send a message via MSN to aucorium
))) new TS exhaust question (((

hey guys

i did a cat back exhaust on my TS , 57mm pipe all the way to the back , kept the OE resonator in , but got a megan racing rear exhaust muffler , car pulls alot stronger from the bottom , but seems to be lacking on top a little now , should i have gone smaller ? like 50mm ? as the OEM pipe size is approx 45mm from the factory , i feel from pull away its much stronger , but seems to fade out at high speeds a little , will a smaller exhaust pipe work better ? should i give the ECU time to learn first ? should i go smaller to 52mm mabye ? or 50mm ?
__________________
JDMtuner
Import Performance Tuning
www.jdmtuner.co.za
aucorium is offline   Reply With Quote
Old 03-27-2010, 09:42 PM   #2
tk-421
Super Moderator
 
tk-421's Avatar
 
Drives: 5D-07-LB
Join Date: Jan 2007
Location: Dagobah
Posts: 4,367
57mm is too wide unless you are FI. 50mm would be closer to what is recommended for NA setups.
__________________
tk-421 is offline   Reply With Quote
Old 03-28-2010, 04:46 AM   #3
aucorium
AKA Samurai Racer
 
aucorium's Avatar
 
Drives: Yaris 2006
Join Date: Jul 2006
Location: South Africa
Posts: 834
Send a message via MSN to aucorium
thx for the reply buddy, FI ?

yeah , i know i have a 1800cc TS , but the 57mm seems to be to big , OEM is 45mm from the center resonator , you think 50mm will be ok ? will i loose power ? should i rather put the OEM piping back with my aftermarket rear muffler only?
__________________
JDMtuner
Import Performance Tuning
www.jdmtuner.co.za
aucorium is offline   Reply With Quote
Old 03-28-2010, 05:59 PM   #4
tk-421
Super Moderator
 
tk-421's Avatar
 
Drives: 5D-07-LB
Join Date: Jan 2007
Location: Dagobah
Posts: 4,367
FI = Forced Induction (i.e. turbo)
50mm is fine. Not sure how going any wider will help matters.
__________________
tk-421 is offline   Reply With Quote
Old 03-29-2010, 01:21 AM   #5
aucorium
AKA Samurai Racer
 
aucorium's Avatar
 
Drives: Yaris 2006
Join Date: Jul 2006
Location: South Africa
Posts: 834
Send a message via MSN to aucorium
i checked on the net , all the 1zzge motors aftermarket exhaust sizes are 60.5 mm , the 1zzge is na , and runs a little more KW , but less torque , so then in theory the 57mm on my 1.8 should be ok ? or at very least , i should go down to 53mm ? as i see the 1.5 yaris has a 50mm sizing on its aftermarket axel back systems from places like greddy.
__________________
JDMtuner
Import Performance Tuning
www.jdmtuner.co.za
aucorium is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Megan exhaust question MGargano Performance Modifications 12 03-18-2014 03:23 PM
question about exhaust. wowitswil Performance Modifications 17 11-13-2009 04:18 PM
Quick Exhaust question... nickhjort Performance Modifications 22 05-22-2009 11:02 AM
does BACK-PRESSURE increase MPG vs straight thru... marcus Fuel Economy Forum 25 05-03-2009 09:23 PM
Exhaust Question MGargano Performance Modifications 12 04-18-2009 10:48 AM


All times are GMT -4. The time now is 09:20 PM.




YarisWorld
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.