Power Mirror Wiring

[A1phazu1u]

My 07 sedan doesn't have the pre-installed wiring for the power mirrors. I can figure out how to wire it myself, but my question is; does anyone know how much voltage should be running through the switch? Thanks in advance

[MickZEL]

as elsewhere 12V

[CTScott]

Originally Posted by A1phazu1u

My 07 sedan doesn't have the pre-installed wiring for the power mirrors. I can figure out how to wire it myself, but my question is; does anyone know how much voltage should be running through the switch? Thanks in advance

Is the wiring missing in the doors or is it missing for the switch?

[A1phazu1u]

Originally Posted by CTScott

Is the wiring missing in the doors or is it missing for the switch?

Both good sir.

[CTScott]

Originally Posted by A1phazu1u

Both good sir.

Really? I wonder if that is a sedan thing, as the liftbacks without power mirrors definitely are prewired. I wonder if anyone else with a non-power sedan has tried upgrading the mirrors?


To see the door wire connector you have to pull the door panel:
Mirror Connector.jpg

The switch connector was taped to the harness at the top of the under-dash fuse panel:
Switch Connector.jpg


If you remove the driver's side kick panel and look at the bottom connector, do you have the black and sky blue wires on the top left of the connector shown here?

Kick Panel Connectors.jpg

[nookandcrannycar]

Originally Posted by CTScott

the liftbacks without power mirrors definitely are prewired.

Is this the case for all model years re the USDM 2nd generation liftbacks?

[CTScott]

Originally Posted by nookandcrannycar

Is this the case for all model years re the USDM 2nd generation liftbacks?

As far as I know - Yes. I know for sure that 08 and 09 liftbacks without power are prewired, but I haven't seen for sure with 07. If your 07 doesn't have power, check for the switch connector, as that one only requires popping the change cup.

MicZel has an 07 Sedan, that was a USDM Yaris that eventually made its way to Russia. His is pre-wired, as I am in the process of sending him a care package to convert his mirrors to power.

[Kaotic Lazagna]

The next time I remove my door panel, I'll see if mine is pre-wired as my car came with nothing, no power anything, no ABS, etc. I'll try to look tomorrow at the interior fuse box to see if I have those wires.

[A1phazu1u]

@CTScott
I have no such wiring :(

[CTScott]

Originally Posted by A1phazu1u

@CTScott
I have no such wiring :(

Interesting. If you still want to use the power mirrors, I have the harness from the switch to the mirrors available. You would then just need to run the three wires from the kick panel into the doors.

[jcboy]

Originally Posted by CTScott

Interesting. If you still want to use the power mirrors, I have the harness from the switch to the mirrors available. You would then just need to run the three wires from the kick panel into the doors.

hi scott, to put the power mirrors we have here in manila is in my pipeline. but the ones we have here are power retract with turn signal indicators. does the wiring that you're selling have any difference? how much are you giving it away for anyway?

also, i havent checked the skyblue and black wires that you mentioned, but i don't have the big connector hidden anywhere near the junction box (behind the removable sunglass holder (?))

[CTScott]

Originally Posted by jcboy

hi scott, to put the power mirrors we have here in manila is in my pipeline. but the ones we have here are power retract with turn signal indicators. does the wiring that you're selling have any difference? how much are you giving it away for anyway?

also, i havent checked the skyblue and black wires that you mentioned, but i don't have the big connector hidden anywhere near the junction box (behind the removable sunglass holder (?))

If you don't have the connector for the power mirrors, then it makes sense that the sky blue and black wires are missing as well. With the harness that I have you would need to add two additional pins to the connector for the folding.

For the turn signals, you would have to wire them directly to the wiring that feeds the front and rear turn signals. I could do $30 + shipping for the harness, including the two extra pins.

[Kar98]

Hmmmm... This is the single one issue that irks me the most about mine, that there aren't even manual remote adjusters for the mirrors. If you're saying they're pre-wired... I'm gonna go and check :)

[Kar98]

So, like these?

http://www.ebay.com/itm/Outside-Side...b0e26b&vxp=mtr

Image for future reference:

http://i.imgur.com/0bNTJqh.jpg

[CTScott]

Originally Posted by Kar98

So, like these?

http://www.ebay.com/itm/Outside-Side...b0e26b&vxp=mtr

Image for future reference:

http://i.imgur.com/0bNTJqh.jpg

Exactly. Did you check and verify that you are pre-wired?

[Kar98]

Originally Posted by CTScott

Exactly. Did you check and verify that you are pre-wired?

Hmmm... not sure? I could take better pictures with an actual camera, if needed.

http://imgur.com/a/EMawE

[CTScott]

Originally Posted by Kar98

Hmmm... not sure? I could take better pictures with an actual camera, if needed.

http://imgur.com/a/EMawE

The connector in the second picture (where I believe I also saw bigfoot and the loch ness monster) looks like the correct one for the power mirror switch. It is a ten pin single row connector with 7 positions occupied with wires. I have one of the switches for sale if you need the switch.

[Kar98]

Originally Posted by CTScott

The connector in the second picture (where I believe I also saw bigfoot and the loch ness monster) looks like the correct one for the power mirror switch. It is a ten pin single row connector with 7 positions occupied with wires. I have one of the switches for sale if you need the switch.

I saw. That's what reminded me of this thread and prompted me to take the pics

Just gonna see if there's any meteorite gray power mirrors for sale somewhere... and figure out how to swap them...