1zz Tb on a blitz supercharger ... Any good ?

[CrankyOldMan]

While waiting for my engine to cool off enough to change the oil yesterday, I installed my injen CAI. Some interesting things to note:
* The stock throttle body is TINY compared to the 1ZZ.
* The injen intake isn't a suitable donor for a 1ZZ due to the diameter of the mating end and the limited space to clamp a silicone coupler near the MAF mount.
* Finding an inexpensive aftermarket intake to scavenge a MAF section from is difficult, now that the Simota is not readily available.
* Finding an off-the-shelf 2.25" MAF section is pretty much not going to happen.
* Putting an intake on a supercharged engine makes for some really silly noises.
* There is a LOT of room to get creative in there, provided you can do all the silliness where the OEM intake was--not much clearance at the top of the S/C.

Correction: this may be a suitable alternative source for a MAF section, assuming you can deal with a 3" body:
http://www.spectreperformance.com/in...apter-kit.html