Display size - Toyota Yaris Forums

Shroomster · 09-22-2009, 03:03 PM

we had this one time in o/t section where everyone said what size there screens were.

I'm bringing this concern up over here before it ruins a thread about a members boosted s2000. anyways.

I'd just like to say I have a 22" (horizontal

) screen I never figured out how to set up the display size correctly.

what I'm trying to say is this: my screen for Yarisworld is cut off

I get the upper task bar over to search and then I have to scroll over.
hope that makes sense.

is this an error on my part or YW?

cali yaris · 09-22-2009, 03:08 PM

you should be able to increase your screen resolution and see the whole thing. I can change my monitor settings and duplicate what you see.

Mine is currently set to 1280 x 800

Shroomster · 09-22-2009, 03:14 PM

yeah....it's on my end you're right Garm.

I just adjusted it unfortunately I can't get a refresh rate higher than 75mhz oh well

cali yaris · 09-22-2009, 04:45 PM

refresh rates I don't know much about. Is that a function of the graphics card or the monitor itself?

Shroomster · 09-22-2009, 06:15 PM

I thought it was the processor for the Tv (in this case at least I'm using a tv as the display)

I think the graphics card for the refresh rate of a monitor....but at any rate the card is refreshing the tv @ 75hz max on this display....I guess it's ok.

so bottom line is my display settings were out of whack not the websites hehe...

wiliker · 09-22-2009, 07:57 PM

1680x1050 is my setting on my 22" screen. Give that a shot.

Shroomster · 09-22-2009, 08:19 PM

I have it set to 1280x720

Quote:

Originally Posted by wiliker

1680x1050 is my setting on my 22" screen. Give that a shot.

geez the closest I can get is 1600x900 damn...now everything is stretched crazy like lol. The icons are so small and far apart....

Bob Dog · 09-23-2009, 07:13 AM

I run a 22' monitor and keep mine at 1680x1050 refresh rate 60 hertz and I can see everything on every web site in correct symetry. Refresh rates are how often your graphics card or MB onboard graphics device sends a new signal your the pixels in your monitor. Refresh rates effect different monitors differently depending on the image latentcy (how long a pixel stays visable after it has been sent) Generally speaking the higher the refresh rate the better the image.

*tk-421* · 09-23-2009, 08:28 AM

@Shroomster: Please post the monitor model and I'll try to see if I can find some information on it. AFAIK you shouldn't set your refresh rate to anything higher than 60Hz if it's an LCD.

Shroomster · 09-23-2009, 12:37 PM

^^^really?

C-NET specs

Dynex website specs

Bob Dog · 09-23-2009, 12:39 PM

I should have said that TK, thank you.

These days if your computer recognizes your monitor, plug and play will usually block damaging refresh rates, but I don't know what it will do with a tv.

*tk-421* · 09-23-2009, 01:05 PM

It's quite possible you will be able to get other possible resolutions if you set the refresh rate to 60Hz. LCD doesn't refresh the way old CRTs do. See http://bit.ly/Hq4Sg for more info

Bob Dog · 09-23-2009, 01:18 PM

Yeah, set the refresh rate 60 and see what resolutions show up on the dropdown menu it might not work, but its a very good bet. If it doesn't work you might want to go to microsoft and poke around for a driver that will be updated and more suitable, depending on the age of your software and equipment.

Shroomster · 09-23-2009, 01:29 PM

well I updated my graphics driver (never updated it for 6 years). I have a plethora of usable screen sizes now. I think I'm going to stick with 1280x720 with 32 bit color @ 60 hz

everything shows up and no horizontal slide-bar anymore. thanks for the clarifications and help!

Bob Dog · 09-23-2009, 01:30 PM

excellent! and when I get the time I'm going to read up on lcd monitors so I can update my knowledge. go geeks go.

09-22-2009, 03:03 PM	#1
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	Display size we had this one time in o/t section where everyone said what size there screens were. I'm bringing this concern up over here before it ruins a thread about a members boosted s2000. anyways. I'd just like to say I have a 22" (horizontal) screen I never figured out how to set up the display size correctly. what I'm trying to say is this: my screen for Yarisworld is cut off I get the upper task bar over to search and then I have to scroll over. hope that makes sense. is this an error on my part or YW?

09-22-2009, 03:08 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	you should be able to increase your screen resolution and see the whole thing. I can change my monitor settings and duplicate what you see. Mine is currently set to 1280 x 800 __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

09-22-2009, 04:45 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	refresh rates I don't know much about. Is that a function of the graphics card or the monitor itself? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

09-23-2009, 08:28 AM	#9
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	@Shroomster: Please post the monitor model and I'll try to see if I can find some information on it. AFAIK you shouldn't set your refresh rate to anything higher than 60Hz if it's an LCD. __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

09-23-2009, 12:39 PM	#11
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	I should have said that TK, thank you. These days if your computer recognizes your monitor, plug and play will usually block damaging refresh rates, but I don't know what it will do with a tv. Last edited by Bob Dog; 09-23-2009 at 12:51 PM.

09-22-2009, 03:14 PM	#3
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	yeah....it's on my end you're right Garm. I just adjusted it unfortunately I can't get a refresh rate higher than 75mhz oh well

09-22-2009, 06:15 PM	#5
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	I thought it was the processor for the Tv (in this case at least I'm using a tv as the display) I think the graphics card for the refresh rate of a monitor....but at any rate the card is refreshing the tv @ 75hz max on this display....I guess it's ok. so bottom line is my display settings were out of whack not the websites hehe...

09-22-2009, 07:57 PM	#6
wiliker Drives: 2008 Yaris LB Join Date: Aug 2009 Location: Hercules,CA Posts: 60	1680x1050 is my setting on my 22" screen. Give that a shot.

09-23-2009, 07:13 AM	#8
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	I run a 22' monitor and keep mine at 1680x1050 refresh rate 60 hertz and I can see everything on every web site in correct symetry. Refresh rates are how often your graphics card or MB onboard graphics device sends a new signal your the pixels in your monitor. Refresh rates effect different monitors differently depending on the image latentcy (how long a pixel stays visable after it has been sent) Generally speaking the higher the refresh rate the better the image.

09-23-2009, 12:37 PM	#10
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	^^^really? C-NET specs Dynex website specs

09-23-2009, 01:05 PM	#12
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	It's quite possible you will be able to get other possible resolutions if you set the refresh rate to 60Hz. LCD doesn't refresh the way old CRTs do. See http://bit.ly/Hq4Sg for more info __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

09-23-2009, 01:18 PM	#13
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	Yeah, set the refresh rate 60 and see what resolutions show up on the dropdown menu it might not work, but its a very good bet. If it doesn't work you might want to go to microsoft and poke around for a driver that will be updated and more suitable, depending on the age of your software and equipment.

09-23-2009, 01:29 PM	#14
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	well I updated my graphics driver (never updated it for 6 years). I have a plethora of usable screen sizes now. I think I'm going to stick with 1280x720 with 32 bit color @ 60 hz everything shows up and no horizontal slide-bar anymore. thanks for the clarifications and help!

09-23-2009, 01:30 PM	#15
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	excellent! and when I get the time I'm going to read up on lcd monitors so I can update my knowledge. go geeks go. Last edited by Bob Dog; 09-23-2009 at 02:03 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Pipe Size (Tamaño del tubo de escape)	carlosh	Central and South America	11	08-02-2007 05:15 PM