|
04-06-2010, 05:01 PM | #73 |
yours and mine i need to bring back tomorrow to make the holes but if you want ill ship yours w/o the hole, i have a nos system and i don't know if is the same, also the fab told me that if i use the silicone that is for making gaskets i will not have any problems and i can ask him about the anodize but hell probably charge more.
__________________
|
|
04-06-2010, 05:43 PM | #74 |
Super Moderator
|
I'm willing to pay a little more for the anodizing. Please ask him how much it'll cost.
As far as the hole... I'm not sure. Might be tough to get it done around here. I could post a pic of my fogger and compare it to yours?
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
|
04-06-2010, 05:52 PM | #75 |
ok do that and i can compare it to mine.
__________________
|
|
04-06-2010, 07:38 PM | #76 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
Question, one side is designed for to install the 1zz throtel body and other side for intall on intake manifold but the size of the hole is biger than the yaris TB hole or the same diameter??? If this is the same, I think that the 1zz TB become like a 1nz TB!
|
04-06-2010, 09:17 PM | #77 |
Super Moderator
|
The diameter on the 1ZZ TB is larger than the 1NZ TB. Hence the benefit of having the adapter to smooth things out.
@cruz-gsr: Here's the pic of my fogger:
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
Last edited by tk-421; 04-07-2010 at 06:39 PM. |
04-08-2010, 07:09 AM | #78 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
anubody have a new about shiping?
|
04-08-2010, 03:33 PM | #79 |
yeah they ship yesterday, for you they said i will take about a week to 10 days.
__________________
|
|
04-08-2010, 11:04 PM | #80 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
ok, tanks!!!
|
04-09-2010, 11:09 PM | #81 |
Drives: 2009 Yaris Hatchback Join Date: Feb 2009
Location: NJ
Posts: 792
|
Received mine today. This thing looks hot! Can't wait to do the install, though I just realized I'll need longer bolts or studs to bolt the 1ZZ TB and spacer to the manifold, since the OEM ones will be too short (and I snapped a stud the last time I tried this swap, so I've been running with 3 for a few months).
What are you guys planning to use in between the TB/spacer and spacer/manifold to ensure a good seal? |
04-10-2010, 08:12 AM | #82 |
im going to use the black silicone that is desing for making gaskets its like $3 at autozone
__________________
|
|
04-12-2010, 08:00 PM | #83 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
Anybody have receive her spacer and test it???
|
04-12-2010, 08:15 PM | #84 |
Super Moderator
|
Please post the longer bolt size if/when you can. I'm still waiting on my spacer, so I can go get these before it gets here. TIA
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
|
04-12-2010, 08:17 PM | #85 |
Drives: 2009 Yaris Hatchback Join Date: Feb 2009
Location: NJ
Posts: 792
|
Ditto. Actually, I have my TB and spacer, but I'd rather someone else be the guinea pig on this one. And I need the specs for the longer bolts.
|
04-14-2010, 09:13 PM | #86 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
I receive my spacer... tanks. Anybody have try her???
|
04-14-2010, 09:37 PM | #87 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll
|
04-14-2010, 09:39 PM | #88 |
its good that someone picked this up where i failed to deliver
|
|
04-14-2010, 09:47 PM | #89 | |
Super Moderator
|
Quote:
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
|
|
04-14-2010, 10:03 PM | #90 |
Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
Yes I know but if the hole is the same that original, what for use a larger thrtoel if you reduce de diameter. The 1zz throtel is juste to litel larger than the holl of intake manifold, so the spacer can be 2.2 ich to 2 ich, not 2.2 ich to 1.8 inch? I think :P
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dash destroyed in electrical fire. | purpleminx | General Yaris / Vitz Discussion | 79 | 06-12-2009 03:53 PM |
[Recovered] Group Buy for Australia #1 (Badges) | harveyjai | Australia | 9 | 12-13-2008 03:59 PM |