Scion XB / Yaris Blitz SC compatible? - Toyota Yaris Forums

TOLMACH · 12-12-2012, 01:08 PM

Same engines.. would there be any differences in supercharger sets?

Thx

P.

TOLMACH · 12-12-2012, 01:17 PM

The vendor can sell it for around 1500

http://www.ebay.com/itm/Scion-Xa-Xb-...item2578a797f6

BAsed on what I am reading right now.. may be not totally compatible

Focus_Sh1ft · 12-12-2012, 01:21 PM

IIRC someone did this a while back and it did in fact need modification. Someone else will probably know better than me.

CTScott · 12-12-2012, 04:25 PM

Quote:

Originally Posted by Focus_Sh1ft

IIRC someone did this a while back and it did in fact need modification. Someone else will probably know better than me.

I believe it was thebarber that had one on his. The xA/xB has a different setup throttle body, and the blitz kit for it is different, as the intake to it has a flexible coupling to a second metal tube that the throttle body bolts to.

TOLMACH · 12-12-2012, 04:46 PM

Quote:

Originally Posted by CTScott

I believe it was thebarber that had one on his. The xA/xB has a different setup throttle body, and the blitz kit for it is different, as the intake to it has a flexible coupling to a second metal tube that the throttle body bolts to.

Thank you!

I am not even impressed anymore.. We just assume that you know everything ))))

cali yaris · 12-12-2012, 06:12 PM

I would guess the fuel controller would be a little different as well, and I know the pinouts on the xB ECU are different.

TOLMACH · 12-12-2012, 07:24 PM

^ Thanks

CTScott · 12-12-2012, 09:39 PM

The fuel controller is identical, but you would need to follow the Yaris installation directions, since as Garm mentioned, the ECM pinout is different.

thebarber · 12-12-2012, 09:55 PM

throttle body mount is different, you'd have to fab an adapter plate to make the yaris throttle body (4 bolt) fit the echo/xb throttle body setup (3 bolt)

iirc, the angle is a BIT different as the xb and yaris have different airbox setups...not a big deal if you're running a short ram, though

wiring, as mentioned, you'd have to use the blitz instructions for a yaris

and i think you'd have to find a new belt length since the xb runs a stepped crank pulley

**ive OWNED a blitz and greddy s/c for an xb1, but never put it on a car...i ended up finding a yaris blitz kit for mine**

vten · 12-12-2012, 10:49 PM

I believe mine is a retrofitted from the Xb as well, but mine is modified to have a fixed pulley.

other than you need to fabricate the throttle body mounting, it's pretty much plug and play, but I dont use the supplied fuel controller, Im using AEM FIC instead

TOLMACH · 12-13-2012, 01:58 AM

^ Thanks guys!

BEEF · 12-13-2012, 06:38 AM

I wonder also if the adaptor that tooter made for his intake manifold would work on this intake and I am sure tooter would cut you a deal for just that.

TOLMACH · 03-17-2013, 06:27 PM

Update:

Started installing my kit yesterday. I am slow but managed to make some progress )) Mechanical part is circa 90% complete: the kit is installed though not wired. The car starts, idles kinda rough (does not stall, also no CELs) but she always does it after the battery is disconnected.. looking good so far. One of pics shows tooter's adaptor between the intake and the TB. I might also need to play with belt tension - I am hearing some sort of squealing as engine rpm increase.

http://photo.qip.ru/users/tolmach/96608749/130266829/

Tooter's adaptor
http://photo.qip.ru/users/tolmach/96608749/130266837/

http://photo.qip.ru/users/tolmach/96608749/130266839/

CrankyOldMan · 03-17-2013, 06:51 PM

Excellent! We had actually talked about this in a "Blitz + 1ZZ TB" thread recently. I would actually prefer to have the xB upper intake side, so that I could make a cleaner connection to the throttle body after the flex coupling.

TOLMACH · 03-17-2013, 06:56 PM

^ Tooter's adaptor is awesome. It is not cheap but imo is worth the price.

CrankyOldMan · 03-17-2013, 07:55 PM

Quote:

Originally Posted by TOLMACH

^ Tooter's adaptor is awesome. It is not cheap but imo is worth the price.

Agreed. There was some quality engineering involved in the development of that part.

TOLMACH · 03-19-2013, 03:07 PM

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

CTScott · 03-19-2013, 04:05 PM

Quote:

Originally Posted by TOLMACH

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

Yes. 0441 is an issue with the purge VSV, which is that little square box.

12-12-2012, 01:08 PM	#1
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	Scion XB / Yaris Blitz SC compatible? Same engines.. would there be any differences in supercharger sets? Thx P.

12-12-2012, 06:12 PM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I would guess the fuel controller would be a little different as well, and I know the pinouts on the xB ECU are different. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-12-2012, 09:39 PM	#8
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	The fuel controller is identical, but you would need to follow the Yaris installation directions, since as Garm mentioned, the ECM pinout is different. __________________

12-12-2012, 09:55 PM	#9
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	throttle body mount is different, you'd have to fab an adapter plate to make the yaris throttle body (4 bolt) fit the echo/xb throttle body setup (3 bolt) iirc, the angle is a BIT different as the xb and yaris have different airbox setups...not a big deal if you're running a short ram, though wiring, as mentioned, you'd have to use the blitz instructions for a yaris and i think you'd have to find a new belt length since the xb runs a stepped crank pulley ive OWNED a blitz and greddy s/c for an xb1, but never put it on a car...i ended up finding a yaris blitz kit for mine __________________

12-13-2012, 06:38 AM	#12
BEEF View User's Garage Drives: 2008 yaris 3d Join Date: Apr 2011 Location: north carolina Posts: 732	I wonder also if the adaptor that tooter made for his intake manifold would work on this intake and I am sure tooter would cut you a deal for just that. __________________ Be the change you wish to see in the world -Mahatma Gandhi-

12-12-2012, 01:17 PM	#2
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	The vendor can sell it for around 1500 http://www.ebay.com/itm/Scion-Xa-Xb-...item2578a797f6 BAsed on what I am reading right now.. may be not totally compatible

12-12-2012, 01:21 PM	#3
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	IIRC someone did this a while back and it did in fact need modification. Someone else will probably know better than me.

12-12-2012, 07:24 PM	#7
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	^ Thanks

12-12-2012, 10:49 PM	#10
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	I believe mine is a retrofitted from the Xb as well, but mine is modified to have a fixed pulley. other than you need to fabricate the throttle body mounting, it's pretty much plug and play, but I dont use the supplied fuel controller, Im using AEM FIC instead

12-13-2012, 01:58 AM	#11
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	^ Thanks guys!

03-17-2013, 06:27 PM	#13
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	Update: Started installing my kit yesterday. I am slow but managed to make some progress )) Mechanical part is circa 90% complete: the kit is installed though not wired. The car starts, idles kinda rough (does not stall, also no CELs) but she always does it after the battery is disconnected.. looking good so far. One of pics shows tooter's adaptor between the intake and the TB. I might also need to play with belt tension - I am hearing some sort of squealing as engine rpm increase. http://photo.qip.ru/users/tolmach/96608749/130266829/ Tooter's adaptor http://photo.qip.ru/users/tolmach/96608749/130266837/ http://photo.qip.ru/users/tolmach/96608749/130266839/

03-17-2013, 06:51 PM	#14
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Excellent! We had actually talked about this in a "Blitz + 1ZZ TB" thread recently. I would actually prefer to have the xB upper intake side, so that I could make a cleaner connection to the throttle body after the flex coupling.

03-17-2013, 06:56 PM	#15
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	^ Tooter's adaptor is awesome. It is not cheap but imo is worth the price.

03-19-2013, 03:07 PM	#17
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	Just got p0441 CEl Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Factory OEM Scion T1814 Pioneer Deck in the Yaris PICS	auxmike	In Car Entertainment + Electronics (audio / video / alarm)	20	08-02-2012 11:30 PM
Putting scion seats in a yaris	xnamerxx	Cosmetic Modifications (Exterior/Interior)	3	03-09-2010 12:17 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM