Suspension question? - Toyota Yaris Forums

Mister Z · 03-05-2011, 04:41 AM

The purpose of camber bolts to fix any camber issues correct? is there any camber bolts for the rear? and Also are camber bolts necessary if I plan to run negative camber? Thanks everyone!

Bluevitz-rs · 03-05-2011, 09:57 AM

There is no adjustment for the rear.

The bolts you speak of replace the bolts holding the struts to the hub. They allow you to change front camber.

WeeYari · 03-05-2011, 11:41 AM

Quote:

Originally Posted by Mister Z

is there any camber bolts for the rear?

Shims (ie stainless steel washers) placed between the axle and brake drum on the lower two bolts.

severous01 · 03-05-2011, 08:39 PM

hunter makes a shim kit also. it's much easier and a more direct use for hunter aligners. if you're rear alignment is out and they say that they can't do the rear cuz there's no adjustment...buy a shim kit for 10 bucks and have them install it. specially if they're using hunter machines.

you can buy shims from hunter.com.

ilikerice · 03-06-2011, 06:16 PM

microimageonline.com also sells rear camber shims

03-05-2011, 04:41 AM	#1
Mister Z Drives: 08 Yaris HB Join Date: Nov 2009 Location: Rancho Cucamonga, CA Posts: 282	Suspension question? The purpose of camber bolts to fix any camber issues correct? is there any camber bolts for the rear? and Also are camber bolts necessary if I plan to run negative camber? Thanks everyone!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New to Forum -suspension question!!	SparkyTheYaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	09-09-2010 05:11 PM
Noobie suspension question??	Richie76	Australia	6	12-27-2009 10:27 PM
Yet another suspension question	mastaofdisasta	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	9	04-16-2009 03:19 PM
n00b suspension install question	The Stig	DIY / Maintenance / Service	25	07-12-2007 09:58 AM
Technical Question for the Suspension Gurus	KwonSau	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	5	06-22-2007 12:31 AM

03-05-2011, 09:57 AM	#2
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	There is no adjustment for the rear. The bolts you speak of replace the bolts holding the struts to the hub. They allow you to change front camber.

03-05-2011, 08:39 PM	#4
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	hunter makes a shim kit also. it's much easier and a more direct use for hunter aligners. if you're rear alignment is out and they say that they can't do the rear cuz there's no adjustment...buy a shim kit for 10 bucks and have them install it. specially if they're using hunter machines. you can buy shims from hunter.com.

03-06-2011, 06:16 PM	#5
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	microimageonline.com also sells rear camber shims