Help me Find some parts :) - Toyota Yaris Forums

pc1x1 · 03-21-2007, 01:43 PM

Ok I am looking for a few simple parts, with the cheapest price possible. I have used the power that is google, as well as ebay, and various vender's, here though maybe someone can post a magic link :).

I am looking for,
C-One Eyelids, or any generic yet practical good looking eyelid for the Yaris.
TRD emblems, same rule applies
TRD Exhaust,
Lightweight wheels,
Spoiler
and Hood
HIDs
A good yet economical Air Filter, as long as I save on MPG, price isn't a problem ;).

I am partial to the sleeper car appearance, though I do like the car to be subtly distinctive.

Its for a Yaris Hatch

*Chris07LB* · 03-21-2007, 01:44 PM

SEARCH, most parts you listed have been installed here, and we have plenty of supporting vendors that can get you straight.

pc1x1 · 03-21-2007, 01:47 PM

Yes I know, I read most threads on the forum, especially your HID one's Chris, I am just trying to see if I missed anything, also some prices were a bit off my budget, while others were ok, I am hoping by creating this thread, I can centralize a focus, so theres some competition and I can save some money :).

ChinoCharles · 03-21-2007, 02:21 PM

Quote:

C-One Eyelids, or any generic yet practical good looking eyelid for the Yaris.

Did someone say eyelids?

Picture-002.jpg

12 bucks and some masking tape. Can't beat that.

Quote:

TRD emblems, same rule applies

All over Ebay. I picked these up for my B pillars. Keep in mind you'll find more emblems by searching for "TRD Tacoma emblem" than "TRD Yaris emblem." These were listed for the Tacoma.

Picture-004.jpg

Quote:

TRD Exhaust

trdsparks.com

Quote:

Lightweight wheels

Vendor C2AUTOSPL sells Konig's on the cheap

Quote:

Spoiler

trdsparks.com for USDM, a willing Canadian member for CDM, C2AUTOSPL for JDM C-ONE

Quote:

and Hood

http://yarisworld.com/forums/showthread.php?t=1240

Quote:

HIDs

Tons of choices in the sponsor forum

Quote:

A good yet economical Air Filter, as long as I save on MPG, price isn't a problem ;).

I'll have a whole short ram system on the market soon for a reasonable price, or just grab a K&N high-flow filter.

Badda-bing.

Quote:

I am partial to the sleeper car appearance, though I do like the car to be subtly distinctive.

Me too.

Picture-001.jpg

I'm some rims and paint away from being happy with the exterior, and best of all I'm gonna do it without breaking the bank. Price is a concern for me, too... not because I don't have the money, but because I don't like spending a quarter of what I make on my car.

*Chris07LB* · 03-21-2007, 02:38 PM

He said eyelids, NOT eye shadow..

drag queen

ChinoCharles · 03-21-2007, 02:42 PM

Chris, don't make me slap that sombrero off your noodle.

In that case doesn't 3M make some adhesive something-or-other you could cut and paint to your specs? Better than shipping something that dinky from Japan.

"Yes sir, that will be $20 plus $45 shipping."

Do you ever HELP or do you just BANTER?

*Chris07LB* · 03-21-2007, 02:47 PM

I go now.

ChinoCharles · 03-21-2007, 02:51 PM

Aw Chris, I kid I kid. You can do no wrong after that comment about Vin Diesel and the laptop.

These look thin and flexible. Think they could be cut and fit?

http://cgi.ebay.com/ebaymotors/01-03...93091532QQrdZ1

... EYESHADOW!?!? You have me thinking of stripping them now asshole!

Yaris_PR · 03-21-2007, 03:57 PM

ROCKLANDTOYOTA · 03-21-2007, 04:48 PM

Quote:

Originally Posted by Chris07LB

He said eyelids, NOT eye shadow..

drag queen

WOW thats fucked up.....

365Motorwerks · 03-21-2007, 06:16 PM

PM'd ya

ChinoCharles · 03-21-2007, 10:04 PM

Quote:

Originally Posted by ROCKLANDTOYOTA

WOW thats fucked up.....

Not as bad as his new Myspace is gonna be.

pc1x1 · 03-21-2007, 11:42 PM

Hahaha, Yea Chino thanks for the links! I am well acquainted with your Yaris, I read alot of posts here, So I got a good idea on how everyone is ;). I like your idea, though I would like the eyelids to be a bit smaller, and more aggressive looking. Kinda like an S14's eyelids. The yaris is a great car, but it looks so darn happy, now the cuteness is nice, but I am 5'11 male, sometimes its just O_O. Maybe we can figure out together how to do it, I like C-One's eyelids, but I refuse to pay the premium for what is nothing more than plastic with tape.

365Motorwerks Thanks for the speedy responce, I am looking into it :), and man I like those seats, but darn the kevlar one is so uber pricey. Again its due to material costs, but above my budget unfortunately.

ChinoCharles · 03-22-2007, 01:22 AM

I have an idea.

Picture-002.jpg

Required:

http://k-mac-plastics.net/abs-sheet.htm (unsure on the thickness)
http://www.autobodysupply.net/store/...E-70C0CE55FC71
Paint of your choice

This could be something to tackle when it gets warm out.

pc1x1 · 03-22-2007, 02:30 AM

Yea looks interesting, for my lids, I am thinking of a Straight cut down, aka trying to get out of the bubbly look, and more boxy. Ironic eh?

*Chris07LB* · 03-22-2007, 06:57 AM

Quote:

Originally Posted by ChinoCharles

Not as bad as his new Myspace is gonna be.

C2AUTOSPL · 03-22-2007, 03:05 PM

Quote:

Originally Posted by pc1x1

Ok I am looking for a few simple parts, with the cheapest price possible. I have used the power that is google, as well as ebay, and various vender's, here though maybe someone can post a magic link :).

I am looking for,
C-One Eyelids, or any generic yet practical good looking eyelid for the Yaris.
TRD emblems, same rule applies
TRD Exhaust,
Lightweight wheels,
Spoiler
and Hood
HIDs
A good yet economical Air Filter, as long as I save on MPG, price isn't a problem ;).

I am partial to the sleeper car appearance, though I do like the car to be subtly distinctive.

Its for a Yaris Hatch

Eyelids we can get for you.

LIghtweight wheels, yes..

Hood i can get SEIBON for you..

PM me for pricing...

eijikikimaru · 03-22-2007, 07:52 PM

Dang would you look at that. C2auto comes to you fully loaded with some of the items you ask for... this post sure is working out well

03-21-2007, 01:43 PM	#1
pc1x1 Drives: Yaris 2007 Liftback (Jan 07) Join Date: Nov 2006 Location: Florida Posts: 55	Help me Find some parts :) Ok I am looking for a few simple parts, with the cheapest price possible. I have used the power that is google, as well as ebay, and various vender's, here though maybe someone can post a magic link :). I am looking for, C-One Eyelids, or any generic yet practical good looking eyelid for the Yaris. TRD emblems, same rule applies TRD Exhaust, Lightweight wheels, Spoiler and Hood HIDs A good yet economical Air Filter, as long as I save on MPG, price isn't a problem ;). I am partial to the sleeper car appearance, though I do like the car to be subtly distinctive. Its for a Yaris Hatch

03-22-2007, 01:22 AM	#14
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I have an idea. Picture-002.jpg Required: http://k-mac-plastics.net/abs-sheet.htm (unsure on the thickness) http://www.autobodysupply.net/store/...E-70C0CE55FC71 Paint of your choice This could be something to tackle when it gets warm out. Last edited by ChinoCharles; 03-22-2007 at 02:06 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LF: Yaris / Vitz / Echo hatch accessories / parts!	Keej_05RS	General Yaris / Vitz Discussion	3	12-08-2008 10:43 PM
Yarisworld Parts List - Work in progress	vodkalush	General Yaris / Vitz Discussion	5	02-13-2007 07:12 PM
Parts wish list	ChinoCharles	General Yaris / Vitz Discussion	12	11-30-2006 11:44 PM
Whats a Good Parts Website	jthebeh	Performance Modifications	2	11-29-2006 09:32 PM
What kind of parts you guys want?	Hyde	General Yaris / Vitz Discussion	28	09-19-2006 01:12 AM

03-21-2007, 01:44 PM	#2
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	SEARCH, most parts you listed have been installed here, and we have plenty of supporting vendors that can get you straight.

03-21-2007, 01:47 PM	#3
pc1x1 Drives: Yaris 2007 Liftback (Jan 07) Join Date: Nov 2006 Location: Florida Posts: 55	Yes I know, I read most threads on the forum, especially your HID one's Chris, I am just trying to see if I missed anything, also some prices were a bit off my budget, while others were ok, I am hoping by creating this thread, I can centralize a focus, so theres some competition and I can save some money :).

03-21-2007, 02:42 PM	#6
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Chris, don't make me slap that sombrero off your noodle. In that case doesn't 3M make some adhesive something-or-other you could cut and paint to your specs? Better than shipping something that dinky from Japan. "Yes sir, that will be $20 plus $45 shipping." Do you ever HELP or do you just BANTER?

03-21-2007, 02:47 PM	#7
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	I go now.

03-21-2007, 02:51 PM	#8
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Aw Chris, I kid I kid. You can do no wrong after that comment about Vin Diesel and the laptop. These look thin and flexible. Think they could be cut and fit? http://cgi.ebay.com/ebaymotors/01-03...93091532QQrdZ1 ... EYESHADOW!?!? You have me thinking of stripping them now asshole!

03-21-2007, 03:57 PM	#9
Yaris_PR Drives: Red Yaris Hatchback on 18's Join Date: Jul 2006 Location: Puerto Rico Posts: 270

03-21-2007, 06:16 PM	#11
365Motorwerks Drives: Small and Black Join Date: Mar 2007 Location: Nor Cal Posts: 63	PM'd ya

03-21-2007, 11:42 PM	#13
pc1x1 Drives: Yaris 2007 Liftback (Jan 07) Join Date: Nov 2006 Location: Florida Posts: 55	Hahaha, Yea Chino thanks for the links! I am well acquainted with your Yaris, I read alot of posts here, So I got a good idea on how everyone is ;). I like your idea, though I would like the eyelids to be a bit smaller, and more aggressive looking. Kinda like an S14's eyelids. The yaris is a great car, but it looks so darn happy, now the cuteness is nice, but I am 5'11 male, sometimes its just O_O. Maybe we can figure out together how to do it, I like C-One's eyelids, but I refuse to pay the premium for what is nothing more than plastic with tape. 365Motorwerks Thanks for the speedy responce, I am looking into it :), and man I like those seats, but darn the kevlar one is so uber pricey. Again its due to material costs, but above my budget unfortunately.

03-22-2007, 02:30 AM	#15
pc1x1 Drives: Yaris 2007 Liftback (Jan 07) Join Date: Nov 2006 Location: Florida Posts: 55	Yea looks interesting, for my lids, I am thinking of a Straight cut down, aka trying to get out of the bubbly look, and more boxy. Ironic eh?

03-22-2007, 07:52 PM	#18
eijikikimaru Q(','Q) View User's Garage Drives: 3dr Meteroite Join Date: Jan 2007 Location: So. CaL Posts: 399	Dang would you look at that. C2auto comes to you fully loaded with some of the items you ask for... this post sure is working out well