Sizing Help on Lowered Yaris

[lightdisc2]

Originally Posted by mitch9521

As far as I know, Tein only makes one spring series for the NCP91 and it apparently drops the car 1.9" front and rear.

Yes it looks like about 2 inches so it's probably 1.9". Do you know if the 35mm offset is too small and will cause rubbing? Thanks.

[mitch9521]

Originally Posted by lightdisc2

Yes it looks like about 2 inches so it's probably 1.9". Do you know if the 35mm offset is too small and will cause rubbing? Thanks.

Not sure.
I am only dropped 1.5" with 16x7 +40mm Enkei RP02s running 205/45/R16(23.2" tall tires) and I have miles of space.

https://www.wheel-size.com/calc/

Try playing around with this, It might give you a better answer than I can give.

[lightdisc2]

Originally Posted by mitch9521

Not sure.
I am only dropped 1.5" with 16x7 +40mm Enkei RP02s running 205/45/R16(23.2" tall tires) and I have miles of space.

https://www.wheel-size.com/calc/

Try playing around with this, It might give you a better answer than I can give.

Thanks for the link. I think there probably won't be any issues however it could be close during hard cornering, which I don't want because I use the car a ton.

Anyone else have the same or a similar set up to the sizes I proposed? Also if anyone knows of some nice 15x5.5 (or 15x6) 45mm offset alloys let me know - I can't find any for the life of me.