i hate waiting - Toyota Yaris Forums

Dperry · 03-07-2011, 10:36 AM

waiting on weapon r intake and dc exhaust....i wish i had more patience. pics and vids to follow for those that r interested

*tk-421* · 03-07-2011, 01:50 PM

It's worth every second once the stuff gets there...
Delayed gratification FTW

quemoto · 03-07-2011, 03:54 PM

TK is right, and when you put that intake in be ready for some awesome induction noise when you jump on it. Makes the the Yaris sound like the 1.8 liter MR2

yaris2010RS · 03-07-2011, 03:58 PM

weapon R intake is epic, u will love it

Dperry · 03-07-2011, 04:48 PM

the intake is coming with the ram air tube...im tryen to think of ways to be creative and run it thru the bumper with a vilocity stack or not use it at all wut do u guys think

Trubin · 03-07-2011, 06:45 PM

here's something for you to drool on while you wait, hehe.

quemoto · 03-07-2011, 06:55 PM

I have a SRI setup on mine, granted its not a Weapon R is a Simota but it was actually a CAI and I shortened it and felt a better power gain plus more growl. Mine is setup similar to Trubin's and I love it that way. Just careful on placement and get a hood seal... Microimage has em.

Dperry · 03-07-2011, 07:45 PM

trubin...did urs come with the ram-air hose?

Trubin · 03-07-2011, 08:20 PM

I think so, it came with all of this stuff right here

I dint use that 5ft long (extended)flexible ram air tube, I am guessing that's if you wanna lower the intake somewhere to the bottom of the engine bay. But that little hose on the side that brings the fueled gasses with fresh air was pretty long I ended up cutting it I think I still have some left.
http://www.yarisworld.com/forums/sho...ghlight=weapon

Dperry · 03-07-2011, 08:33 PM

yea the ram air hose u can do a few things with u can rout it thru ur bumper and fab it up so it looks nice but its for direct ram air

quemoto · 03-07-2011, 09:54 PM

I would be slightly afraid of having an outside intake only due to water locking the engine, but if you do want to run it out there I bet you could get clever with the tow loop cover and punch a hole in that. That way you can always get a new cover if u get different intake later. A quick trip to Tractor Supply should hook u up with all the tubing and a nice brushing to mount it slickly (yes that is a word)

Dperry · 03-07-2011, 10:38 PM

i saw a pic of someones yaris from here they ran a ram air thru there headlight and another to a functional hoodscoop, it risky buisness here on the east coast wouldnt b bad for ppl in dryer areas

Carter05xb · 03-07-2011, 10:42 PM

Weapon-R Nice stuff

Dperry · 03-07-2011, 10:47 PM

my intake just came today im prob gunna hook it all up on wensday...still waiting for my exhaust from microimage....GARM IM SO IMPATIENT. haha

Carter05xb · 03-07-2011, 11:31 PM

Take pics when your done!

Dperry · 03-08-2011, 12:11 AM

haha no worries pics and vid to come

Trubin · 03-08-2011, 05:46 PM

Air doesn't like to make all kinds of bends and turn through piping. Imo simple tube without bends would be more efficient.

Carter05xb · 03-08-2011, 05:53 PM

True, the straighter it is the less resistance you will encounter. But with what he is doing I think it will be a good setup.

Rock on dude.

03-07-2011, 10:36 AM	#1
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	i hate waiting waiting on weapon r intake and dc exhaust....i wish i had more patience. pics and vids to follow for those that r interested

03-07-2011, 01:50 PM	#2
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	It's worth every second once the stuff gets there... Delayed gratification FTW __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

03-07-2011, 03:54 PM	#3
quemoto Bout to be Boosted Drives: '09 Yaris LB 3 Door Join Date: Sep 2009 Location: Ohio Posts: 22	TK is right, and when you put that intake in be ready for some awesome induction noise when you jump on it. Makes the the Yaris sound like the 1.8 liter MR2 __________________ 2009 3 Door Liftback - Simota SRI, TRD Sway Bar, Microimage HID 6000k Headlights and Fogs, Motegi SP10 Hyperblack 17" wheels w/Toyo Proxies 4, Microimage 1.8" Lowering Springs 1989 Toyota Pickup - The winter beast and general purpose Auto Zone runner when the Yaris is down for upgrades.

03-07-2011, 03:58 PM	#4
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	weapon R intake is epic, u will love it __________________ If it has boobs or wheels sooner or later your gonna have problems with it

03-07-2011, 06:55 PM	#7
quemoto Bout to be Boosted Drives: '09 Yaris LB 3 Door Join Date: Sep 2009 Location: Ohio Posts: 22	I have a SRI setup on mine, granted its not a Weapon R is a Simota but it was actually a CAI and I shortened it and felt a better power gain plus more growl. Mine is setup similar to Trubin's and I love it that way. Just careful on placement and get a hood seal... Microimage has em. __________________ 2009 3 Door Liftback - Simota SRI, TRD Sway Bar, Microimage HID 6000k Headlights and Fogs, Motegi SP10 Hyperblack 17" wheels w/Toyo Proxies 4, Microimage 1.8" Lowering Springs 1989 Toyota Pickup - The winter beast and general purpose Auto Zone runner when the Yaris is down for upgrades.

03-07-2011, 04:48 PM	#5
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	the intake is coming with the ram air tube...im tryen to think of ways to be creative and run it thru the bumper with a vilocity stack or not use it at all wut do u guys think

03-07-2011, 06:45 PM	#6
Trubin Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2011 Location: Brooklyn, NY Posts: 70	here's something for you to drool on while you wait, hehe.

03-07-2011, 07:45 PM	#8
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	trubin...did urs come with the ram-air hose?

03-07-2011, 08:20 PM	#9
Trubin Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2011 Location: Brooklyn, NY Posts: 70	I think so, it came with all of this stuff right here I dint use that 5ft long (extended)flexible ram air tube, I am guessing that's if you wanna lower the intake somewhere to the bottom of the engine bay. But that little hose on the side that brings the fueled gasses with fresh air was pretty long I ended up cutting it I think I still have some left. http://www.yarisworld.com/forums/sho...ghlight=weapon

03-07-2011, 08:33 PM	#10
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	yea the ram air hose u can do a few things with u can rout it thru ur bumper and fab it up so it looks nice but its for direct ram air

03-07-2011, 09:54 PM	#11
quemoto Bout to be Boosted Drives: '09 Yaris LB 3 Door Join Date: Sep 2009 Location: Ohio Posts: 22	I would be slightly afraid of having an outside intake only due to water locking the engine, but if you do want to run it out there I bet you could get clever with the tow loop cover and punch a hole in that. That way you can always get a new cover if u get different intake later. A quick trip to Tractor Supply should hook u up with all the tubing and a nice brushing to mount it slickly (yes that is a word) __________________ 2009 3 Door Liftback - Simota SRI, TRD Sway Bar, Microimage HID 6000k Headlights and Fogs, Motegi SP10 Hyperblack 17" wheels w/Toyo Proxies 4, Microimage 1.8" Lowering Springs 1989 Toyota Pickup - The winter beast and general purpose Auto Zone runner when the Yaris is down for upgrades.

03-07-2011, 10:38 PM	#12
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	i saw a pic of someones yaris from here they ran a ram air thru there headlight and another to a functional hoodscoop, it risky buisness here on the east coast wouldnt b bad for ppl in dryer areas

03-07-2011, 10:42 PM	#13
Carter05xb Banned Drives: 05xb Join Date: Mar 2011 Location: Georgia Posts: 18	Weapon-R Nice stuff

03-07-2011, 10:47 PM	#14
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	my intake just came today im prob gunna hook it all up on wensday...still waiting for my exhaust from microimage....GARM IM SO IMPATIENT. haha

03-07-2011, 11:31 PM	#15
Carter05xb Banned Drives: 05xb Join Date: Mar 2011 Location: Georgia Posts: 18	Take pics when your done!

03-08-2011, 12:11 AM	#16
Dperry View User's Garage Drives: 2007 black yaris hb Join Date: Feb 2011 Location: bushkill, pa Posts: 182	haha no worries pics and vid to come

03-08-2011, 05:46 PM	#17
Trubin Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2011 Location: Brooklyn, NY Posts: 70	Air doesn't like to make all kinds of bends and turn through piping. Imo simple tube without bends would be more efficient.

03-08-2011, 05:53 PM	#18
Carter05xb Banned Drives: 05xb Join Date: Mar 2011 Location: Georgia Posts: 18	True, the straighter it is the less resistance you will encounter. But with what he is doing I think it will be a good setup. Rock on dude.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I hate birds!!!!	Buckethead	DIY / Maintenance / Service	19	03-17-2012 10:06 PM
Have I mentioned how much I hate Speed sensors?	staticorex	General Yaris / Vitz Discussion	13	05-28-2009 04:04 PM
guess what I'm waiting for and how much I paid?	Ric n Sov's Vitz RS	General Yaris / Vitz Discussion	27	06-27-2007 07:36 PM
Hate for Yaris?	redyaris	General Yaris / Vitz Discussion	35	03-01-2007 07:58 PM
Waiting on my ride	wibrian	Great Lakes	23	11-19-2006 08:05 AM