Sizing Help on Lowered Yaris

[lightdisc2]

I have a 2008 Toyota Yaris hatchback, and am looking to get 15x6.5 +35mm wheels and 185/60/R15 84H tires. The car is lowered on Tein lowering springs. There is still a little bit of wheel gap. I can measure the wheel gap if needed, or you can tell me another way to know how much it is lowered as I bought the car this way.

With this wheel and tire combination with +35mm offset should I expect to have rubbing issues?

Thanks for the help.

[mitch9521]

As far as I know, Tein only makes one spring series for the NCP91 and it apparently drops the car 1.9" front and rear.

[lightdisc2]

Originally Posted by mitch9521

As far as I know, Tein only makes one spring series for the NCP91 and it apparently drops the car 1.9" front and rear.

Yes it looks like about 2 inches so it's probably 1.9". Do you know if the 35mm offset is too small and will cause rubbing? Thanks.

[mitch9521]

Originally Posted by lightdisc2

Yes it looks like about 2 inches so it's probably 1.9". Do you know if the 35mm offset is too small and will cause rubbing? Thanks.

Not sure.
I am only dropped 1.5" with 16x7 +40mm Enkei RP02s running 205/45/R16(23.2" tall tires) and I have miles of space.

https://www.wheel-size.com/calc/

Try playing around with this, It might give you a better answer than I can give.

[lightdisc2]

Originally Posted by mitch9521

Not sure.
I am only dropped 1.5" with 16x7 +40mm Enkei RP02s running 205/45/R16(23.2" tall tires) and I have miles of space.

https://www.wheel-size.com/calc/

Try playing around with this, It might give you a better answer than I can give.

Thanks for the link. I think there probably won't be any issues however it could be close during hard cornering, which I don't want because I use the car a ton.

Anyone else have the same or a similar set up to the sizes I proposed? Also if anyone knows of some nice 15x5.5 (or 15x6) 45mm offset alloys let me know - I can't find any for the life of me.

[sh0rtlife]

i suspect any rub you get will be at "hard lock" and i say this as my my snows are close to a 35 but are TALL which would compensate for the fact im not lowered i know my stock sized wider 14s on 35mm have miles of clearance everywhere

[Neinris]

This guy managed to fit 225/45 R15 with ET25...

https://www.youtube.com/watch?v=DjNMLTyc5aA

In the later videos it shows the car lower. I'm not saying he's not rubbing though...

[Compeer]

Originally Posted by mundosrt

If you are interested in where in the area of the state of California now you can buy yourself a good, sarcastic, quality Alfa Romeo car, then I can give you one very good advice. For example, you should now go to this matching alfa romeo stelvio pico rivera https://findacar.today/dorris-california . You ask why, I will tell you that only here you can buy a real original Alfa Romeo in a good configuration and at a good price here only options that you can find for yourself any model of Alfa Real and pretty much quickly buy it all contact the seller on this site is very easy.

I dont think you are on the right forum.