Power Mirror Wiring

[CTScott]

Originally Posted by A1phazu1u

My 07 sedan doesn't have the pre-installed wiring for the power mirrors. I can figure out how to wire it myself, but my question is; does anyone know how much voltage should be running through the switch? Thanks in advance

Is the wiring missing in the doors or is it missing for the switch?

[A1phazu1u]

Originally Posted by CTScott

Is the wiring missing in the doors or is it missing for the switch?

Both good sir.

[CTScott]

Originally Posted by A1phazu1u

Both good sir.

Really? I wonder if that is a sedan thing, as the liftbacks without power mirrors definitely are prewired. I wonder if anyone else with a non-power sedan has tried upgrading the mirrors?


To see the door wire connector you have to pull the door panel:
Mirror Connector.jpg

The switch connector was taped to the harness at the top of the under-dash fuse panel:
Switch Connector.jpg


If you remove the driver's side kick panel and look at the bottom connector, do you have the black and sky blue wires on the top left of the connector shown here?

Kick Panel Connectors.jpg

[nookandcrannycar]

Originally Posted by CTScott

the liftbacks without power mirrors definitely are prewired.

Is this the case for all model years re the USDM 2nd generation liftbacks?

[CTScott]

Originally Posted by nookandcrannycar

Is this the case for all model years re the USDM 2nd generation liftbacks?

As far as I know - Yes. I know for sure that 08 and 09 liftbacks without power are prewired, but I haven't seen for sure with 07. If your 07 doesn't have power, check for the switch connector, as that one only requires popping the change cup.

MicZel has an 07 Sedan, that was a USDM Yaris that eventually made its way to Russia. His is pre-wired, as I am in the process of sending him a care package to convert his mirrors to power.

[Kar98]

Originally Posted by CTScott

As far as I know - Yes. I know for sure that 08 and 09 liftbacks without power are prewired, but I haven't seen for sure with 07. If your 07 doesn't have power, check for the switch connector, as that one only requires popping the change cup.

MicZel has an 07 Sedan, that was a USDM Yaris that eventually made its way to Russia. His is pre-wired, as I am in the process of sending him a care package to convert his mirrors to power.

And what, good sir, would this care package contain, he asked, wondering how complicated it would be to convert non adjustable mirrors to power mirrors.

[CTScott]

Originally Posted by Kar98

And what, good sir, would this care package contain, he asked, wondering how complicated it would be to convert non adjustable mirrors to power mirrors.

The package contained all kinds of goodies! For the power mirror conversion, literally all that is required (provided that you car is pre-wired) is the remote mirror switch ($50 to $100 depending on new or used) and about $40 each for good quality, new, aftermarket mirrors.