GROUP BUY: 1NZ to 1ZZ TB spacer/adapter

[cruz-gsr]

yours and mine i need to bring back tomorrow to make the holes but if you want ill ship yours w/o the hole, i have a nos system and i don't know if is the same, also the fab told me that if i use the silicone that is for making gaskets i will not have any problems and i can ask him about the anodize but hell probably charge more.

[tk-421]

I'm willing to pay a little more for the anodizing. Please ask him how much it'll cost.
As far as the hole... I'm not sure. Might be tough to get it done around here.
I could post a pic of my fogger and compare it to yours?

[cruz-gsr]

ok do that and i can compare it to mine.

[Maitre_Te_Te]

Question, one side is designed for to install the 1zz throtel body and other side for intall on intake manifold but the size of the hole is biger than the yaris TB hole or the same diameter??? If this is the same, I think that the 1zz TB become like a 1nz TB!

[tk-421]

The diameter on the 1ZZ TB is larger than the 1NZ TB. Hence the benefit of having the adapter to smooth things out.

@cruz-gsr: Here's the pic of my fogger:

[Maitre_Te_Te]

anubody have a new about shiping?

[cruz-gsr]

yeah they ship yesterday, for you they said i will take about a week to 10 days.

[Maitre_Te_Te]

ok, tanks!!!

[MGargano]

Received mine today. This thing looks hot! Can't wait to do the install, though I just realized I'll need longer bolts or studs to bolt the 1ZZ TB and spacer to the manifold, since the OEM ones will be too short (and I snapped a stud the last time I tried this swap, so I've been running with 3 for a few months).

What are you guys planning to use in between the TB/spacer and spacer/manifold to ensure a good seal?

[cruz-gsr]

im going to use the black silicone that is desing for making gaskets its like $3 at autozone

[Maitre_Te_Te]

Anybody have receive her spacer and test it???

[tk-421]

Originally Posted by MGargano

Received mine today. This thing looks hot! Can't wait to do the install, though I just realized I'll need longer bolts or studs to bolt the 1ZZ TB and spacer to the manifold, since the OEM ones will be too short.

Please post the longer bolt size if/when you can. I'm still waiting on my spacer, so I can go get these before it gets here. TIA

[MGargano]

Originally Posted by tk-421

Please post the longer bolt size if/when you can. I'm still waiting on my spacer, so I can go get these before it gets here. TIA

Ditto. Actually, I have my TB and spacer, but I'd rather someone else be the guinea pig on this one. And I need the specs for the longer bolts.

[Maitre_Te_Te]

I receive my spacer... tanks. Anybody have try her???

[Maitre_Te_Te]

the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll

[AlexNet0]

its good that someone picked this up where i failed to deliver

[tk-421]

Originally Posted by Maitre_Te_Te

the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll

The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.

[Maitre_Te_Te]

Originally Posted by tk-421

The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.

Yes I know but if the hole is the same that original, what for use a larger thrtoel if you reduce de diameter. The 1zz throtel is juste to litel larger than the holl of intake manifold, so the spacer can be 2.2 ich to 2 ich, not 2.2 ich to 1.8 inch? I think :P