![]() |
|
|
|
#1 |
![]() Drives: 2007 red 2 door Join Date: Aug 2010
Location: jackson, ms
Posts: 6
|
8" subs in rear speaker location 3 dr
Hello good people, brand new here. haven't even picked up my yaris yet, I get it thursday.
quick background: was the I.C.E. moderator at 7thgencivic.com for years, kinda disappeared from the audio world, but im back Has anyone tried putting 8's in the rear speaker mounting location of the 3 door? |
|
|
|
|
|
#2 |
|
Y4R1Z
|
I think I remember reading about someone doing that. Or at least talking about doing that. I put in some 6x9 but it's nothing like a professional install. It's my own custom work though :)
|
|
|
|
|
|
#3 |
|
やりすぎだ~
|
Looks possible, but probably need to find a way to support it and sound deaden behind because the sheetmetal on these cars are THIN!
|
|
|
|
|
|
#4 |
![]() Drives: 2007 red 2 door Join Date: Aug 2010
Location: jackson, ms
Posts: 6
|
there would definitely be some reinforcement, and either a sealed enclosure or the sealing off of the whole panel for an IB environment.
|
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 08 Yaris Sedan Join Date: Oct 2008
Location: California - Bay Area
Posts: 2,773
|
http://www.yarisworld.com/forums/showthread.php?t=28620
I put these in the rear deck of my sedan. Shouldn't be too difficult to modify to make them fit in the LB. Supposedly they have the same footprint of a 8" sub while utilizing the size of a 6x9. Although they are a bit larger than 6x9. Typical 6x9 opening requires a adapter plate for Toyota. Without the adapter plate this just barely fits in the opening with no clearance. Expect horrible rattle afterwards though unless you dynomat the entire surrounding area. |
|
|
|
|
|
#6 |
|
Roadrunner Jr.
|
The Image Dynamics ID8 should work well in that environment...
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
|
|
|
|
|
#7 |
![]() Drives: 2007 red 2 door Join Date: Aug 2010
Location: jackson, ms
Posts: 6
|
SQCOMP, I've actually got a pair of brand new peerless SLS 8's from an old project that never got finished.
In addition, the ID8 would limit me to 100-110 hz, where the SLS would allow me to go up higher. I'm gonna try to see how high I can run them without pulling the stage too far back. 150 - 200 hz maybe. I'll be running the stock deck into a PPI DCX-730 processor I've got in a box somewhere. My line of work has me parking in questionable neighborhoods late at night so this will definitely be a stealth daily driver install. Last edited by ludlamtheory; 08-23-2010 at 09:13 PM. |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 08:03 AM |
| How to route speaker wire to rear doors? | DFA | In Car Entertainment + Electronics (audio / video / alarm) | 2 | 04-04-2010 05:53 PM |
| rear speaker wires, help | stu 1 | UK | 3 | 04-02-2010 05:41 PM |
| YARIS LB CUSTOM REAR SUB FLOOR HOLD TWO 10" SUBS | pennyracer | Items for Sale by private party | 4 | 07-09-2009 01:00 AM |
| 6.5" Subs in rear? Mounting depth | Yucky Darren | In Car Entertainment + Electronics (audio / video / alarm) | 5 | 04-19-2007 03:46 PM |